High-temperature proton exchange membranes with tunable acidity of phosphonic acid groups by incorporating zwitterionic aromatic moieties
Source abstract
Abstract
Abstract The electrochemical performance and durability of high-temperature proton exchange membranes (HT-PEMs) are critically influenced by the effective distribution of proton conductors, electrolyte retention, and interfacial compatibility. Here we present three acidic types of proton conductors (covalently bonded PA, ion-pair bonded PA, and free PA) within phosphonated zwitterionic aromatic polymer structure, allowing for the precise regulation of proton conductors distribution to satisfy the performance of HT-PEMs. Covalently bonded PA groups and ion-pair bonded PA function as fixed proton sources, anhydride inhibitors, and free radical scavengers, effectively mitigating the dependence of proton conductivity on free PA. Furthermore, the incorporation of ion pair coordination significantly reduces the proton conductors leaching during operation. By optimizing the ratio of these proton conductors, polyelectrolytes maintain excellent proton conductivity stability and outstanding fuel cell performance. The resulting membrane, with high proton conductivity of 183 mS cm −1 and outstanding peak power densities of 728 mW cm −2 , delivers a low voltage decay rate of only 0.367 mV h −1 over 140 h period at 140 °C, opening up route for high-performance HT-PEM with low PA adsorption (105%) and high PA retention (68%).
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Membrane-based Ion Separation Techniques · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Jiao, K. et al. Designing the next generation of proton-exchange membrane fuel cells. Nature 595, 361–369 (2021).10.1038/s41586-021-03482-7 ↗
2. Haider, R. et al. High temperature proton exchange membrane fuel cells: progress in advanced materials and key technologies. Chem. Soc. Rev. 50, 1138–1187 (2021).10.1039/D0CS00296H ↗
3. Yang, J. et al. Oxygen- and proton-transporting open framework ionomer for medium-temperature fuel cells. Science 385, 1115–1121 (2024).10.1126/science.adq2259 ↗
4. Qu, E. et al. Proton exchange membranes for high temperature proton exchange membrane fuel cells: challenges and perspectives. J. Power Sources 533, 231386–231406 (2022).10.1016/j.jpowsour.2022.231386 ↗
5. Tongsh, C. et al. Fuel cell stack redesign and component integration radically increase power density. Joule 8, 175–192 (2024).10.1016/j.joule.2023.12.003 ↗
6. Bai, Y. et al. Polyphenylene Ionomer as a fortifier of microphase separation in highly conductive and durable Polybenzimidazole‐based high‐temperature proton exchange membranes. Adv. Energy Mater. 14, 9 (2024).10.1002/aenm.202400751 ↗
7. Qu, E. et al. Composite membranes consisting of acidic carboxyl-containing polyimide and basic polybenzimidazole for high-temperature proton exchange membrane fuel cells. J. Mater. Chem. A 11, 12885–12895 (2023).10.1039/D2TA08904A ↗
8. Abd Elkodous, M., Maegawa, K. & Matsuda, A. Polybenzimidazole dispersed polymer coated nanowires as efficient electrolytes for proton exchange membrane fuel cells. Sci. Rep. 14, 14884–14895 (2024).10.1038/s41598-024-65955-9 ↗
9. Zhang, L. et al. Double cross-linked 3D layered PBI proton exchange membranes for stable fuel cell performance above 200 °C. Nat. Commun. 15, 3409–3023 (2024).10.1038/s41467-024-47627-4 ↗
10. Staiger, A. et al. Anhydrous proton transport within phosphonic acid layers in monodisperse telechelic polyethylenes. J. Am. Chem. Soc. 143, 16725–16733 (2021).10.1021/jacs.1c08031 ↗
11. Atanasov, V. et al. Synergistically integrated phosphonated poly(pentafluorostyrene) for fuel cells. Nat. Mater. 20, 370–377 (2021).10.1038/s41563-020-00841-z ↗
12. Hao, X. et al. Intermolecular acid–base‐pairs containing poly (p‐Terphenyl‐co‐Isatin Piperidinium) for high temperature proton exchange membrane fuel cells. Energy Environ. Mater. 7, e1261–e1270 (2023).
13. Lee, K.-S., Spendelow, J. S., Choe, Y.-K., Fujimoto, C. & Kim, Y. S. An operationally flexible fuel cell based on quaternary ammonium-biphosphate ion pairs. Nat. Energy 1, 1–7 (2016).10.1038/nenergy.2016.120 ↗
14. Bai, H. J. et al. Poly(arylene piperidine)s with phosphoric acid doping as high temperature polymer electrolyte membrane for durable, high-performance fuel cells. J. Power Sources 443, 227219–227228 (2019).10.1016/j.jpowsour.2019.227219 ↗
15. Zheng, W. et al. Poly(dibenzothiophene-terphenyl piperidinium) for high-performance anion exchange membrane water electrolysis. Angew. Chem. Int. Ed. 63, e202405738–e202405758 (2024).10.1002/anie.202405738 ↗
16. Lim, K. H. et al. Protonated phosphonic acid electrodes for high power heavy-duty vehicle fuel cells. Nat. Energy 7, 248–259 (2022).10.1038/s41560-021-00971-x ↗
17. Hao, X. et al. A phosphonated phenol-formaldehyde-based high-temperature proton exchange membrane with intrinsic protonic conductors and proton transport channels. J. Mater. Chem. A 10, 10916–10925 (2022).10.1039/D2TA00986B ↗
18. Wang, Y. et al. Construction of novel proton transport channels by triphosphonic acid proton conductor-doped crosslinked mPBI-based high-temperature and low-humidity proton exchange membranes. ACS Sustain. Chem. Eng. 9, 2861–2871 (2021).10.1021/acssuschemeng.0c08799 ↗
19. Mochizuki, T. et al. Temperature- and humidity-controlled SAXS analysis of proton-conductive ionomer membranes for fuel cells. ChemSusChem. 7, 729–733 (2014).10.1002/cssc.201301322 ↗
20. Jang, S., Kim, S. Y., Jung, H. Y. & Park, M. J. Phosphonated polymers with fine-tuned Ion clustering behavior: toward efficient proton conductors. Macromolecules 51, 1120–1128 (2018).10.1021/acs.macromol.7b02449 ↗
21. Teixeira, F. C., Teixeira, A. P. S. & Rangel, C. M. New proton conductive membranes of indazole- and condensed pyrazolebisphosphonic acid-Nafion membranes for PEMFC. Renew. Energy 196, 1187–1196 (2022).10.1016/j.renene.2022.07.054 ↗
22. Li, Z. et al. In situ implantation of cross-linked functional POSS blocks in Nafion® for high performance direct methanol fuel cells. J. Membr. Sci. 640, 119798–119808 (2021).10.1016/j.memsci.2021.119798 ↗
23. Xue, B., Zheng, Z., Qian, H., Wang, Z. & Yan, J. Robust proton-exchange membranes based on perfluorosulfonic acid-functionalized poly(phenyl-alkane) and polyxanthene: effects of skeletal structures on membrane properties. Macromolecules 57, 3376–3387 (2024).10.1021/acs.macromol.4c00117 ↗
24. Tang, H. et al. Fuel cells with an operational range of –20 °C to 200 °C enabled by phosphoric acid-doped intrinsically ultramicroporous membranes. Nat. Energy 2, 153–164 (2022).10.1038/s41560-021-00956-w ↗
25. Kang, N. R., Pham, T. H., Nederstedt, H. & Jannasch, P. Durable and highly proton conducting poly(arylene perfluorophenylphosphonic acid) membranes. J. Membr. Sci. 623, 119074–119082 (2021).10.1016/j.memsci.2021.119074 ↗
26. Firouz Tadavani, K. et al. Synergistic behavior of phosphonated and sulfonated groups on proton conductivity and their performance for high-temperature proton exchange membrane fuel cells (PEMFCs). Energy Fuels 31, 11460–11470 (2017).10.1021/acs.energyfuels.7b01065 ↗
27. Li, H. et al. Electrode binder design for high-power, low-Pt loading and durable high temperature fuel cells. Energy Environ. Sci. 17, 3651–3659 (2024).10.1039/D4EE00646A ↗
28. Zhang, Z. A. et al. Uneven phosphoric acid interfaces with enhanced electrochemical performance for high-temperature polymer electrolyte fuel cells. Sci. Adv. 9, 1194–1204 (2023).10.1126/sciadv.ade1194 ↗
29. You, X. et al. High conductivity poly(meta-terphenyl alkylene)s proton exchange membranes for high temperature fuel cell. Chem. Eng. J. 487, 150535–150545 (2024).10.1016/j.cej.2024.150535 ↗
30. Guan, X. et al. Highly acid-stable high-temperature proton exchange membrane: azide-based polymeric ionic liquids for the enhancement of amino-polybenzimidazole. J. Power Sources 615, 235069–235079 (2024).10.1016/j.jpowsour.2024.235069 ↗
31. Huang, L. et al. High free volume crosslinked membranes constructed by stereocrosslinker for high-temperature proton-exchange membrane fuel cells. J. Membr. Sci. 709, 123100–123108 (2024).10.1016/j.memsci.2024.123100 ↗
32. Sun, X. et al. The impact of imidazolium with steric hindrance on the dissociation of phosphoric acid and the performance of high-temperature proton exchange membranes. J. Mater. Chem. A 36, 24499–24507 (2024).10.1039/D4TA03948C ↗
33. Han, Y., Chen, Y., Huang, K., Xu, F. & Lin, B. Semi-interpenetrating high-temperature proton exchange membranes based on cross-linked poly(fluorenyl-terphenyl-piperidinium) and poly(vinylbenzyl chloride-co-vinylbenzyl chloride) for fuel cells. ACS Appl. Polym. Mater. 6, 9152–9159 (2024).10.1021/acsapm.4c01486 ↗
34. Wu, W. et al. Introduction of polymeric ionic liquids containing quaternary ammonium groups to construct high-temperature proton exchange membranes with high proton conductivity and stability. J. Colloid Interface Sci. 675, 689–699 (2024).10.1016/j.jcis.2024.06.195 ↗
35. Kim, H. et al. Fabrication of thermally cross-linked polybenzimidazole membranes using a di-azide cross-linker for high temperature proton exchange membrane fuel cells. J. Power Sources 614, 234981–234990 (2024).10.1016/j.jpowsour.2024.234981 ↗
36. You, Y., Deng, X., Liu, Q., Hou, Y. & Miao, S. A semi-flexible polybenzimidazole with enhanced comprehensive performance for high-temperature proton exchange membrane fuel cells. Int. J. Hydrog. Energy 78, 879–888 (2024).10.1016/j.ijhydene.2024.06.324 ↗
37. Wang, Q. et al. Preparation of novel membranes with multiple hydrogen bonding sites and π-conjugated structure for high temperature proton exchange membrane fuel cells. Chem. Commun. 60, 5318–5321 (2024).10.1039/D4CC01089B ↗