journal article·2021-08

Camphor leaf-derived activated carbon prepared by conventional physical activation and its water adsorption profile

Chairunnisa, N. Takata, K. Thu, T. Miyazaki, K. Nakabayashi, J. Miyawaki

Carbon Letters· Volume 31· Issue 4
Publisher page

Abstract

Preparation of activated carbon from biomass residue with conventional steam activation was conducted to find the alternative raw materials for meeting the high demand for low-cost porous material in the desiccant application. In this study, activated carbons were produced from dead camphor leaves using two-step methods at different preparation temperatures. The characterization results revealed that the prepared activated carbons have a surface area of 700 m2/g, with 75% of microporosity. The water vapor sorption study reported that the water uptake of camphor leaf-based activated carbons was strongly affected by the pore properties of the materials. Moreover, from the water adsorption kinetics, it was observed that the rate constant of adsorption was varied at each relative pressure, which can be assumed that the water adsorption mechanism is different at each relative pressure. From these results, it was revealed that the prepared camphor leaf-based activated carbons have a promising ability to adsorb water vapor from humid air.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Adsorption and biosorption for pollutant removal · Mesoporous Materials and Catalysis · Nanomaterials for catalytic reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Ge TS, Qi D, Dai YJ, Wang RZ (2018) Experimental testing on contaminant and moisture removal performance of silica gel desiccant wheel. Energy Build 176:71–77. https://doi.org/10.1016/j.enbuild.2018.07.03310.1016/j.enbuild.2018.07.033 ↗
2. Shigeishi RA, Langford CH, Hollebone BR (1979) Solar energy storage using chemical potential changes associated with drying of zeolites. Sol Energy 23:489–495. https://doi.org/10.1016/0038-092X(79)90072-010.1016/0038-092X(79)90072-0 ↗
3. Karmakar A, Prabakaran V, Zhao D, Chua KJ (2020) A review of metal-organic frameworks (MOFs) as energy-efficient desiccants for adsorption driven heat-transformation applications. Appl Energy 269:115070. https://doi.org/10.1016/j.apenergy.2020.11507010.1016/j.apenergy.2020.115070 ↗
4. Sultan M, Miyazaki T, Koyama S (2018) Optimization of adsorption isotherm types for desiccant air-conditioning applications. Renew Energy 121:441–450. https://doi.org/10.1016/j.renene.2018.01.04510.1016/j.renene.2018.01.045 ↗
5. Dural MU, Cavas L, Papageorgiou SK, Katsaros FK (2011) Methylene blue adsorption on activated carbon prepared from Posidonia oceanica (L.) dead leaves: kinetics and equilibrium studies. Chem Eng J 168:77–85. https://doi.org/10.1016/j.cej.2010.12.03810.1016/j.cej.2010.12.038 ↗
6. Mohamad Nor N, Lau LC, Lee KT, Mohamed AR (2013) Synthesis of activated carbon from lignocellulosic biomass and its applications in air pollution control—a review. J Environ Chem Eng 1:658–666. https://doi.org/10.1016/j.jece.2013.09.01710.1016/j.jece.2013.09.017 ↗
7. Miriyala N, Ouyang D, Perrie Y, Lowry D, Kirby DJ (2017) Activated carbon as a carrier for amorphous drug delivery: effect of drug characteristics and carrier wettability. Eur J Pharm Biopharm 115:197–205. https://doi.org/10.1016/j.ejpb.2017.03.00210.1016/j.ejpb.2017.03.002 ↗
8. Ioannidou O, Zabaniotou A (2007) Agricultural residues as precursors for activated carbon production—a review. Renew Sustain Energy Rev 11:1966–2005. https://doi.org/10.1016/j.rser.2006.03.01310.1016/j.rser.2006.03.013 ↗
9. Brito GM, Cipriano DF, Schettino MÂ, Cunha AG, Coelho ERC, Checon Freitas JC (2019) One-step methodology for preparing physically activated biocarbons from agricultural biomass waste. J Environ Chem Eng 7:103113. https://doi.org/10.1016/j.jece.2019.10311310.1016/j.jece.2019.103113 ↗
10. Zheng Y, Li Q, Yuan C, Tao Q, Zhao Y, Zhang G et al (2019) Influence of temperature on adsorption selectivity: coal-based activated carbon for CH4 enrichment from coal mine methane. Powder Technol 347:42–49. https://doi.org/10.1016/j.powtec.2019.02.04210.1016/j.powtec.2019.02.042 ↗
11. Yuan D, Zheng Y, Li Q, Lin B, Zhang G, Liu J (2018) Effects of pore structure of prepared coal-based activated carbons on CH4 enrichment from low concentration gas by IAST method. Powder Technol 333:377–384. https://doi.org/10.1016/j.powtec.2018.04.04510.1016/j.powtec.2018.04.045 ↗
12. Mamaní A, Sardella MF, Giménez M, Deiana C (2019) Highly microporous carbons from olive tree pruning: optimization of chemical activation conditions. J Environ Chem Eng 7:102830. https://doi.org/10.1016/j.jece.2018.10283010.1016/j.jece.2018.102830 ↗
13. Negara DNKP, Nindhia TGT, Surata IW, Hidajat F, Sucipta M (2019) Nanopore structures, surface morphology, and adsorption capacity of tabah bamboo-activated carbons. Surfaces Interfaces 16:22–28. https://doi.org/10.1016/j.surfin.2019.04.00210.1016/j.surfin.2019.04.002 ↗
14. Mohammed AA, Chen C, Zhu Z (2019) Low-cost, high-performance supercapacitor based on activated carbon electrode materials derived from baobab fruit shells. J Colloid Interface Sci 538:308–319. https://doi.org/10.1016/j.jcis.2018.11.10310.1016/j.jcis.2018.11.103 ↗
15. Khan EA, Shahjahan, Khan TA (2018) Adsorption of methyl red on activated carbon derived from custard apple (Annona squamosa) fruit shell: equilibrium isotherm and kinetic studies. J Mol Liq 249:1195–1211. https://doi.org/10.1016/j.molliq.2017.11.12510.1016/j.molliq.2017.11.125 ↗
16. Mahmood T, Ali R, Naeem A, Hamayun M, Aslam M (2017) Potential of used Camellia sinensis leaves as precursor for activated carbon preparation by chemical activation with H3PO4; optimization using response surface methodology. Process Saf Environ Prot 109:548–563. https://doi.org/10.1016/j.psep.2017.04.02410.1016/j.psep.2017.04.024 ↗
17. Ao W, Fu J, Mao X, Kang Q, Ran C, Liu Y et al (2018) Microwave assisted preparation of activated carbon from biomass: a review. Renew Sustain Energy Rev 92:958–979. https://doi.org/10.1016/j.rser.2018.04.05110.1016/j.rser.2018.04.051 ↗
18. González JF, Román S, González-García CM, Valente Nabais JM, Ortiz AL (2009) Porosity development in activated carbons prepared from walnut shells by carbon dioxide or steam activation. Ind Eng Chem Res 48:9354–9354. https://doi.org/10.1021/ie901329310.1021/ie9013293 ↗
19. Lee JH, Heo YJ, Park SJ (2018) Effect of silica removal and steam activation on extra-porous activated carbons from rice husks for methane storage. Int J Hydrogen Energy 43:22377–22384. https://doi.org/10.1016/j.ijhydene.2018.10.03910.1016/j.ijhydene.2018.10.039 ↗
20. Lv S, Li C, Mi J, Meng H (2020) A functional activated carbon for efficient adsorption of phenol derived from pyrolysis of rice husk, KOH-activation and EDTA-4Na-modification. Appl Surf Sci 510:145425. https://doi.org/10.1016/j.apsusc.2020.14542510.1016/j.apsusc.2020.145425 ↗
21. Guangzhi Y, Jinyu Y, Yuhua Y, Zhihong T, DengGuang Y, Junhe Y (2017) Preparation and CO2 adsorption properties of porous carbon from camphor leaves by hydrothermal carbonization and sequential potassium hydroxide activation. RSC Adv 7:4152–4160. https://doi.org/10.1039/C6RA25303B10.1039/C6RA25303B ↗
22. Zhu X, Yu S, Xu K, Zhang Y, Zhang L, Lou G et al (2018) Sustainable activated carbons from dead ginkgo leaves for supercapacitor electrode active materials. Chem Eng Sci 181:36–45. https://doi.org/10.1016/j.ces.2018.02.00410.1016/j.ces.2018.02.004 ↗
23. Chang CF, Chang CY, Tsai WT (2000) Effects of burn-off and activation temperature on preparation of activated carbon from corn cob agrowaste by CO2 and steam. J Colloid Interface Sci 232:45–49. https://doi.org/10.1006/jcis.2000.717110.1006/jcis.2000.7171 ↗
24. Kim DW, Kil HS, Nakabayashi K, Yoon SH, Miyawaki J (2017) Structural elucidation of physical and chemical activation mechanisms based on the microdomain structure model. Carbon NY 114:98–105. https://doi.org/10.1016/j.carbon.2016.11.08210.1016/j.carbon.2016.11.082 ↗
25. Plaza MG, González AS, Pis JJ, Rubiera F, Pevida C (2014) Production of microporous biochars by single-step oxidation: effect of activation conditions on CO2 capture. Appl Energy 114:551–562. https://doi.org/10.1016/j.apenergy.2013.09.05810.1016/j.apenergy.2013.09.058 ↗
26. Heo YJ, Park SJ (2015) A role of steam activation on CO2 capture and separation of narrow microporous carbons produced from cellulose fibers. Energy 91:142–150. https://doi.org/10.1016/j.energy.2015.08.03310.1016/j.energy.2015.08.033 ↗
27. Selvaraju G, Bakar NKA (2018) Process conditions for the manufacture of highly micro-mesoporous eco-friendly activated carbon from artocarpus integer bio-waste by steam activation. J Taiwan Inst Chem Eng 93:414–426. https://doi.org/10.1016/j.jtice.2018.08.01110.1016/j.jtice.2018.08.011 ↗
28. Kumar M, Sabbarwal S, Mishra PK, Upadhyay SN (2019) Thermal degradation kinetics of sugarcane leaves (Saccharum officinarum L) using thermo-gravimetric and differential scanning calorimetric studies. Bioresour Technol 279:262–270. https://doi.org/10.1016/j.biortech.2019.01.13710.1016/j.biortech.2019.01.137 ↗
29. Danish M, Ahmad T, Hashim R, Said N, Akhtar MN, Mohamad-Saleh J et al (2018) Comparison of surface properties of wood biomass activated carbons and their application against rhodamine B and methylene blue dye. Surfaces Interfaces 11:1–13. https://doi.org/10.1016/j.surfin.2018.02.00110.1016/j.surfin.2018.02.001 ↗
30. Li W, Yang K, Peng J, Zhang L, Guo S, Xia H (2008) Effects of carbonization temperatures on characteristics of porosity in coconut shell chars and activated carbons derived from carbonized coconut shell chars. Ind Crops Prod 8:190–198. https://doi.org/10.1016/j.indcrop.2008.02.01210.1016/j.indcrop.2008.02.012 ↗
31. Rodriguez-Reinoso F (1991) Controlled gasification of carbon and pore structure development. NATO ASI Ser Series E Appl Sci 192:533–571. https://doi.org/10.1007/978-94-011-3310-4_2610.1007/978-94-011-3310-4_26 ↗
32. Stafford K, Sing W, Rouquerol J (2016) Reporting physisorption data for gas/solid systems including catalysis * reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity. Pure Appl Chem 57:603–619
33. Mohd W, Wan A, Shabuddin W, Ali W, Sulaiman MZ (2000) The effects of carbonization temperature on pore development in palm-shell-based activated carbon. Carbon 0008:1925–1932
34. Coates J Interpretation of infrared spectra, a practical approach n.d.:1–23
35. Biniak S, Szymański G, Siedlewski J, Światkoski A (1997) The characterization of activated carbons with oxygen and nitrogen surface groups. Carbon NY 35:1799–1810. https://doi.org/10.1016/S0008-6223(97)00096-110.1016/S0008-6223(97)00096-1 ↗
36. Guo J, Lua AC (2003) Surface functional groups on oil-palm-shell adsorbents prepared by H3PO4 and KOH activation and their effects on adsorptive capacity. Chem Eng Res Des 81:585–590. https://doi.org/10.1205/02638760376544453710.1205/026387603765444537 ↗
37. Yang J, Qiu KQ (2009) Preparation of activated carbon by chemical activation under vacuum. Environ Sci Technol 43:3385–3390. https://doi.org/10.1021/es803611510.1021/es8036115 ↗
38. Bouchelta C, Medjram MS, Bertrand O, Bellat JP (2008) Preparation and characterization of activated carbon from date stones by physical activation with steam. J Anal Appl Pyrolysis 82:70–77. https://doi.org/10.1016/j.jaap.2007.12.00910.1016/j.jaap.2007.12.009 ↗
39. Horikawa T, Sekida T, Hayashi J, Katoh M, Do DD (2011) A new adsorption-desorption model for water adsorption in porous carbons. Carbon NY 49:416–424. https://doi.org/10.1016/j.carbon.2010.09.03810.1016/j.carbon.2010.09.038 ↗
40. Alcañiz-Monge J, Linares-Solano A, Rand B (2002) Mechanism of adsorption of water in carbon micropores as revealed by a study of activated carbon fibers. J Phys Chem B 106:3209–3216. https://doi.org/10.1021/jp014388b10.1021/jp014388b ↗
41. Liu L, Zeng Y, Johnathan S, Xu H, Do DD, Nicholson D (2019) On the mechanism of water adsorption in carbon micropores—a molecular simulation study. Chem Eng J 357:358–366. https://doi.org/10.1016/j.cej.2018.09.16010.1016/j.cej.2018.09.160 ↗
42. Yao X, Li L, Li H, He S, Liu Z, Ma W (2014) A new model for calculating the adsorption equilibrium constant of water vapor in micropores of activated carbon. Comput Mater Sci 89:137–141. https://doi.org/10.1016/j.commatsci.2014.03.03710.1016/j.commatsci.2014.03.037 ↗
43. Liu L, Tan S, Horikawa T, Do DD, Nicholson D, Liu J (2017) Water adsorption on carbon—a review. Adv Colloid Interface Sci 250:64–78. https://doi.org/10.1016/j.cis.2017.10.00210.1016/j.cis.2017.10.002 ↗
44. McCallum CL, Bandosz TJ, McGrother SC, Muller EA, Gubbins KE (1999) Molecular model for adsorption of water on activated carbon: comparison of simulation and experiment. Langmuir 15:533–544. https://doi.org/10.1021/la980595010.1021/la9805950 ↗
45. Zheng X, Ge TS, Wang RZ (2014) Recent progress on desiccant materials for solid desiccant cooling systems. Energy 74:280–294. https://doi.org/10.1016/j.energy.2014.07.02710.1016/j.energy.2014.07.027 ↗
46. Fujiki J, Yogo K (2019) Water adsorption on nitrogen-doped carbons for adsorption heat pump/desiccant cooling: experimental and density functional theory calculation studies. Appl Surf Sci 492:776–784. https://doi.org/10.1016/j.apsusc.2019.06.26710.1016/j.apsusc.2019.06.267 ↗
47. Horikawa T, Kitakaze Y, Sekida T, Hayashi J, Katoh M (2010) Characteristics and humidity control capacity of activated carbon from bamboo. Bioresour Technol 101:3964–3969. https://doi.org/10.1016/j.biortech.2010.01.03210.1016/j.biortech.2010.01.032 ↗
48. Zhao H, Yu Q, Li M, Sun S (2020) Preparation and water vapor adsorption of “green” walnut-shell activated carbon by CO2 physical activation. Adsorpt Sci Technol 38:60–76. https://doi.org/10.1177/026361741990084910.1177/0263617419900849 ↗