One-step synthesis of dandelion-like lanthanum titanate nanostructures for enhanced photocatalytic performance
Source abstract
Abstract
Abstract The rational design of nanomaterials with distinct exposed facets is of great importance for improving the physicochemical properties of these materials and for the study of structure–activity relationships. This work describes the first synthesis of lanthanum titanate (La2Ti2O7, LTO) with dandelion-like nanostructures via the molten salt method. The lowest synthesis temperature of 700 °C is at least 200 °C lower than that required by other methods. The dandelion structure consists of well-crystallized LTO nanorods (NRs) with sizes of less than 100 nm in the radial direction and 300–500 nm in the axial direction, which is different from the widely accepted two-dimensional form. LaOCl microplates were formed as an intermediate substrate for LTO NR growth outwards to the basal surfaces of the LaOCl crystallites. DFT calculation results showed that the strong LiCl adsorption on the (100) surface led to distinct growth of the (100) and (020) planes, thus promoting the rod-like growth of LTO along the [010] axis. In addition, the photocatalytic performance of as-prepared LTO was evaluated by determining the degradation of rhodamine B. The results suggested that the as-prepared LTO could markedly enhance the photocatalytic activity as a result of the surface heterojunction of coexposed {100} and {002} facets in LTO NRs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Photocatalysis Techniques · Perovskite Materials and Applications · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Ishizawa, N., Marumo, F., Iwai, S., Kimura, M. & Kawamura, T. Compounds with perovskite-type slabs. V. A high-temperature modification of La2Ti2O7. Acta Crystallogr. B 38, 368–372 (1982).10.1107/S0567740882002994 ↗
2. Yan, H., Ning, H., Kan, Y., Wang, P. & Reece, M. J. Piezoelectric ceramics with super-high curie points. J. Am. Ceram. Soc. 92, 2270–2275 (2009).10.1111/j.1551-2916.2009.03209.x ↗
3. Lu, Y. et al. Reactive sputtering deposition of perovskite oxide and oxynitride lanthanum titanium films: structural and dielectric characterization. Cryst. Growth Des. 13, 4852–4858 (2013).10.1021/cg4010196 ↗
4. Wang, Z., Teramura, K., Hosokawa, S. & Tanaka, T. Photocatalytic conversion of CO2 in water over Ag-modified La2Ti2O7. Appl. Catal. B: Environ. 163, 241–247 (2015).10.1016/j.apcatb.2014.07.052 ↗
5. Kim, J. et al. Nickel-loaded La2Ti2O7 as a bifunctional photocatalyst. Chem. Commun. 21, 2488–2489 (2002).10.1039/b208092c ↗
6. Hwang, D. W. et al. Photocatalytic degradation of CH3Cl over a nickel-loaded layered perovskite. Ind. Eng. Chem. Res. 42, 1184–1189 (2003).10.1021/ie020457c ↗
7. Arney, D., Porter, B., Greve, B. & Maggard, P. A. New molten-salt synthesis and photocatalytic properties of La2Ti2O7 particles. J. Photochem. Photobiol. A 199, 230–235 (2008).10.1016/j.jphotochem.2008.06.005 ↗
8. Abe, R., Higashi, M., Sayama, K., Abe, Y. & Sugihara, H. Photocatalytic activity of R3MO7 and R2Ti2O7 (R = Y, Gd, La; M = Nb, Ta) for water splitting into H2 and O2. J. Phys. Chem. B 110, 2219–2226 (2006).10.1021/jp0552933 ↗
9. Li, K., Wang, Y., Wang, H., Zhu, M. & Yan, H. Hydrothermal synthesis and photocatalytic properties of layered La2Ti2O7 nanosheets. Nanotechnology 17, 4863 (2006).10.1088/0957-4484/17/19/014 ↗
10. Song, H., Peng, T., Cai, P., Yi, H. & Yan, C. Hydrothermal synthesis of flaky crystallized La2Ti2O7 for producing hydrogen from photocatalytic water splitting. Catal. Lett. 113, 54–58 (2007).10.1007/s10562-006-9004-6 ↗
11. Kawashima, K. et al. An NH3-assisted flux-mediated direct growth of LaTiO2N crystallites for visible-light-induced water splitting. J. Phys. Chem. C. 119, 15896–15904 (2015).10.1021/acs.jpcc.5b03718 ↗
12. Feng, J. et al. Highly photo-responsive LaTiO2N photoanodes by improvement of charge carrier transport among film particles. Adv. Funct. Mater. 24, 3535–3542 (2014).10.1002/adfm.201304046 ↗
13. Wang, Q., Hisatomi, T., Moriya, Y., Maeda, K. & Domen, K. Physicochemical properties and photocatalytic H2 evolution activity of Rh-doped La2Ti2O7 prepared by molten salt synthesis. Catal. Sci. Technol. 3, 2098–2103 (2013).10.1039/c3cy00179b ↗
14. Wagata, H. et al. Chloride flux growth of La2Ti2O7 crystals and subsequent nitridation to form LaTiO2N crystals. Cryst. Growth Des. 15, 124–128 (2014).10.1021/cg5010006 ↗
15. Hojamberdiev, M., Yamaguchi, A., Yubuta, K., Oishi, S. & Teshima, K. Fabrication of La2Ti2O7 crystals using an alkali-metal molybdate flux growth method and their nitridability to form LaTiO2N crystals under a high-temperature NH3 atmosphere. Inorg. Chem. 54, 3237–3244 (2015).10.1021/ic502862t ↗
16. Orum, A. K. et al. Atomic force microscopy surface analysis of layered perovskite La2Ti2O7 particles grown by molten flux method. Jpn. J. Appl. Phys. 55, 08NB08 (2016).10.7567/JJAP.55.08NB08 ↗
17. Cai, X. et al. Charge separation in a nanostep structured perovskite-type photocatalyst induced by successive surface heterojunctions. J. Mater. Chem. A 5, 10442–10449 (2017).10.1039/C7TA02379K ↗
18. Cai, X. et al. Au nanorod photosensitized La2Ti2O7 nanosteps: successive surface heterojunctions boosting visible to near-infrared photocatalytic H2 evolution. ACS Catal. 8, 122–131 (2017).10.1021/acscatal.7b02972 ↗
19. Mao, L., Cai, X., Yang, S., Han, K. & Zhang, J. Black phosphorus-CdS-La2Ti2O7 ternary composite: effective noble metal-free photocatalyst for full solar spectrum activated H2 production. Appl. Catal. B: Environ. 242, 441–448 (2019).10.1016/j.apcatb.2018.10.007 ↗
20. Huang, Z. et al. Molten salt synthesis of La2Zr2O7 ultrafine powders. Ceram. Int. 42, 6221–6227 (2016).10.1016/j.ceramint.2016.01.004 ↗
21. Huang, Z., Duan, H., Liu, J. & Zhang, H. Preparation of lanthanum cerate powders via a simple molten salt route. Ceram. Int. 42, 10482–10486 (2016).10.1016/j.ceramint.2016.03.063 ↗
22. Huang, Z. et al. Preparation of CaZrO3 powders by a microwave-assisted molten salt method. J. Ceram. Soc. Jpn. 124, 593–596 (2016).10.2109/jcersj2.15309 ↗
23. Huang, Z. et al. Low temperature molten salt preparation of molybdenum nanoparticles. Int. J. Refract. Met. H. 54, 315–321 (2016).
24. Huang, Z., Zhang, H. & Zhang, S. Growth of well-developed LaOCl microplates by chloride salt-assisted method. CrystEngComm 19, 2971–2976 (2017).10.1039/C7CE00549K ↗
25. Yang, H. G. et al. Antase TiO2 single crystals with a large percentage of reactive facets. Nature 453, 638–641 (2008).10.1038/nature06964 ↗
26. Lin, R. et al. Quantitative study of charge carrier dynamics in well-defined WO3 nanowires and nanosheets: insight into the crystal facet effect in photocatalysis. J. Am. Chem. Soc. 140, 9078–9082 (2018).10.1021/jacs.8b05293 ↗
27. Yu, J., Low, J., Xiao, W., Zhou, P. & Jaroniec, M. Enhanced photocatalytic CO2-reduction activity of anatase TiO2 by coexposed {001} and {101} facets. J. Am. Chem. Soc. 136, 8839–8842 (2014).10.1021/ja5044787 ↗
28. Liu, X., Dong, G., Li, S., Lu, G. & Bi, Y. Direct observation of charge separation on anatase TiO2 crystals with selectively etched {001} facets. J. Am. Chem. Soc. 138, 2917–2920 (2016).10.1021/jacs.5b12521 ↗
29. Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169 (1996).10.1103/PhysRevB.54.11169 ↗
30. Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996).10.1103/PhysRevLett.77.3865 ↗
31. Gu, Y. et al. Nitridation of silicon powders catalyzed by cobalt nanoparticles. J. Am. Ceram. Soc. 98, 1762–1768 (2015).10.1111/jace.13554 ↗
32. Vanderbilt, D. Soft self-consistent pseudopotentials in a generalized eigenvalue formalism. Phys. Rev. B 41, 7892–7895 (1990).10.1103/PhysRevB.41.7892 ↗
33. Tafreshi, S. S., Roldan, A., Dzade, N. Y. & de Leeuw, N. H. Adsorption of hydrazine on the perfect and defective copper (111) surface: A dispersion-corrected DFT study. Surf. Sci. 622, 1–8 (2014).10.1016/j.susc.2013.11.013 ↗
34. Zhou, L., Xiu, F., Qiu, M., Xia, S. & Yu, L. The adsorption and dissociation of water molecule on goethite (010) surface: a DFT approach. Appl. Surf. Sci. 392, 760–767 (2017).10.1016/j.apsusc.2016.09.038 ↗
35. Gu, M., Wang, Z., Wang, C. & Zheng, J. Atomic scale study of surface orientations and energies of Ti2O3 crystals. Appl. Phys. Lett. 111, 181603 (2017).10.1063/1.5004017 ↗
36. Afanasiev, P., Aouine, M., Deranlot, C. & Epicier, T. Ordered arrays of nanorods obtained by solid-liquid reactions of LaOCl crystals. Chem. Mater. 22, 5411–5419 (2010).10.1021/cm100090e ↗
37. Hou, X. et al. Single-crystal MoO3 micrometer and millimeter belts prepared from discarded molybdenum disilicide heating elements. Sci. Rep. 8, 16771 (2018).
38. Wu, N. Q. et al. Shape-enhanced photocatalytic activity of single-crystalline anatase TiO2 (101) nanobelts. J. Am. Chem. Soc. 132, 6679–6685 (2010).10.1021/ja909456f ↗
39. Boppella, R., Choi, C. H., Moon, J. & Kim, D. H. Spatial charge separation on strongly coupled 2D-hybrid of rGO/La2Ti2O7/NiFe-LDH heterostructures for highly efficient noble metal free photocatalytic hydrogen generation. Appl. Catal. B: Environ. 239, 178–186 (2018).10.1016/j.apcatb.2018.07.063 ↗
40. Hu, S., Chi, B., Pu, J. & Jian, L. Novel heterojunction photocatalysts based on lanthanum titanate nanosheets and indium oxide nanoparticles with enhanced photocatalytic hydrogen production activity. J. Mater. Chem. A 2, 19260–19267 (2014).10.1039/C4TA04177A ↗
41. Selloni, A. Crystal growth: anatase shows its reactive side. Nat. Mater. 7, 613–615 (2008).10.1038/nmat2241 ↗
42. Li, R. et al. Spatial separation of photogenerated electrons and holes among {010} and {110} crystal facets of BiVO4. Nat. Commun. 4, 1432 (2013).