Unidentified major p-type source in SnSe: Multivacancies
Source abstract
Abstract
Abstract Tin selenide (SnSe) is considered a robust candidate for thermoelectric applications due to its very high thermoelectric figure of merit, ZT, with values of 2.6 in p-type and 2.8 in n-type single crystals. Sn has been replaced with various lower group dopants to achieve successful p-type doping in SnSe with high ZT values. A known, facile, and powerful alternative way to introduce a hole carrier is to use a natural single Sn vacancy, VSn. Through transport and scanning tunneling microscopy studies, we discovered that VSn are dominant in high-quality (slow cooling rate) SnSe single crystals, while multiple vacancies, Vmulti, are dominant in low-quality (high cooling rate) single crystals. Surprisingly, both VSn and Vmulti help to increase the power factors of SnSe, whereas samples with dominant VSn have superior thermoelectric properties in SnSe single crystals. Additionally, the observation that Vmulti are good p-type sources observed in relatively low-quality single crystals is useful in thermoelectric applications because polycrystalline SnSe can be used due to its mechanical strength; this substance is usually fabricated at very high cooling speeds.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · 2D Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Liu, W. et al. Convergence of conduction bands as a means of enhancing thermoelectric performance of n-type Mg2Si1–xSnx solid solutions. Phys. Rev. Lett. 108, 1–5 (2012).10.1103/PhysRevLett.108.166601 ↗
2. Pei, Y. et al. Convergence of electronic bands for high performance bulk thermoelectrics. Nature 473, 66–69 (2011).10.1038/nature09996 ↗
3. Girard, S. N. et al. High performance Na-doped PbTe–PbS thermoelectric materials: Electronic density of states modification and shape-controlled nanostructures. J. Am. Chem. Soc. 133, 16588–16597 (2011).10.1021/ja206380h ↗
4. Chen, C.-L., Wang, H., Chen, Y.-Y., Day, T. & Snyder, G. J. Thermoelectric properties of p-type polycrystalline SnSe doped with Ag. J. Mater. Chem. A 2, 11171–11176 (2014).10.1039/C4TA01643B ↗
5. Zhang, Q. et al. Studies on Thermoelectric Properties of n-type Polycrystalline SnSe1–xSx by Iodine Doping. Adv. Energy Mater. 5, 1–8 (2015).10.1002/aenm.201500360 ↗
6. Tang, G. et al. Rock-salt-type nanoprecipitates lead to high thermoelectric performance in undoped polycrystalline SnSe. RSC Adv. 7, 8258–8263 (2017).10.1039/C7RA00140A ↗
7. Son, J. S. et al. N-type nanostructured thermoelectric materials prepared from chemically synthesized ultrathin Bi2Te3 nanoplates. Nano Lett. 12, 640–647 (2012).10.1021/nl203389x ↗
8. Jood, P. et al. Na doping in PbTe-solubility, band convergence, phase boundary mapping, and thermoelectric properties. J. Am. Chem. Soc. 142, 15464–15475 (2020).10.1021/jacs.0c07067 ↗
9. Wang, H., Pei, Y., Lalonde, A. D. & Snyder, G. J. Heavily doped p-type PbSe with high thermoelectric performance: An alternative for PbTe. Adv. Mater. 23, 1366–1370 (2011).10.1002/adma.201004200 ↗
10. Venkatasubramanian, R., Siivola, E., Colpitts, T. & O’Quinn, B. Thin-film thermoelectric devices with high room-temperature figures of merit. Nature 413, 597–602 (2001).10.1038/35098012 ↗
11. Liu, Z. Shaping the role of germanium vacancies in germanium telluride: Metastable cubic structure stabilization, band structure modification, and stable N-type conduction. NPG Asia Mater. 12, 66 (2020).10.1038/s41427-020-00247-y ↗
12. Jang, H. et al. Regulating Te vacancies through dopant balancing via excess Ag enables rebounding power factor and high thermoelectric performance in p-type PbTe. Adv. Sci. 8, 2100895 (2021).10.1002/advs.202100895 ↗
13. Shuai, J., Sun, Y., Tan, X. & Mori, T. Manipulating the Ge vacancies and Ge precipitates through Cr doping for realizing the high-performance GeTe thermoelectric material. Small 16, 1906921 (2020).10.1002/smll.201906921 ↗
14. Pang, H. et al. Realizing N‑type SnTe thermoelectrics with competitive performance through suppressing Sn vacancies. J. Am. Chem. Soc. 143, 8538–8542 (2021).10.1021/jacs.1c02346 ↗
15. Maclaren, D. A. & Bos, J. G. Low thermal conductivity and promising thermoelectric performance in AxCoSb (A = V, Nb or Ta) half-Heuslers with inherent vacancies. J. Mater. Chem. C 7, 6539–6547 (2019).10.1039/C9TC00743A ↗
16. Zhao, L.-D. et al. Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals. Nature 508, 373–377 (2014).10.1038/nature13184 ↗
17. Lee, S. et al. Resonant bonding leads to low lattice thermal conductivity. Nat. Commun. 5, 1–8 (2014).
18. Li, C. W. et al. Orbitally driven giant phonon anharmonicity in SnSe. Nat. Phys. 11, 1063–1069 (2015).10.1038/nphys3492 ↗
19. Zhao, L. et al. Ultrahigh power factor and thermoelectric performance in hole- doped single-crystal SnSe. Science 351, 141–144 (2016).10.1126/science.aad3749 ↗
20. Peng, K. et al. Broad temperature plateau for high ZTs in heavily doped p-type SnSe single crystals. Energy Environ. Sci. 9, 454–460 (2016).10.1039/C5EE03366G ↗
21. Wei, T.-R. et al. Thermoelectric transport properties of pristine and Na-doped SnSe1−xTex polycrystals. Phys. Chem. Chem. Phys. 17, 30102–30109 (2015).10.1039/C5CP05510E ↗
22. Wei, T. R. et al. Distinct impact of alkali-ion doping on electrical transport properties of thermoelectric p-type polycrystalline SnSe. J. Am. Chem. Soc. 138, 8875–8882 (2016).10.1021/jacs.6b04181 ↗
23. Jin, M. et al. Single crystal growth of Sn0.97Ag0.03Se by a novel horizontal Bridgman method and its thermoelectric properties. J. Cryst. Growth 460, 112–116 (2017).10.1016/j.jcrysgro.2016.12.087 ↗
24. Kim, J. H. et al. Indium substitution effect on thermoelectric and optical properties of Sn1–xInxSe compounds. J. Alloy. Compd. 682, 785–790 (2016).10.1016/j.jallcom.2016.04.308 ↗
25. Yang, G. et al. Enhancing the thermoelectric performance of polycrystalline SnSe by decoupling electrical and thermal transport through carbon fiber incorporation. ACS Appl. Mater. Interfaces 12, 12910–12918 (2020).10.1021/acsami.0c00873 ↗
26. Nguyen, V. Q. et al. Thermoelectric properties of hot-pressed Bi-doped n-type polycrystalline SnSe. Nanoscale Res. Lett. 13, 4–10 (2018).10.1186/s11671-018-2500-y ↗
27. Duong, A. T. et al. Achieving ZT=2.2 with Bi-doped n-type SnSe single crystals. Nat. Commun. 7, 1–6 (2016).10.1038/ncomms13713 ↗
28. Wang, X. et al. Optimization of thermoelectric properties in n-type SnSe doped with BiCl3. Appl. Phys. Lett. 108, 1–6 (2016).
29. Chang, C. et al. Raising thermoelectric performance of n-type SnSe via Br doping and Pb alloying. RSC Adv. 6, 98216–98220 (2016).10.1039/C6RA21884A ↗
30. Xiao, Y. & Zhao, L. D. Seeking new, highly effective thermoelectrics. Science 367, 1196–1197 (2020).10.1126/science.aaz9426 ↗
31. Zhou, C. et al. Polycrystalline SnSe with a thermoelectric figure of merit greater than the single crystal. Nat. Mater. 20, 1378–1384 (2021).10.1038/s41563-021-01064-6 ↗
32. Duvjir, G. et al. Origin of p-type characteristics in a SnSe single crystal. Appl. Phys. Lett. 110, 262106 (2017).10.1063/1.4991003 ↗
33. Wu, D. et al. Direct observation of vast off -stoichiometric defects in single crystalline SnSe. Nano Energy 35, 321–330 (2017).10.1016/j.nanoen.2017.04.004 ↗
34. Zhou, Y. et al. Influence of defects on the thermoelectricity in SnSe: A comprehensive theoretical study. Phys. Rev. B 97, 1–8 (2018).10.1103/PhysRevB.97.245202 ↗
35. Huang, Y. et al. First-principles study on intrinsic defects of SnSe. RSC Adv. 7, 27612–27618 (2017).10.1039/C7RA03367B ↗