Investigation and analysis of surface roughness in machining carbon fiber reinforced polymer composites using artificial intelligence techniques
Source abstract
Abstract
Carbon fiber and its composites are increasingly used in many fields including defence, military, and allied industries. Also, surface quality is given due importance, as mating parts are used in machineries for their functioning. In this work, the turning process is considered for Carbon Fiber Reinforced Polymer (CFRP) composites by varying three important cutting variables: cutting speed, feed, and depth of cut. Correspondingly, the surface roughness is measured after the completion of turning operation. As well, a prediction model is created using different fuzzy logic membership function and Levenberg–Marquardt algorithm (LMA) in artificial intelligence. Later, the surface roughness values from the developed models are compared against the experimental values for its correlation and effectiveness in using different membership functions of fuzzy logic and ANN. Thus, the experimental results are analyzed using the effect graphs and it is presented in detail.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced machining processes and optimization · Tribology and Wear Analysis · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Li L, Sun L, Dai Z, Xiong Z, Huang B, Zhang Y (2019) Experimental investigation on mechanical properties and failure mechanisms of polymer composite-metal hybrid materials processed by direct injection-molding adhesion method. J Mater Process Tech 263:385–39510.1016/j.jmatprotec.2018.08.039 ↗
2. Singh AP, Sharma M, Singh I (2013) A review of modeling and control during drilling of fiber reinforced plastic composites. Composites B 47:118–12510.1016/j.compositesb.2012.10.038 ↗
3. Cenna AA, Mathew P (2002) Analysis and prediction of laser cutting parameters of fiber reinforced plastics (FRP) composite materials. Int J Mach Tools Manuf 42:105–11310.1016/S0890-6955(01)00090-6 ↗
4. Krishnamoorthy A, Rajendra Boopathy S, Palanikumar K, Paulo Davim J (2012) Application of grey fuzzy logic for the optimization of drilling parameters for CFRP composites with multiple performance characteristics. Measurement 45:1286–129610.1016/j.measurement.2012.01.008 ↗
5. Wang Y, Thomas Hahn H (2007) AFM characterization of the interfacial properties of carbon fiber reinforced polymer composites subjected to hygro thermal treatments. Compos Sci Technol 67:92–10110.1016/j.compscitech.2006.03.030 ↗
6. MeltemAltinKarataş HG (2018) A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials. Defence Technol 14:318–32610.1016/j.dt.2018.02.001 ↗
7. Denis CD, R, Troulis M, Partridge I.K., (2006) Delamination of Z-pinned carbon fiber reinforced laminates. Compos Sci Technol 66:855–86110.1016/j.compscitech.2004.12.018 ↗
8. Santiuste C, Soldani X, Muguelez MH (2010) Machining FEM model of long fiber composites for aeronautical components. Compos Struct 92:691–69810.1016/j.compstruct.2009.09.021 ↗
9. Wan Aizan Wan Abdul Rahman (2008) Lee Tin Sin, Abdul Razak Rahmat, Injection moulding simulation analysis of natural fiber composite window frame. J Mater Process Technol 197:22–3010.1016/j.jmatprotec.2007.06.014 ↗
10. Hu NS, Zhang LC (2004) Some observations in grinding unidirectional carbon fiber-reinforced plastics. J Mater Process Technol 152:333–33810.1016/j.jmatprotec.2004.04.374 ↗
11. Rusinek R (2010) Cutting process of composite materials: an experimental study. Int J Non-Linear Mech 45:458–46210.1016/j.ijnonlinmec.2010.01.004 ↗
12. Palanikumar K (2011) Experimental investigation and optimisation in drilling of GFRP composites. Measurement 44:2138–214810.1016/j.measurement.2011.07.023 ↗
13. Palanikumar K, Rubio JC, Abrao AM, Correia AE, Davim JP (2008) Influence of drill point angle in high speed drilling of glass fiber reinforced plastics. J Compos Mater 42(24):2585–259710.1177/0021998308096322 ↗
14. Nalbant M, Gokkaya H, Toktas I, Sur G (2009) The experimental investigation of the effects of uncoated, PVD- and CVD- coated cemented carbide inserts and cutting parameters on surface roughness in CNC turning and its prediction using Artificial neural networks. Robot Comput Integr Manuf 25:211–22310.1016/j.rcim.2007.11.004 ↗
15. Oktem H, Erzurumlu T, Kurtaran H (2005) Application of response surface methodology in the optimization of cutting conditions for surface roughness. J Mater Process Technol 170:11–1610.1016/j.jmatprotec.2005.04.096 ↗
16. Sarma PMMS, Karunamoorthy L, Palanikumar K (2008) Surface roughness parameters evaluation in machining GFRP composites by PCD tool using digital image processing. J Reinf Plast Compos 28(13):1567–158510.1177/0731684408089858 ↗
17. Everstine GC, Rogers TG (1971) A theory of machining of fiber-reinforced materials. J Composite Materials 5:9410.1177/002199837100500109 ↗
18. Bhatnagar N, Naik NK, Ramakrishnan N (1993) Experimental investigations of drilling on CFRP composites. Mater Manuf Processes 8(6):683–70110.1080/10426919308934873 ↗
19. Ahmad JS, Urban N, Cheraghi H (2012) Machining damage in edge trimming of CFRP. Mater Manuf Processes 27(7):802–80810.1080/10426914.2011.648253 ↗
20. Karkalos NE, Galanis NI, Markopoulos AP (2016) Surface roughness prediction for the milling of Ti–6Al–4V ELI alloy with the use of statistical and soft computing techniques. Measurement 90:25–3510.1016/j.measurement.2016.04.039 ↗
21. Palanikumar K, Latha B, Senthilkumar VS, Davim JP (2013) Application of artificial neural network for the prediction of surface roughness in drilling GFRP composites. Mater Sci Forum 766:21–3610.4028/www.scientific.net/MSF.766.21 ↗
22. Rajasekaran T, Palanikumar K, Vinayagam BK (2011) Application of fuzzy logic for modeling surface roughness in turning CFRP using CBN tool. Prod Eng Res Devel 5:191–19910.1007/s11740-011-0297-y ↗
23. Rajasekaran T, Palanikumar K, Vinayagam BK (2011) Experimental investigation and analysis in turning of CFRP composites. J Compos Mater 46(7):809–82110.1177/0021998311410500 ↗
24. Rajasekaran T, Palanikumar K, Vinayagam BK (2012) Turning CFRP composites with ceramic tool for surface roughness analysis. Procedia Eng 38:2922–292910.1016/j.proeng.2012.06.341 ↗
25. Sakuma K, Seto M (1983) Tool wear in cutting glass-fibre-reinforced-plastics (the relation between fibre orientation and tool wear). Bull JSME 26(2018):1420–142710.1299/jsme1958.26.1420 ↗
26. Bhatnagar N, Ramakrishnan NK, Komanduri R (1995) On the machining of fibre reinforced plastic (FRP) composite laminates. Int Jl Mach Tools Manufact 35(5):701–71610.1016/0890-6955(95)93039-9 ↗
27. Palanikumar K, Mata F, Davim JP (2008) Analysis of surface roughness parameters in turning of FRP tubes by PCD tool. J Mater Process Technol 204:469–47410.1016/j.jmatprotec.2007.12.088 ↗
28. Tsao PL, Liu YG (2002) Study on PCD machining. Int J Mach Tools Manuf 42:331–33410.1016/S0890-6955(01)00131-6 ↗
29. Yen J, Langari R (2006) Fuzzy Logic intelligence, Control, and Information. Ltd, New Delhi, Dorling Kindersley (India) Pvt
30. Latha B, Senthilkumar VS (2010) Application of artificial intelligence for the prediction of delamination in drilling GFRP composites. Int J Prec Technol 1(3/4):314–33010.1504/IJPTECH.2010.031660 ↗
31. Kaviarasan V, Venkatesan R, Natarajan E (2019) Prediction of surface quality and optimization of process parameters in drilling of Delrin using neural network. Progr Rubber Plast Recycl Technol. 35(3):149–169. https://doi.org/10.1177/147776061985507810.1177/1477760619855078 ↗
32. Natarajan E, Kaviarasan V, Lim WH, TiangSSand Tan TT (2018) Enhanced multi-objective teaching-learning-based optimization for machining of Delrin. IEEE Access 6:51528–51546. https://doi.org/10.1109/ACCESS.2018.286904010.1109/ACCESS.2018.2869040 ↗
33. Natarajan E, Kaviarasan V, Lim WH, Tiang SS, Parasuraman S, Elango S (2020) Non-dominated sorting modified teaching learning -based optimization for multi-objective machining of polytetrafluoroethylene, (PTFE). J Intell Manuf 31:911–93510.1007/s10845-019-01486-9 ↗
34. Latha B, Senthilkumar VS (2009) Analysis of thrust force in drilling glass fiber-reinforced plastic composites using fuzzy logic. Mater Manuf Processes 24(4):509–51610.1080/10426910802714688 ↗
35. Jain AM, Haron H, Sharif S (2010) Prediction of surface roughness in the end milling machining using Artificial Neural Network. Expert Syst Appl 37:1755–176810.1016/j.eswa.2009.11.055 ↗
36. Davim JP, Mata F (2007) New machinability study of glass fiber reinforced plastics using polycrystalline diamond and cemented carbide (K15) tools. Mater Des 28:1050–105410.1016/j.matdes.2005.09.019 ↗
37. Ferreira JR, Coppini NL, Miranda GWA (1999) Machining optimization in carbon fiber reinforced composite materials. J Mater Process Technol 92–93:135–14010.1016/S0924-0136(99)00221-6 ↗
38. Palanikumar K, Paulo DJ (2007) Mathematical model to predict tool wear on the machining of glass fibre reinforced plastic composites. Mater Des 28:2008–201410.1016/j.matdes.2006.06.018 ↗
39. Santhanakrishnan G, Krishnamurthy R, Malhotra SK (1992) Investigation into the machining of carbon fibre reinforced plastics with cemented carbides. J Mater Process Technol 30:263–27510.1016/0924-0136(92)90219-I ↗