Optimization for testing conditions of inverse gas chromatography and surface energies of various carbon fiber bundles
Source abstract
Abstract
Surface free energy is an important parameter in surface and interface properties of fiber reinforced polymer composite. The BET (Brunauer, Emmett, and Teller) surface area and surface energy of the sample can be obtained by Inverse Gas Chromatography (IGC) based on the adsorption principle. In this paper, surface energy of carbon fiber bundle was tested by means of IGC under different conditions to find reliable test parameters. The main parameters involved include length, mass, and packing density of sample, target fractional surface coverage, flow rate, and maximum elution time. It is demonstrated that IGC has the advantages of simple sample preparation, stable test data, high automation, and high sensitivity for carbon fiber. Among all test conditions, packing density and flow rate have the greatest influences on the experimental results. The optimized test parameters are suitable for various kinds of carbon fiber bundles, including polyacrylonitrile-based and pitch-based carbon fibers with different tensile properties and tow sizes. Moreover, IGC can acutely characterize the surface properties of carbon fibers after carbon nanotube modification and heat treatment, which are hard to carry out using contact angle method.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adsorption, diffusion, and thermodynamic properties of materials · Carbon Nanotubes in Composites · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Liu L, Song YJ, Fu HJ, Jiang ZX, Zhang XZ, Wu LN, Huang YD (2008) The effect of interphase modification on carbon fiber/polyarylacetylene resin composites. Appl Surf Sci 254(17):5342–5347. https://doi.org/10.1016/j.apsusc.2008.02.07810.1016/j.apsusc.2008.02.078 ↗
2. Jacques S, Jouanny I, Ledain O, Maillé L, Weisbecker P (2013) Nanoscale multilayered and porous carbide interphases prepared by pressure-pulsed reactive chemical vapor deposition for ceramic matrix composites. Appl Surf Sci 275:102–109. https://doi.org/10.1016/j.apsusc.2013.01.10010.1016/j.apsusc.2013.01.100 ↗
3. Haihong Jiang D, Kamdem P (2010) Characterization of the surface and the interphase of PVC–copper amine-treated wood composites. Appl Surf Sci 256(14):4559–4563. https://doi.org/10.1016/j.apsusc.2010.02.04710.1016/j.apsusc.2010.02.047 ↗
4. Jiao W, Zheng T, Liu W, Jiao W, Wang R (2019) Molecular dynamics simulations of the effect of sizing agent on the interface property in carbon fiber reinforced vinyl ester resin composite. Appl Surf Sci 479:1192–1199. https://doi.org/10.1016/j.apsusc.2019.02.15710.1016/j.apsusc.2019.02.157 ↗
5. Qing Wu, Yang X, He J, Ye Z, Liu Q, Bai H, Zhu J (2022) Improved interfacial adhesion of epoxy composites by grafting porous graphene oxide on carbon fiber. Appl Surf Sci 573:15160510.1016/j.apsusc.2021.151605 ↗
6. Jager IL (2004) Surface free energy—a possible source of error in nanohardness? Surf Sci 565(2–3):173–179. https://doi.org/10.1016/j.susc.2004.07.00610.1016/j.susc.2004.07.006 ↗
7. Kim HB, Lee WJ, Choi SC, Lee KB, Lee M-H (2021) Preparation of PTFE-glass composite filter with low surface free energy by sandblasting. Surf Interf 26:101381. https://doi.org/10.1016/j.surfin.2021.10138110.1016/j.surfin.2021.101381 ↗
8. Sharma M, Gao S, Mäder E, Sharma H, Wei LY, Bijwe J (2014) Carbon fiber surfaces and composite interphases. Compos Sci Technol 102:35–50. https://doi.org/10.1016/j.compscitech.2014.07.00510.1016/j.compscitech.2014.07.005 ↗
9. Koutroumanis N, Manikas AC, Pappas PN, Petropoulos F, Sygellou L, Tasis D, Papagelis K, Anagnostopoulos G, Galiotis C (2018) A novel mild method for surface treatment of carbon fibres in epoxy-matrix composites. Compos Sci Technol 157:178–184. https://doi.org/10.1016/j.compscitech.2018.01.04810.1016/j.compscitech.2018.01.048 ↗
10. Delamar M, Désarmot G, Fagebaume O, Hitmi R, Pinsonc J, Savéant J-M (1997) Modification of carbon fiber surfaces by electrochemical reduction of aryl diazonium salts: application to carbon epoxy composites. Carbon 35(6):801–807. https://doi.org/10.1016/S0008-6223(97)00010-910.1016/S0008-6223(97)00010-9 ↗
11. Ma L, Meng L, Fan D, He J, Jiali Yu, Qi M, Chen Z, Huang Y (2014) Interfacial enhancement of carbon fiber composites by generation 1–3 dendritic hexamethylenetetramine functionalization. Appl Surf Sci 296:61–68. https://doi.org/10.1016/j.apsusc.2014.01.03910.1016/j.apsusc.2014.01.039 ↗
12. Fowkes FM, McCarthy DC, Mostafa MA (1980) Contact angles and the equilibrium spreading pressures of liquids on hydrophobic solids. Academic Press 78(1):200–206. https://doi.org/10.1016/0021-9797(80)90508-110.1016/0021-9797(80)90508-1 ↗
13. Lim SH, On SY, Kim H, Bang YH, Kim SS (2021) Resin impregnation and interfacial adhesion behaviors in carbon fiber/epoxy composites: effects of polymer slip and normalized surface free energy with respect to the sizing agents. Compos Part A Appl Sci Manuf 146:106424. https://doi.org/10.1016/j.compositesa.2021.10642410.1016/j.compositesa.2021.106424 ↗
14. Qiu Si, Wang J, Zhang D, Vuure AWV, Seveno D, Fuentes CA (2019) Wetting dynamics and surface energy components of single carbon fibers. J Colloid Interface Sci 557:349–356. https://doi.org/10.1016/j.jcis.2019.09.02610.1016/j.jcis.2019.09.026 ↗
15. Bensalem S, Hamdi B, Del Confetto S, Calvet R (2021) Characterization of surface properties of chitosan/bentonite composites beads by inverse gas chromatography. Int J Biol Macromol 166:1448–1459. https://doi.org/10.1016/j.ijbiomac.2020.11.02410.1016/j.ijbiomac.2020.11.024 ↗
16. Boudriche L, Calvet R, Chamayou A, Hamdi B (2021) Influence of different wet milling on the properties of an attapulgite clay, contribution of inverse gas chromatography. Powder Technol 378:29–39. https://doi.org/10.1016/j.powtec.2020.09.04510.1016/j.powtec.2020.09.045 ↗
17. Lindsay B, Abel M-L, Watts JF (2007) A study of electrochemically treated PAN based carbon fibres by IGC and XPS. Carbon 45(12):2433–2444. https://doi.org/10.1016/j.carbon.2007.04.01710.1016/j.carbon.2007.04.017 ↗
18. Allington RD, Hamerton I, Hay JN, Howlin BJ, Attwood D (2005) Inverse gas chromatography characterization of carbon fiber surfaces—effects of applied surface treatment. High Perf Polym 17(4):561–574. https://doi.org/10.1177/095400830505191910.1177/0954008305051919 ↗
19. Jager M, Zabihi O, Ahmadi M, Li QX, Depalmeanar A, Naebe M (2018) Nano-enhanced interface in carbon fibre polymer composite using halloysite nanotubes. Compos Part A-Appl Sci Manufact 109:115–123. https://doi.org/10.1016/j.compositesa.2018.03.01010.1016/j.compositesa.2018.03.010 ↗
20. Dai Z, Zhang B, Shi F, Li M, Zhang Z (2011) Yizhuo Gu (2011) Effect of heat treatment on carbon fiber surface properties and fibers/epoxy interfacial adhesion. Appl Surf Sci 257(20):8457–8461. https://doi.org/10.1016/j.apsusc.2011.04.12910.1016/j.apsusc.2011.04.129 ↗
21. Lavielle JS (1991) Surface properties of carbon fibers determined by inverse gas chromatography: role of pretreatment. Langmuir 7:978–981. https://doi.org/10.1021/la00053a02710.1021/la00053a027 ↗
22. van Oss CJ, Good RJ (1988) Orientation of the water molecules of hydration of human serum albumin. J Protein Chem 7(2):179–183. https://doi.org/10.1007/BF0102524810.1007/BF01025248 ↗
23. Tianshu Li 2021 Enhancement Effect of Carbon Nanotubes on Multi-level Interface of Carbon Fiber/Resin Composites. Beihang University.
24. Dai Z, Shi F, Zhang B, Li M, Zhang Z (2011) Effect of sizing on carbon fiber surface properties and fibers/epoxy interfacial adhesion. Appl Surf Sci 257(15):6980–6985. https://doi.org/10.1016/j.apsusc.2011.03.04710.1016/j.apsusc.2011.03.047 ↗
25. Dai Z, Zhang B, Shi F, Li M, Zhang Z, Yizhuo Gu (2011) Effect of heat treatment on carbon fiber surface properties and fibers/epoxy interfacial adhesion. Appl Surf Sci 257(20):8457–8461. https://doi.org/10.1016/j.apsusc.2011.04.12910.1016/j.apsusc.2011.04.129 ↗
26. Yao L, Li M, Qing Wu, Dai Z, Yizhuo Gu, Li Y, Zhang Z (2012) Comparison of sizing effect of T700 grade carbon fiber on interfacial properties of fiber/BMI and fiber/epoxy. Appl Surf Sci 263:326–333. https://doi.org/10.1016/j.apsusc.2012.09.05410.1016/j.apsusc.2012.09.054 ↗
27. Sharma SP, Lakkad SC (2009) Morphology study of carbon nanospecies grown on carbon fibers by thermal CVD technique. Surf Coat Tech 203(10–11):1329–1335. https://doi.org/10.1016/j.surfcoat.2008.10.04310.1016/j.surfcoat.2008.10.043 ↗