Brushing up functional materials
Source abstract
Abstract
Abstract Surface-grafting polymer brushes (SPB), which are used in a versatile technique to easily realize surface modifications, can be commonly used to change the inherent surface physical/chemical properties of materials. In particular, producing functional polymer brushes with well-defined chemical configurations, densities, architectures, and thicknesses on a material surface has become increasingly important in many fields. Achieving such goals is highly dependent on the progress of novel surface-grafting strategies, which are commonly based on surface-initiated polymerization (SIP) methods. On the other hand, practical applications have been given more attention since the SPB technique enables the engineering of materials with diverse functions. This review reports some new grafting strategies for generating polymer brush layers and then systematically summarizes research advances in the application of polymer brush-modified materials in multiple fields. Correspondingly, some necessary challenges of the SPB technique are unreservedly pointed out, with consideration given to its real applications in the future. The aim of this article is to tell readers how to engineer functional materials through SPB techniques and what can be done with polymer brushes in the future.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Surface Interaction Studies · Molecular Junctions and Nanostructures · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Barbey, R. et al. Polymer brushes via surface-initiated controlled radical polymerization: Synthesis, characterization, properties, and applications. Chem. Rev. 109, 5437–5527 (2009).10.1021/cr900045a ↗
2. Omar, A. Polymer brushes here, there, and everywhere: Recent advances in their practical applications and emerging opportunities in multiple research fields. J. Polym. Sci., Part A: Polym. Chem. 50, 3225–3258 (2012).10.1002/pola.26119 ↗
3. Edmondson, S., Osborne, V. L. & Huck, W. T. Polymer brushes via surface-initiated polymerizations. Chem. Soc. Rev. 33, 14–22 (2004).10.1039/b210143m ↗
4. Zhao, B. & Brittain, W. J. Polymer brushes: Surface-immobilized macromolecules. Prog. Polym. Sci. 25, 677–710 (2000).10.1016/S0079-6700(00)00012-5 ↗
5. Li, B., Yu, B., Ye, Q. & Zhou, F. Tapping the potential of polymer brushes through synthesis. Acc. Chem. Res. 48, 229–237 (2015).10.1021/ar500323p ↗
6. Minko, S. Responsive polymer brushes. J. Macromol. Sci., Part C 46, 397–420 (2006).10.1080/15583720600945402 ↗
7. Chen, T., Ferris, R., Zhang, J., Ducker, R. & Zauscher, S. Stimulus-responsive polymer brushes on surfaces: Transduction mechanisms and applications. Prog. Polym. Sci. 35, 94–112 (2010).10.1016/j.progpolymsci.2009.11.004 ↗
8. Stuart, M. A. C. et al. Emerging applications of stimuli-responsive polymer materials. Nat. Mater. 9, 101–113 (2010).10.1038/nmat2614 ↗
9. Azzaroni, O., Brown, A. A., & Huck, W.T.S. Tunable wettability by clicking counterions into polyelectrolyte brushes. Adv. Mater. 19, 151–154 (2007).10.1002/adma.200601257 ↗
10. Howarter, J. A. & Youngblood, J. P. Self‐cleaning and anti‐fog surfaces via stimuli‐responsive polymer brushes. Adv. Mater. 19, 3838–3843 (2007).10.1002/adma.200700156 ↗
11. Mei, Y., Lu, Y., Polzer, F., Ballauff, M. & Drechsler, M. Catalytic activity of palladium nanoparticles encapsulated in spherical polyelectrolyte brushes and core−shell microgels. Chem. Mater. 19, 1062–1069 (2007).10.1021/cm062554s ↗
12. Zhang, H. & Ito, Y. Ph control of transport through a porous membrane self-assembled with a poly(acrylic acid) loop brush. Langmuir 17, 8336–8340 (2001).10.1021/la0106079 ↗
13. Lokuge, I., Wang, X. & Bohn, P. W. Temperature-controlled flow switching in nanocapillary array membranes mediated by poly(n-isopropylacrylamide) polymer brushes grafted by atom transfer radical polymerization. Langmuir 23, 305–311 (2007).10.1021/la060813m ↗
14. Mizutani, A., Kikuchi, A., Yamato, M., Kanazawa, H. & Okano, T. Preparation of thermoresponsive polymer brush surfaces and their interaction with cells. Biomaterials. 29, 2073–2081 (2008).10.1016/j.biomaterials.2008.01.004 ↗
15. Erik, W. et al. Controlled cell adhesion on peg‐based switchable surfaces. Angew. Chem., Int. Ed. 47, 5666–5668 (2008).10.1002/anie.200801202 ↗
16. Huck, W. T. S. Responsive polymers for nanoscale actuation. Mater. Today 11, 24–32 (2008).10.1016/S1369-7021(08)70146-9 ↗
17. Bajpai, A. K., Shukla, S. K., Bhanu, S. & Kankane, S. Responsive polymers in controlled drug delivery. Prog. Polym. Sci. 33, 1088–1118 (2008).10.1016/j.progpolymsci.2008.07.005 ↗
18. Wei, Q., Cai, M., Zhou, F. & Liu, W. Dramatically tuning friction using responsive polyelectrolyte brushes. Macromolecules 46, 9368–9379 (2013).10.1021/ma401537j ↗
19. Raviv, U. et al. Lubrication by charged polymers. Nature 425, 163–165 (2003).10.1038/nature01970 ↗
20. Tadmor, R., Janik, J., Klein, J. & Fetters, L. J. Sliding friction with polymer brushes. Phys. Rev. Lett. 91, 115503 (2003).10.1103/PhysRevLett.91.115503 ↗
21. Kobayashi, M. & Takahara, A. Tribological properties of hydrophilic polymer brushes under wet conditions. Chem. Rec. 10, 208–216 (2010).10.1002/tcr.201000001 ↗
22. Moro, T. et al. Surface grafting of artificial joints with a biocompatible polymer for preventing periprosthetic osteolysis. Nat. Mater. 3, 829–836 (2004).10.1038/nmat1233 ↗
23. Kyomoto, M., Moro, T., Takatori, Y., Kawaguchi, H. & Ishihara, K. Cartilage-mimicking, high-density brush structure improves wear resistance of crosslinked polyethylene: A pilot study. Clin. Orthop. Relat. Res. 469, 2327–2336 (2011).10.1007/s11999-010-1718-5 ↗
24. Higaki, Y., Kobayashi, M., Murakami, D. & Takahara, A. Anti-fouling behavior of polymer brush immobilized surfaces. Polym. J. 48, 325 (2016).10.1038/pj.2015.137 ↗
25. Ladd, J., Zhang, Z., Chen, S., Hower, J. C. & Jiang, S. Zwitterionic polymers exhibiting high resistance to nonspecific protein adsorption from human serum and plasma. Biomacromolecules 9, 1357–1361 (2008).10.1021/bm701301s ↗
26. Zdyrko, B. et al. Polymer brushes as active nanolayers for tunable bacteria adhesion. Mater. Sci. Eng., C 29, 680–684 (2009).10.1016/j.msec.2008.12.017 ↗
27. Yang, W. J., Neoh, K.-G., Kang, E.-T., Teo, S. L.-M. & Rittschof, D. Polymer brush coatings for combating marine biofouling. Prog. Polym. Sci. 39, 1017–1042 (2014).10.1016/j.progpolymsci.2014.02.002 ↗
28. Callow, J. A. & Callow, M. E. Trends in the development of environmentally friendly fouling-resistant marine coatings. Nat. Commun. 2, 244 (2011).10.1038/ncomms1251 ↗
29. Tugulu, S., Silacci, P., Stergiopulos, N. & Klok, H. -A. Rgd—functionalized polymer brushes as substrates for the integrin specific adhesion of human umbilical vein endothelial cells. Biomaterials. 28, 2536–2546 (2007).10.1016/j.biomaterials.2007.02.006 ↗
30. Gao, G. et al. The biocompatibility and biofilm resistance of implant coatings based on hydrophilic polymer brushes conjugated with antimicrobial peptides. Biomaterials. 32, 3899–3909 (2011).10.1016/j.biomaterials.2011.02.013 ↗
31. Glinel, K. et al. Antibacterial and antifouling polymer brushes incorporating antimicrobial peptide. Bioconjugate Chem. 20, 71–77 (2009).10.1021/bc800280u ↗
32. Hou, S. et al. Capture and stimulated release of circulating tumor cells on polymer‐grafted silicon nanostructures. Adv. Mater. 25, 1547–1551 (2013).10.1002/adma.201203185 ↗
33. Bruening, M. L., Dotzauer, D. M., Jain, P., Ouyang, L. & Baker, G. L. Creation of functional membranes using polyelectrolyte multilayers and polymer brushes. Langmuir 24, 7663–7673 (2008).10.1021/la800179z ↗
34. Zhao, B., Brittain, W. J., Zhou, W. & Cheng, S. Z. D. Nanopattern formation from tethered ps-b-pmma brushes upon treatment with selective solvents. J. Am. Chem. Soc. 122, 2407–2408 (2000).10.1021/ja992465z ↗
35. Li, D., Sheng, X. & Zhao, B. Environmentally responsive “hairy” nanoparticles: Mixed homopolymer brushes on silica nanoparticles synthesized by living radical polymerization techniques. J. Am. Chem. Soc. 127, 6248–6256 (2005).10.1021/ja0422561 ↗
36. Brittain, W. J. & Minko, S. A structural definition of polymer brushes. J. Polym. Sci., Part A: Polym. Chem. 45, 3505–3512 (2007).10.1002/pola.22180 ↗
37. Wu, T., Efimenko, K. & Genzer, J. Combinatorial study of the mushroom-to-brush crossover in surface anchored polyacrylamide. J. Am. Chem. Soc. 124, 9394–9395 (2002).10.1021/ja027412n ↗
38. Kent, M. S. A quantitative study of tethered chains in various solution conditions using langmuir diblock copolymer monolayers. Macromol. Rapid Commun. 21, 243–270 (2000).10.1002/(SICI)1521-3927(20000301)21:6<243::AID-MARC243>3.0.CO;2-R ↗
39. Bogdan, Z. & Igor, L. Polymer brushes by the “grafting to” method. Macromol. Rapid Commun. 32, 859–869 (2011).10.1002/marc.201100162 ↗
40. Jeffrey, P., Tomasz, K. & Krzysztof, M. Synthesis of polymer brushes using atom transfer radical polymerization. Macromol. Rapid Commun. 24, 1043–1059 (2003).10.1002/marc.200300078 ↗
41. Baum, M. & Brittain, W. J. Synthesis of polymer brushes on silicate substrates via reversible addition fragmentation chain transfer technique. Macromolecules 35, 610–615 (2002).10.1021/ma0112467 ↗
42. Li, C. & Benicewicz, B. C. Synthesis of well-defined polymer brushes grafted onto silica nanoparticles via surface reversible addition−fragmentation chain transfer polymerization. Macromolecules 38, 5929–5936 (2005).10.1021/ma050216r ↗
43. Johnson, J. A. et al. Drug-loaded, bivalent-bottle-brush polymers by graft-through romp. Macromolecules 43, 10326–10335 (2010).10.1021/ma1021506 ↗
44. Brinks Marion, K. & Studer, A. Polymer brushes by nitroxide‐mediated polymerization. Macromol. Rapid Commun. 30, 1043–1057 (2009).10.1002/marc.200800720 ↗
45. Tang, W. et al. Understanding atom transfer radical polymerization: Effect of ligand and initiator structures on the equilibrium constants. J. Am. Chem. Soc. 130, 10702–10713 (2008).10.1021/ja802290a ↗
46. Zhu, B. & Edmondson, S. Polydopamine-melanin initiators for surface-initiated atrp. Polymer. (Guildf). 52, 2141–2149 (2011).10.1016/j.polymer.2011.03.027 ↗
47. Chmielarz, P. et al. Electrochemically mediated atom transfer radical polymerization (eatrp). Prog. Polym. Sci. 69, 47–78 (2017).10.1016/j.progpolymsci.2017.02.005 ↗
48. Li, B., Yu, B., Huck, W. T. S., Zhou, F. & Liu, W. Electrochemically induced surface‐initiated atom‐transfer radical polymerization. Angew. Chem., Int. Ed. 124, 5182–5185 (2012).10.1002/ange.201201533 ↗
49. Strover, L. T., Malmström, J., Stubbing, L. A., Brimble, M. A. & Travas-Sejdic, J. Electrochemically-controlled grafting of hydrophilic brushes from conducting polymer substrates. Electrochim. Acta 188, 57–70 (2016).10.1016/j.electacta.2015.11.106 ↗
50. Han, J. et al. Porous nitrogen-doped hollow carbon spheres derived from polyaniline for high performance supercapacitors. J. Mater. Chem. A 2, 5352–5357 (2014).10.1039/C3TA15271E ↗
51. Yan, J. et al. Controlled polymer‐brush growth from microliter volumes using sacrificial‐anode atom‐transfer radical polymerization. Angew. Chem., Int. Ed. 52, 9125–9129 (2013).10.1002/anie.201304449 ↗
52. Masuda, T., Akimoto, A. M., Nagase, K., Okano, T. & Yoshida, R. Artificial cilia as autonomous nanoactuators: Design of a gradient self-oscillating polymer brush with controlled unidirectional motion. Sci. Adv. 2, e1600902 (2016).
53. Yan, J., Li, B., Zhou, F. & Liu, W. Ultraviolet light-induced surface-initiated atom-transfer radical polymerization. ACS Macro Lett. 2, 592–596 (2013).10.1021/mz400237w ↗
54. Sheng, W. et al. Brushing up from “anywhere” under sunlight: A universal surface-initiated polymerization from polydopamine-coated surfaces. Chem. Sci. 6, 2068–2073 (2015).10.1039/C4SC03851G ↗
55. Dyer, D. J. In Surface-Initiated Polymerization I (ed. Jordan, R.) Vol. 197, 47–65 (Springer Berlin Heidelberg, Berlin, Heidelberg, 2006).
56. Feng, J., Haasch, R. T. & Dyer, D. J. Photoinitiated synthesis of mixed polymer brushes of polystyrene and poly(methyl methacrylate). Macromolecules 37, 9525–9537 (2004).10.1021/ma048681w ↗
57. Chang, Y. et al. Development of biocompatible interpenetrating polymer networks containing a sulfobetaine-based polymer and a segmented polyurethane for protein resistance. Biomacromolecules 8, 122–127 (2007).10.1021/bm060739m ↗
58. Tao, D. et al. Bio‐inspired renewable surface‐initiated polymerization from permanently embedded initiators. Angew. Chem., Int. Ed. 55, 4260–4264 (2016).10.1002/anie.201600080 ↗
59. Zhou, X., Liu, X., Xie, Z. & Zheng, Z. 3d-patterned polymer brush surfaces. Nanoscale 3, 4929–4939 (2011).10.1039/c1nr11238d ↗
60. Liu, X., Li, Y. & Zheng, Z. Programming nanostructures of polymer brushes by dip-pen nanodisplacement lithography (dnl). Nanoscale 2, 2614–2618 (2010).10.1039/c0nr00565g ↗
61. Gan, T. et al. Liquid-mediated three-dimensional scanning probe nanosculpting. Small 9, 2851–2856 (2013).10.1002/smll.201300238 ↗
62. Sun, T. et al. Reversible switching between superhydrophilicity and superhydrophobicity. Angew. Chem. 116, 361–364 (2004).10.1002/ange.200352565 ↗
63. Sun, T., Feng, L., Gao, X. & Jiang, L. Bioinspired surfaces with special wettability. ACC Chem. Res. 38, 644–652 (2005).10.1021/ar040224c ↗
64. Fu, Q. et al. Reversible control of free energy and topography of nanostructured surfaces. J. Am. Chem. Soc. 126, 8904–8905 (2004).10.1021/ja047895q ↗
65. Hongliang, L., Xiqi, Z., Shutao, W. & Lei, J. Underwater thermoresponsive surface with switchable oil‐wettability between superoleophobicity and superoleophilicity. Small 11, 3338–3342 (2015).10.1002/smll.201403190 ↗
66. Du, T., Ma, S., Pei, X., Wang, S. & Zhou, F. Bio‐inspired design and fabrication of micro/nano‐brush dual structural surfaces for switchable oil adhesion and antifouling. Small 13, 1602020 (2017).10.1002/smll.201602020 ↗
67. Samanta, S. & Locklin, J. Formation of photochromic spiropyran polymer brushes via surface-initiated, ring-opening metathesis polymerization: Reversible photocontrol of wetting behavior and solvent dependent morphology changes. Langmuir 24, 9558–9565 (2008).10.1021/la8017387 ↗
68. Fries, K., Samanta, S., Orski, S. & Locklin, J. Reversible colorimetric ion sensors based on surface initiated polymerization of photochromic polymers. Chem. Commun. 21, 6288–6290 (2008).10.1039/b818042c ↗
69. Zhao, B., Haasch, R. T. & MacLaren, S. Solvent-induced self-assembly of mixed poly (methyl methacrylate)/polystyrene brushes on planar silica substrates: Molecular weight effect. J. Am. Chem. Soc. 126, 6124–6134 (2004).10.1021/ja049570f ↗
70. Guo, Y. & Moffitt, M. G. Semiconductor quantum dots with environmentally responsive mixed polystyrene/poly (methyl methacrylate) brush layers. Macromolecules 40, 5868–5878 (2007).10.1021/ma070855x ↗
71. Vyas, M. K., Schneider, K., Nandan, B. & Stamm, M. Switching of friction by binary polymer brushes. Soft Matter 4, 1024–1032 (2008).10.1039/b801110a ↗
72. Yu, K., Wang, H. & Han, Y. Motion of integrated cds nanoparticles by phase separation of block copolymer brushes. Langmuir 23, 8957–8964 (2007).10.1021/la701053d ↗
73. Ionov, L., Houbenov, N., Sidorenko, A., Stamm, M. & Minko, S. Smart microfluidic channels. Adv. Funct. Mater. 16, 1153–1160 (2006).10.1002/adfm.200500562 ↗
74. Sanjuan, S., Perrin, P., Pantoustier, N. & Tran, Y. Synthesis and swelling behavior of ph-responsive polybase brushes. Langmuir 23, 5769–5778 (2007).10.1021/la063450z ↗
75. Treat, N. D., Ayres, N., Boyes, S. G. & Brittain, W. J. A facile route to poly (acrylic acid) brushes using atom transfer radical polymerization. Macromolecules 39, 26–29 (2006).10.1021/ma052001n ↗
76. Zhou, F. & Huck, W. T. Three-stage switching of surface wetting using phosphate-bearing polymer brushes. Chem. Commun. 28, 5999–6001 (2005).10.1039/b512106j ↗
77. Dunderdale, G. J., Urata, C., Miranda, D. F. & Hozumi, A. Large-scale and environmentally friendly synthesis of ph-responsive oil-repellent polymer brush surfaces under ambient conditions. ACS Appl. Mater. Interfaces 6, 11864–11868 (2014).10.1021/am503931j ↗
78. Zhang, L., Zhang, Z. & Wang, P. Smart surfaces with switchable superoleophilicity and superoleophobicity in aqueous media: Toward controllable oil/water separation. NPG Asia Mater. 4, e8 (2012).10.1038/am.2012.14 ↗
79. Xia, F. et al. Dual‐responsive surfaces that switch between superhydrophilicity and superhydrophobicity. Adv. Mater. 18, 432–436 (2006).10.1002/adma.200501772 ↗
80. Xia, F. et al. Multiresponsive surfaces change between superhydrophilicity and superhydrophobicity. Adv. Mater. 19, 2520–2524 (2007).10.1002/adma.200602334 ↗
81. Ng, S. W., Noor, N. & Zheng, Z. Graphene-based two-dimensional janus materials. NPG Asia Mater. 10, 217–237 (2018).10.1038/s41427-018-0023-8 ↗
82. Gao, T. et al. Transferable, transparent and functional polymer@graphene 2d objects. NPG Asia Mater. 6, e130 (2014).
83. Yao, X. et al. Superhydrophobic diffusion barriers for hydrogels via confined interfacial modification. Adv. Mater. 28, 7383–7389 (2016).10.1002/adma.201601568 ↗
84. Chen, L. et al. Integration of hydrogels with functional nanoparticles using hydrophobic comb-like polymers as an adhesive layer. J. Mater. Chem. A 6, 15147–15153 (2018).10.1039/C8TA02970A ↗
85. Chen, L., Yin, Y. A., Liu, Y. X., Lin, L. & Liu, M. J. Design and fabrication of functional hydrogels through interfacial engineering. Chinese J. Polym. Sci. 35, 1181–1193 (2017).10.1007/s10118-017-1995-5 ↗
86. Zhu, Y. & Granick, S. Apparent slip of newtonian fluids past adsorbed polymer layers. Macromolecules 35, 4658–4663 (2002).10.1021/ma020043v ↗
87. Bhushan, B. & Jung, Y. C. Natural and biomimetic artificial surfaces for superhydrophobicity, self-cleaning, low adhesion, and drag reduction. Prog. Mater. Sci. 56, 1–108 (2011).10.1016/j.pmatsci.2010.04.003 ↗
88. Daniello, R. J., Waterhouse, N. E. & Rothstein, J. P. Drag reduction in turbulent flows over superhydrophobic surfaces. Phys. Fluids 21, 085103 (2009).10.1063/1.3207885 ↗
89. Lee, C. & Kim, C. -J. Underwater restoration and retention of gases on superhydrophobic surfaces for drag reduction. Phys. Rev. Lett. 106, 014502 (2011).10.1103/PhysRevLett.106.014502 ↗
90. Wu, Y. et al. Slip flow of diverse liquids on robust superomniphobic surfaces. J. Colloid Interf. Sci. 414, 9–13 (2014).10.1016/j.jcis.2013.09.041 ↗
91. Wu, Y. et al. Adhesion-regulated switchable fluid slippage on superhydrophobic surfaces. J. Phys. Chem. C 118, 2564–2569 (2014).10.1021/jp411083g ↗
92. Wu, Y. et al. Photoresponsive superhydrophobic coating for regulating boundary slippage. Soft Matter 10, 5318–5324 (2014).10.1039/C4SM00799A ↗
93. Wu, Y. et al. Switching fluid slippage on ph-responsive superhydrophobic surfaces. Langmuir 30, 6463–6468 (2014).10.1021/la500999k ↗
94. Wang, X. et al. I3dp, a robust 3d printing approach enabling genetic post-printing surface modification. Chem. Commun. 49, 10064–10066 (2013).10.1039/c3cc45817b ↗
95. Xiao, D., Zhang, H. & Wirth, M. Chemical modification of the surface of poly (dimethylsiloxane) by atom-transfer radical polymerization of acrylamide. Langmuir 18, 9971–9976 (2002).10.1021/la0205553 ↗
96. Huber, D. L., Manginell, R. P., Samara, M. A., Kim, B.-I. & Bunker, B. C. Programmed adsorption and release of proteins in a microfluidic device. Science 301, 352–354 (2003).10.1126/science.1080759 ↗
97. Hou, X., Zhang, H. & Jiang, L. Building bio‐inspired artificial functional nanochannels: From symmetric to asymmetric modification. Angew. Chem., Int. Ed. 51, 5296–5307 (2012).10.1002/anie.201104904 ↗
98. Myshkin, N. K., Petrokovets, M. I. & Kovalev, A. V. Tribology of polymers: Adhesion, friction, wear, and mass-transfer. Tribol. Int. 38, 910–921 (2005).10.1016/j.triboint.2005.07.016 ↗
99. Myshkin, N. K. & Kovalev, A. V. In Polymer Tribology, 3–37 (Imperial College Press, London 2009).10.1142/9781848162044_0001 ↗
100. Schmidt, T. A., Gastelum, N. S., Nguyen, Q. T., Schumacher, B. L. & SahA, R. L. Boundary lubrication of articular cartilage: Role of synovial fluid constituents. Arthritis Rheum. 56, 882–891 (2007).10.1002/art.22446 ↗