journal article·2021-12

Raw and pyrolyzed (with and without melamine) graphene nanoplatelets with different surface areas as PEM fuel cell catalyst supports

Ayşenur Öztürk, Ayşe Bayrakçeken Yurtcan

Carbon Letters· Volume 31· Issue 6
Publisher page

Abstract

Platinum (Pt) catalysts dispersed on carbon-based support materials are generally used in the polymer electrolyte membrane (PEM) fuel cells. In this study, commercial graphene nanoplatelets (GNPs), with different surface areas (320, 530, 800 m2 g−1), were used as catalyst supports in PEM fuel cells. These GNPs were also pyrolyzed under the inert atmosphere, with and without melamine, as the nitrogen (N) source. Various characterizations (Elemental analysis, FTIR, Raman spectroscopy, BET, TEM, HRTEM, SAED, XRD, TGA, ICP-MS, contact angle measurement, CV, ORR, chronoamperometry, EIS, PEM fuel cell performance test) were performed for the detailed analysis of Pt/GNPs. Based on the three-electrode cell system, the lowest electrochemical surface area (ECSA) loss (29.9%), Pt mass activity loss (20.3%) and overall (charge and mass) resistance (42.2 Ω) were obtained with the Pt/M-530 catalyst. According to the in-situ PEM fuel cell performance results, the specific peak power density was recorded as (450 mW mg Pt−1) for the Pt/R-530 catalyst, which has also the second most hydrophobic catalyst layer surface with the 146.5° ± 1.28° contact angle value. On the heels of Pt/R-530, the two best performances also belong to the Pt/M-530 (391 mW mg Pt−1) and Pt/P-530 (378 mW mg Pt−1) catalysts of the same group.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. Hussain MM, Baschuk JJ, Li X, Dincer I (2005) Thermodynamic analysis of a PEM fuel cell power system. Int J Therm Sci 44:903–911. https://doi.org/10.1016/j.ijthermalsci.2005.02.00910.1016/j.ijthermalsci.2005.02.009 ↗
2. Özgür T, Yakaryılmaz AC (2018) A review: exergy analysis of PEM and PEM fuel cell based CHP systems. Int J Hydrogen Energy 43:17993–18000. https://doi.org/10.1016/j.ijhydene.2018.01.10610.1016/j.ijhydene.2018.01.106 ↗
3. Ozden E, Tari I (2017) PEM fuel cell degradation effects on the performance of a stand-alone solar energy system. Int J Hydrogen Energy 42:13217–13225. https://doi.org/10.1016/j.ijhydene.2017.04.01710.1016/j.ijhydene.2017.04.017 ↗
4. Park S, Shao Y, Wan H, Rieke PC, Viswanathan VV, Towne SA, Saraf LV, Liu J, Lin Y, Wang Y (2011) Design of graphene sheets-supported Pt catalyst layer in PEM fuel cells. Electrochem Commun 13:258–261. https://doi.org/10.1016/j.elecom.2010.12.02810.1016/j.elecom.2010.12.028 ↗
5. Marinkas A, Arena F, Mitzel J, Prinz GM, Heinzel A, Peinecke V, Natter H (2013) Graphene as catalyst support: the influences of carbon additives and catalyst preparation methods on the performance of PEM fuel cells. Carbon 58:139–150. https://doi.org/10.1016/j.carbon.2013.02.04310.1016/j.carbon.2013.02.043 ↗
6. Yarar Kaplan B, Haghmoradi N, Biçer E, Merino C, Alkan Gürsel S (2018) High performance electrocatalysts supported on graphene based hybrids for polymer electrolyte membrane fuel cells. Int J Hydrogen Energy 43:23221–23230. https://doi.org/10.1016/j.ijhydene.2018.10.22210.1016/j.ijhydene.2018.10.222 ↗
7. Lei M, Liang C, Wang YJ, Huang K, Ye CX, Liu G, Wang WJ, Jin SF, Zhang R, Fan DY, Yang HJ, Wang YG (2013) Durable platinum/graphene catalysts assisted with polydiallyldimethylammonium for proton-exchange membrane fuel cells. Electrochim Acta 113:366–372. https://doi.org/10.1016/j.electacta.2013.09.11910.1016/j.electacta.2013.09.119 ↗
8. Öner E, Öztürk A, Bayrakçeken Yurtcan A (2020) Utilization of the graphene aerogel as PEM fuel cell catalyst support: effect of polypyrrole (PPy) and polydimethylsiloxane (PDMS) addition. Int J Hydrogen Energy 45:34818–34836. https://doi.org/10.1016/j.ijhydene.2020.05.05310.1016/j.ijhydene.2020.05.053 ↗
9. Çögenli MS, Bayrakçeken Yurtcan A (2018) Graphene aerogel supported platinum nanoparticles for formic acid electro-oxidation. Mater Res Express 5:075513. https://doi.org/10.1088/2053-1591/aad0e810.1088/2053-1591/aad0e8 ↗
10. Daş E, Alkan Gürsel S, Bayrakçeken Yurtcan A (2020) Pt-alloy decorated graphene as an efficient electrocatalyst for PEM fuel cell reactions. J Supercrit Fluids 165:104962. https://doi.org/10.1016/j.supflu.2020.10496210.1016/j.supflu.2020.104962 ↗
11. Daş E, Alkan Gürsel S, Işikel Şanli L, Bayrakçeken Yurtcan A (2016) Comparison of two different catalyst preparation methods for graphene nanoplatelets supported platinum catalysts. Int J Hydrogen Energy 41:9755–9761. https://doi.org/10.1016/j.ijhydene.2016.01.11110.1016/j.ijhydene.2016.01.111 ↗
12. Cho SH, Yang HN, Lee DC, Park SH, Kim WJ (2013) Electrochemical properties of Pt/graphene intercalated by carbon black and its application in polymer electrolyte membrane fuel cell. J Power Sources 225:200–206. https://doi.org/10.1016/j.jpowsour.2012.10.04010.1016/j.jpowsour.2012.10.040 ↗
13. Öztürk A, Özçelik N, Bayrakçeken Yurtcan A (2021) Platinum/graphene nanoplatelets/silicone rubber composites as polymer electrolyte membrane fuel cell catalysts. Mater Chem Phys 260:124110. https://doi.org/10.1016/j.matchemphys.2020.12411010.1016/j.matchemphys.2020.124110 ↗
14. Levy N, Lori O, Gonen S, Mizrahi M, Ruthstein S, Elbaz L (2020) The relationship of morphology and catalytic activity: a case study of iron corrole incorporated in high surface area carbon supports. Carbon 158:238–243. https://doi.org/10.1016/j.carbon.2019.12.01210.1016/j.carbon.2019.12.012 ↗
15. Öztürk A, Bayrakçeken Yurtcan A (2018) Synthesis of polypyrrole (PPy) based porous N-doped carbon nanotubes (N-CNTs) as catalyst support for PEM fuel cells. Int J Hydrogen Energy 43:18559–18571. https://doi.org/10.1016/j.ijhydene.2018.05.10610.1016/j.ijhydene.2018.05.106 ↗
16. Heydari A, Gharibi H (2016) Fabrication of electrocatalyst based on nitrogen doped graphene as highly efficient and durable support for using in polymer electrolyte fuel cell. J Power Sources 325:808–815. https://doi.org/10.1016/j.jpowsour.2016.06.03910.1016/j.jpowsour.2016.06.039 ↗
17. Geng D, Hu Y, Li Y, Li R, Sun X (2012) One-pot solvothermal synthesis of doped graphene with the designed nitrogen type used as a Pt support for fuel cells. Electrochem Commun 22:65–68. https://doi.org/10.1016/j.elecom.2012.05.03310.1016/j.elecom.2012.05.033 ↗
18. Ghanbarlou H, Rowshanzamir S, Parnian MJ, Mehri F (2016) Comparison of nitrogen-doped graphene and carbon nanotubes as supporting material for iron and cobalt nanoparticle electrocatalysts toward oxygen reduction reaction in alkaline media for fuel cell applications. Int J Hydrogen Energy 41:14665–14675. https://doi.org/10.1016/j.ijhydene.2016.06.00510.1016/j.ijhydene.2016.06.005 ↗
19. Li Y, Zhu X, Chen Y, Zhang S, Li J, Liu J (2020) Rapid synthesis of highly active Pt/C catalysts with various metal loadings from single batch platinum colloid. J Energy Chem 47:138–145. https://doi.org/10.1016/j.jechem.2019.12.00410.1016/j.jechem.2019.12.004 ↗
20. Martins M, Milikić J, Šljukić B, Soylu GSP, Bayrakçeken Yurtcan A, Bozkurt G, Santos DMF (2019) Mn2O3-MO (MO = ZrO2, V2O5, WO3) supported PtNi nanoparticles: designing stable and efficient electrocatalysts for oxygen reduction and borohydride oxidation. Microporous Mesoporous Mater 273:286–293. https://doi.org/10.1016/j.micromeso.2018.07.02210.1016/j.micromeso.2018.07.022 ↗
21. Maass S, Finsterwalder F, Frank G, Hartmann R, Merten C (2008) Carbon support oxidation in PEM fuel cell cathodes. J Power Sources 176:444–451. https://doi.org/10.1016/j.jpowsour.2007.08.05310.1016/j.jpowsour.2007.08.053 ↗
22. Sun Q, Kim S (2015) Synthesis of nitrogen-doped graphene supported Pt nanoparticles catalysts and their catalytic activity for fuel cells. Electrochim Acta 153:566–573. https://doi.org/10.1016/j.electacta.2014.11.07710.1016/j.electacta.2014.11.077 ↗
23. Sibul R, Kibena-Põldsepp E, Mäeorg U, Merisalu M, Kikas A, Kisand V, Treshchalov A, Sammelselg V, Tammeveski K (2019) Sulphur and nitrogen co-doped graphene-based electrocatalysts for oxygen reduction reaction in alkaline medium. Electrochem Commun 109:106603. https://doi.org/10.1016/j.elecom.2019.10660310.1016/j.elecom.2019.106603 ↗
24. Khasim S (2019) Polyaniline–graphene nanoplatelet composite films with improved conductivity for high performance X-band microwave shielding applications. Results Phys 12:1073–1081. https://doi.org/10.1016/j.rinp.2018.12.08710.1016/j.rinp.2018.12.087 ↗
25. Romero A, Lavín-López MP, de la Osa AR, Ordoñez S, de Lucas-Consuegra A, Valverde JL, Patón A (2020) Different strategies to simultaneously N-doping and reduce graphene oxide for electrocatalytic applications. J Electroanal Chem 857:113695. https://doi.org/10.1016/j.jelechem.2019.11369510.1016/j.jelechem.2019.113695 ↗
26. Ma R, Zhou Y, Li P, Chen Y, Wang J, Liu Q (2016) Self-assembly of nitrogen-doped graphene-wrapped carbon nanoparticles as an efficient electrocatalyst for oxygen reduction reaction. Electrochim Acta 216:347–354. https://doi.org/10.1016/j.electacta.2016.09.02710.1016/j.electacta.2016.09.027 ↗
27. Lee MS, Choi HJ, Baek JB, Chang DW (2017) Simple solution-based synthesis of pyridinic-rich nitrogen-doped graphene nanoplatelets for supercapacitors. Appl Energy 195:1071–1078. https://doi.org/10.1016/j.apenergy.2016.07.10710.1016/j.apenergy.2016.07.107 ↗
28. Karuppanan KK, Raghu AV, Panthalingal MK, Thiruvenkatam V, Karthikeyan P, Pullithadathil B (2019) 3D-porous electrocatalytic foam based on Pt@N-doped graphene for high performance and durable polymer electrolyte membrane fuel cells. Sustain Energy Fuels 3:996–1011. https://doi.org/10.1039/C8SE00552D10.1039/C8SE00552D ↗
29. Mirshekari GR, Rice CA (2018) Effects of support particle size and Pt content on catalytic activity and durability of Pt/TiO2 catalyst for oxygen reduction reaction in proton exchange membrane fuel cells environment. J Power Sources 396:606–614. https://doi.org/10.1016/j.jpowsour.2018.06.06110.1016/j.jpowsour.2018.06.061 ↗
30. Karaman C, Bayram E, Karaman O, Aktaş Z (2020) Preparation of high surface area nitrogen doped graphene for the assessment of morphologic properties and nitrogen content impacts on supercapacitors. J Electroanal Chem 868:114197. https://doi.org/10.1016/j.jelechem.2020.11419710.1016/j.jelechem.2020.114197 ↗
31. Çelik MK, Öztürk A, Çögenli MS, Bayrakçeken Yurtcan A (2020) Evaluation of low and high surface area TiO(2) and Al(2)O(3) metal oxides-carbon hybrids in terms of polymer electrolyte membrane fuel cell catalyst support. J Nanosci Nanotechnol 20:1189–1208. https://doi.org/10.1166/jnn.2020.1696210.1166/jnn.2020.16962 ↗
32. Yurdakal S, Garlisi C, Özcan L, Bellardita M, Palmisano G (2019) (Photo)catalyst characterization techniques: adsorption isotherms and BET, SEM, FTIR, UV–Vis, photoluminescence, and electrochemical characterizations. In: Marcì G, Palmisano L (eds) Heterogeneous photocatalysis: relationships with heterogeneous catalysis and perspectives, 1st edn. Elsevier, New York, pp 87–15210.1016/B978-0-444-64015-4.00004-3 ↗
33. Singh A, Roberts AJ, Slade RCT, Chandra A (2014) High electrochemical performance in asymmetric supercapacitors using MWCNT/nickel sulfide composite and graphene nanoplatelets as electrodes. J Mater Chem A 2:16723–16730. https://doi.org/10.1039/C4TA02870H10.1039/C4TA02870H ↗
34. Ding JH, Zhao HR, Yu HB (2018) A water-based green approach to large-scale production of aqueous compatible graphene nanoplatelets. Sci Rep 8:5567. https://doi.org/10.1038/s41598-018-23859-510.1038/s41598-018-23859-5 ↗
35. Alawi OA, Sidik NAC, Kazi SN, Najafi G (2018) Graphene nanoplatelets and few-layer graphene studies in thermo-physical properties and particle characterization. J Therm Anal Calorim 135:1081–1093. https://doi.org/10.1007/s10973-018-7585-010.1007/s10973-018-7585-0 ↗
36. Lin Z, Waller G, Liu Y, Liu M, Wong CP (2012) Facile synthesis of nitrogen-doped graphene via pyrolysis of graphene oxide and urea, and its electrocatalytic activity toward the oxygen-reduction reaction. Adv Energy Mater 2:884–888. https://doi.org/10.1002/aenm.20120003810.1002/aenm.201200038 ↗
37. Antolini E (2009) Carbon supports for low-temperature fuel cell catalysts. Appl Catal B Environ 88:1–24. https://doi.org/10.1016/j.apcatb.2008.09.03010.1016/j.apcatb.2008.09.030 ↗
38. Jeon IY, Kweon DH, Kim SW, Shin SH, Im YK, Yu SY, Ju MJ, Baek JB (2017) Enhanced electrocatalytic performance of Pt nanoparticles on triazine-functionalized graphene nanoplatelets for both oxygen and iodine reduction reactions. J Mater Chem A 5:21936–21946. https://doi.org/10.1039/C7TA06912J10.1039/C7TA06912J ↗
39. Wu R, Tsiakaras P, Shen PK (2019) Facile synthesis of bimetallic Pt–Pd symmetry-broken concave nanocubes and their enhanced activity toward oxygen reduction reaction. Appl Catal B Environ 251:49–56. https://doi.org/10.1016/j.apcatb.2019.03.04510.1016/j.apcatb.2019.03.045 ↗
40. Bhattacharya S, Singh SR, Nayar S (2014) Graphene synthesis and functionalization with collagen into an aqueous dispersion showing high photo-luminescence. J Nanofluids 3:8–16. https://doi.org/10.1166/jon.2014.107910.1166/jon.2014.1079 ↗
41. Jeon IY, Choi HJ, Jung SM, Seo JM, Kim MJ, Dai L, Baek JB (2013) Large-scale production of edge-selectively functionalized graphene nanoplatelets via ball milling and their use as metal-free electrocatalysts for oxygen reduction reaction. J Am Chem Soc 135:1386–1393. https://doi.org/10.1021/ja309164310.1021/ja3091643 ↗
42. Verma M, Chauhan SS, Dhawan SK, Choudhary V (2017) Graphene nanoplatelets/carbon nanotubes/polyurethane composites as efficient shield against electromagnetic polluting radiations. Compos Part B Eng 120:118–127. https://doi.org/10.1016/j.compositesb.2017.03.06810.1016/j.compositesb.2017.03.068 ↗
43. Shao Y, Zhang S, Wang C, Nie Z, Liu J, Wang Y, Lin Y (2010) Highly durable graphene nanoplatelets supported Pt nanocatalysts for oxygen reduction. J Power Sources 195:4600–4605. https://doi.org/10.1016/j.jpowsour.2010.02.04410.1016/j.jpowsour.2010.02.044 ↗
44. Argüello JA, Rojo JM, Moreno R (2019) Electrophoretic deposition of manganese oxide and graphene nanoplatelets on graphite paper for the manufacture of supercapacitor electrodes. Electrochim Acta 294:102–109. https://doi.org/10.1016/j.electacta.2018.10.09110.1016/j.electacta.2018.10.091 ↗
45. Bozkurt G, Memioğlu F, Bayrakçeken Yurtcan A (2016) Durability of carbon/conducting polymer composite supported Pt catalysts prepared by supercritical carbon dioxide deposition. Turk J Chem 40:117–124. https://doi.org/10.3906/kim-1502-9510.3906/kim-1502-95 ↗
46. Kim J, Kim C, Jeon IY, Baek JB, Ju YW, Kim G (2018) A new strategy for outstanding performance and durability in acidic fuel cells: a small amount Pt anchored on Fe, N co-doped graphene Nanoplatelets. ChemElectroChem 5:2857–2862. https://doi.org/10.1002/celc.20180067410.1002/celc.201800674 ↗
47. Alanyalıoğlu M, Segura JJ, Oró-Solè J, Casañ-Pastor N (2012) The synthesis of graphene sheets with controlled thickness and order using surfactant-assisted electrochemical processes. Carbon 50:142–152. https://doi.org/10.1016/j.carbon.2011.07.06410.1016/j.carbon.2011.07.064 ↗
48. Wan H, Hu X (2019) Nitrogen/sulfur co-doped disordered porous biocarbon as high performance anode materials of lithium/sodium ion batteries. Int J Hydrogen Energy 44:22250–22262. https://doi.org/10.1016/j.ijhydene.2019.06.10710.1016/j.ijhydene.2019.06.107 ↗
49. Sharma R, Chadha N, Saini P (2017) Determination of defect density, crystallite size and number of graphene layers in graphene analogues using X-ray diffraction and Raman spectroscopy. Indian J Pure Appl Phys 55:625–629 (Corpus ID: 55290337)
50. Wang G, Yang J, Park J, Gou X, Wang B, Liu H, Yao J (2008) Facile synthesis and characterization of graphene nanosheets. J Phys Chem C 112:8192–8195. https://doi.org/10.1021/jp710931h10.1021/jp710931h ↗
51. Shtein M, Pri-Bar I, Varenik M, Regev O (2015) Characterization of graphene-nanoplatelets structure via thermogravimetry. Anal Chem 87:4076–4080. https://doi.org/10.1021/acs.analchem.5b0022810.1021/acs.analchem.5b00228 ↗
52. Daş E, Alkan Gürsel S, Işıkel Şanlı L, Bayrakçeken Yurtcan A (2017) Thermodynamically controlled Pt deposition over graphene nanoplatelets: effect of Pt loading on PEM fuel cell performance. Int J Hydrogen Energy 42:19246–19256. https://doi.org/10.1016/j.ijhydene.2017.06.10810.1016/j.ijhydene.2017.06.108 ↗
53. Öztürk A, Bayrakçeken Yurtcan A (2017) Effect of calcination temperature on hydrophobicity of microporous layers prepared with two different molecular weights of PDMS polymer on PEM fuel cell performance with low Pt loading. Int J Hydrogen Energy 42:6250–6261. https://doi.org/10.1016/j.ijhydene.2016.11.04110.1016/j.ijhydene.2016.11.041 ↗
54. Öztürk A, Bayrakçeken Yurtcan A (2020) Investigation of synergetic effect of PDMS polymer hydrophobicity and polystyrene-silica particles roughness in the content of microporous layer on water management in PEM fuel cell. Appl Surf Sci 511:145415. https://doi.org/10.1016/j.apsusc.2020.14541510.1016/j.apsusc.2020.145415 ↗
55. Ungan H, Bayrakçeken Yurtcan A (2020) Water management improvement in PEM fuel cells via addition of PDMS or APTES polymers to the catalyst layer. Turk J Chem 44:1227–1243. https://doi.org/10.3906/kim-2002-4910.3906/kim-2002-49 ↗
56. Daş E, Kaplan BY, Alkan Gürsel S, Bayrakçeken Yurtcan A (2019) Graphene nanoplatelets-carbon black hybrids as an efficient catalyst support for Pt nanoparticles for polymer electrolyte membrane fuel cells. Renew Energy 139:1099–1110. https://doi.org/10.1016/j.renene.2019.02.13710.1016/j.renene.2019.02.137 ↗
57. Prolongo SG, Moriche R, Jiménez-Suárez A, Sánchez M, Ureña A (2014) Advantages and disadvantages of the addition of graphene nanoplatelets to epoxy resins. Eur Polym J 61:206–214. https://doi.org/10.1016/j.eurpolymj.2014.09.02210.1016/j.eurpolymj.2014.09.022 ↗
58. Güvenatam B, Fıçıcılar B, Bayrakçeken A, Eroğlu İ (2012) Hollow core mesoporous shell carbon supported Pt electrocatalysts with high Pt loading for PEMFCs. Int J Hydrogen Energy 37:1865–1874. https://doi.org/10.1016/j.ijhydene.2011.06.12910.1016/j.ijhydene.2011.06.129 ↗
59. Daş E, Bayrakçeken Yurtcan A (2016) Effect of carbon ratio in the polypyrrole/carbon composite catalyst support on PEM fuel cell performance. Int J Hydrogen Energy 41:13171–13179. https://doi.org/10.1016/j.ijhydene.2016.05.16710.1016/j.ijhydene.2016.05.167 ↗
60. Shinozaki K, Zack JW, Richards RM, Pivovar BS, Kocha SS (2015) Oxygen reduction reaction measurements on platinum electrocatalysts utilizing rotating disk electrode technique. J Electrochem Soc 162:F1144–F1158. https://doi.org/10.1149/2.1071509jes10.1149/2.1071509jes ↗
61. Boxall C (1999) Kinetic modeling of electron transfer processes in colloidal semiconductor photocatalysis. In: Compton RG, Hancock G (eds) Applications of kinetic modelling, 1st edn. Elsevier, New York, pp 281–36810.1016/S0069-8040(99)80014-4 ↗
62. Xin Y, Liu JG, Zhou Y, Liu W, Gao J, Xie Y, Yin Y, Zou Z (2011) Preparation and characterization of Pt supported on graphene with enhanced electrocatalytic activity in fuel cell. J Power Sources 196:1012–1018. https://doi.org/10.1016/j.jpowsour.2010.08.05110.1016/j.jpowsour.2010.08.051 ↗
63. Jiang R, Tran DT, McClure J, Chu D (2012) Heat-treated hemin supported on graphene nanoplatelets for the oxygen reduction reaction. Electrochem Commun 19:73–76. https://doi.org/10.1016/j.elecom.2012.03.01310.1016/j.elecom.2012.03.013 ↗
64. Garsany Y, Baturina OA, Swider-Lyons KE, Kocha SS (2010) Experimental methods for quantifying the activity of platinum electrocatalysts for the oxygen reduction reaction. Anal Chem 82:6321–6328. https://doi.org/10.1021/ac100306c10.1021/ac100306c ↗
65. Tang Z, Huang QA, Wang YJ, Zhang F, Li W, Li A, Zhang L, Zhang J (2020) Recent progress in the use of electrochemical impedance spectroscopy for the measurement, monitoring, diagnosis and optimization of proton exchange membrane fuel cell performance. J Power Sources 468:228361. https://doi.org/10.1016/j.jpowsour.2020.22836110.1016/j.jpowsour.2020.228361 ↗
66. Mamlouk M, Scott K (2011) Analysis of high temperature polymer electrolyte membrane fuel cell electrodes using electrochemical impedance spectroscopy. Electrochim Acta 56:5493–5512. https://doi.org/10.1016/j.electacta.2011.03.05610.1016/j.electacta.2011.03.056 ↗
67. Virkar AV, Chen J, Tanner CW, Kim JW (2000) The role of electrode microstructure on activation and concentration polarizations in solid oxide fuel cells. Solid State Ion 131:189–198. https://doi.org/10.1016/S0167-2738(00)00633-010.1016/S0167-2738(00)00633-0 ↗
68. Arici E, Yarar Kaplan B, Mert AM, Alkan Gursel S, Kinayyigit S (2019) An effective electrocatalyst based on platinum nanoparticles supported with graphene nanoplatelets and carbon black hybrid for PEM fuel cells. Int J Hydrogen Energy 44:14175–14183. https://doi.org/10.1016/j.ijhydene.2018.11.21010.1016/j.ijhydene.2018.11.210 ↗
69. Işıkel Şanlı L, Bayram V, Yarar B, Ghobadi S, Alkan Gürsel S (2016) Development of graphene supported platinum nanoparticles for polymer electrolyte membrane fuel cells: Effect of support type and impregnation–reduction methods. Int J Hydrogen Energy 41:3414–3427. https://doi.org/10.1016/j.ijhydene.2015.12.16610.1016/j.ijhydene.2015.12.166 ↗
70. Hsieh SH, Hsu MC, Liu WL, Chen WJ (2013) Study of Pt catalyst on graphene and its application to fuel cell. Appl Surf Sci 277:223–230. https://doi.org/10.1016/j.apsusc.2013.04.02910.1016/j.apsusc.2013.04.029 ↗
71. Bharti A, Cheruvally G (2017) Influence of various carbon nano-forms as supports for Pt catalyst on proton exchange membrane fuel cell performance. J Power Sources 360:196–205. https://doi.org/10.1016/j.jpowsour.2017.05.11710.1016/j.jpowsour.2017.05.117 ↗