Influence of the hybrid effect on the mechanical properties of pulp molds
Source abstract
Abstract
Abstract Recently, pulp mold material has emerged as an eco-friendly substitute for plastic due to its natural and recyclable properties. To investigate hybrid effect on pulp mold materials, wood, sugarcane and hybrid pulp (wood: sugarcane=1:1) were used to make boxes. The results of mechanical tests revealed that tensile index, stiffness, bursting index, and static compressive ultimate load of hybrid pulp mold materials are better than those of wood or sugarcane pulp mold materials. It was speculated that the failure mode observed in wood and sugarcane pulp mold boxes was delamination caused by interfacial instability. The eigenvalues, loads, and stresses corresponding to each buckling mode were obtained via buckling simulation analysis. To verify the hybrid mechanism, scanning electron microscope was exploited to distinguish the morphological differences of different fibers. Ultimately, a novel hybrid reinforcement mechanism in pulp mold material was proposed that hybrid effect reinforced the stability of the interface, which impacted the mechanical properties of hybrid pulp mold materials. This study advances the exploration of hybrid effect of interfaces, and the mechanism of interfacial instability and reinforcement can be implied to other pulp mold products.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Advanced Cellulose Research Studies · Lignin and Wood Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
66374 Jiangsu Provincial Key Laboratory of Food Advanced Manufacturing Equipment Technology, School of Mechanical Engineering, Jiangnan University , No. 1800, Lihu Avenue , Wuxi , 214122 , Jiangsu , PR China
College of Materials Science and Engineering, Jiangsu Collaborative Innovation Centre for Advanced Inorganic Function Composites, Nanjing Tech University, 30 South Puzhu Road , Nanjing 211816 , PR China
Funding
Jiangsu Provincial Key Laboratory of Food Advanced Manufacturing Equipment Technology
References (42)
Show source-provided references
1. An, X., Liu, J., Liu, L., Zhang, H., Nie, S., Cao, H., Xu, Q., and Liu, H. (2020). Improving the flexibility of bamboo mechanical pulp fibers for production of high soft tissue handsheets. Industrial crops and products 150: 112410, https://doi.org/10.1016/j.indcrop.2020.112410.10.1016/j.indcrop.2020.112410 ↗
2. Ansari, F., Lindh, E.L., Furo, I., Johansson, M.K., and Berglund, L.A. (2016). Interface tailoring through covalent hydroxyl-epoxy bonds improves hygromechanical stability in nanocellulose materials. Compos. Sci. Technol. 134: 175–183, https://doi.org/10.1016/j.compscitech.2016.08.002.10.1016/j.compscitech.2016.08.002 ↗
3. Awal, A., Rana, M., and Sain, M. (2015). Thermorheological and mechanical properties of cellulose reinforced PLA bio-composites. Mechanics of Materials 80: 87–95, https://doi.org/10.1016/j.mechmat.2014.09.009.10.1016/j.mechmat.2014.09.009 ↗
4. Boyaci, D., Onarinde, B., Aiyedun, S., Waldron, K.W., May, D., and Tucker, N. (2022). The beneficial effects of the addition of pulped agaricus bisporus mushroom body co-product to kraft pulp packaging materials. Cleaner Materials 3: 100049, https://doi.org/10.1016/j.clema.2022.100049.10.1016/j.clema.2022.100049 ↗
5. Chaiwong, S., Saengrayap, R., Rattanakaran, J., Chaithanarueang, A., Arwatchananukul, S., Aunsri, N., Tontiwattanakul, K., Jitkokkruad, K., Kitazawa, H., and Trongsatitkul, T. et al.. (2023). Natural rubber latex cushioning packaging to reduce vibration damage in guava during simulated transportation. Postharvest Biology and Technology 199: 112273, https://doi.org/10.1016/j.postharvbio.2023.112273.10.1016/j.postharvbio.2023.112273 ↗
6. Cheng, Z., Li, X., Lv, J., Liu, Y., and Liu, X. (2021). Constructing a new tear-resistant skin for aramid fiber to enhance composites interfacial performance based on the interfacial shear stability. Appl. Surf. Sci. 544: 148935, https://doi.org/10.1016/j.apsusc.2021.148935.10.1016/j.apsusc.2021.148935 ↗
7. Cheryala, S.B. and Yerramalli, C.S. (2022). The role of fiber distribution on the in-situ resin behavior in the hybrid polymer composites. Mechanics of Materials 173: 104446, https://doi.org/10.1016/j.mechmat.2022.104446.10.1016/j.mechmat.2022.104446 ↗
8. Coimbra, M.A., Barros, A., Rutledge, D.N., and Delgadillo, I. (1999). FTIR spectroscopy as a tool for the analysis of olive pulp cell-wall polysaccharide extracts. Carbohydr. Res. 317: 145–154, https://doi.org/10.1016/s0008-6215(99)00071-3.10.1016/S0008-6215(99)00071-3 ↗
9. Das, S., Sobuz, M.H.R., Tam, V.W., Akid, A.S.M., Sutan, N.M., and Rahman, F.M. (2020). Effects of incorporating hybrid fibres on rheological and mechanical properties of fibre reinforced concrete. Constr. Build. Mater. 262: 120561, https://doi.org/10.1016/j.conbuildmat.2020.120561.10.1016/j.conbuildmat.2020.120561 ↗
10. Debnath, M., Sarder, R., Pal, L., and Hubbe, M.A. (2022). Molded pulp products for sustainable packaging: production rate challenges and product opportunities. BioResources 17: 3810–3870, https://doi.org/10.15376/biores.17.2.debnath.10.15376/biores.17.2.Debnath ↗
11. Dehne, L., Babarro, C.V., Saake, B., and Schwarz, K.U. (2016). Influence of lignin source and esterification on properties of lignin-polyethylene blends. Industrial crops and products 86: 320–328, https://doi.org/10.1016/j.indcrop.2016.04.005.10.1016/j.indcrop.2016.04.005 ↗
12. Desnoes, E., Deshaies, P., Bideau, B., and Rubiano, J. (2024). Thermoformed products from high-density polyethylene and softwood kraft pulp. Nord. Pulp Pap. Res. J. 39: 339–348, https://doi.org/10.1515/npprj-2023-0067.10.1515/npprj-2023-0067 ↗
13. Ge, G., Liu, J., Liao, Y., Zeng, D., Mou, H., and Fan, H. (2024). Effects of surfactants on the wettability of sodium propionate aqueous deacidification agent. Nord. Pulp Pap. Res. J. 39: 645–654, https://doi.org/10.1515/npprj-2023-0038.10.1515/npprj-2023-0038 ↗
14. Godinho, P.M.J., Jajcinovic, M., Wagner, L., Vass, V., Fischer, W.J., Bader, T.K., Hirn, U., Bauer, W., Eberhardsteiner, J., and Hellmich, C. (2019). A continuum micromechanics approach to the elasticity and strength of planar fiber networks: theory and application to paper sheets. European Journal of Mechanics-A/Solids 75: 516–531, https://doi.org/10.1016/j.euromechsol.2018.10.005.10.1016/j.euromechsol.2018.10.005 ↗
15. Gonçalves, A.R., Esposito, E., and Benar, P. (1998). Evaluation of panus tigrinus in the delignification of sugarcane bagasse by FTIR-PCA and pulp properties. Journal of biotechnology 66: 177–185, https://doi.org/10.1016/s0168-1656(98)00147-3.10.1016/S0168-1656(98)00147-3 ↗
16. Harikrishnan, M., Thampi, A., Lal, A.N., Warrier, A.S., Basil, M., and Kothakota, A. (2023). Effect of chitosan-based bio coating on mechanical, structural and physical characteristics of microfiber based paper packaging: an alternative to wood pulp/plastic packaging. Int. J. Biol. Macromol. 253: 126888, https://doi.org/10.1016/j.ijbiomac.2023.126888.10.1016/j.ijbiomac.2023.126888 ↗
17. Hu, J., Wang, P., Xue, J., Han, R., Xu, T., Hong, Y., and Yang, Y. (2023). The influence of hybrid effect on mechanical properties and acoustic performance of hybrid fiber wet-laid felts. Cellulose 30: 5519–5533, https://doi.org/10.1007/s10570-023-05216-6.10.1007/s10570-023-05216-6 ↗
18. Joffre, T., Miettinen, A., Wernersson, E.L., Isaksson, P., and Gamstedt, E.K. (2014). Effects of defects on the tensile strength of short-fibre composite materials. Mechanics of Materials 75: 125–134, https://doi.org/10.1016/j.mechmat.2014.04.003.10.1016/j.mechmat.2014.04.003 ↗
19. Kopparthy, S.D.S. and Netravali, A.N. (2021). Green composites for structural applications. Composites Part C: Open Access 6: 100169, https://doi.org/10.1016/j.jcomc.2021.100169.10.1016/j.jcomc.2021.100169 ↗
20. Li, M. (2023). Study on waterproof pulp molding products manufactured by wet-parison spraying process, Vol. 2539, pp. 012077, https://doi.org/10.1088/1742-6596/2539/1/012077.J. Phys.: Conf. Ser.10.1088/1742-6596/2539/1/012077 ↗
21. Liu, C., Luan, P., Li, Q., Cheng, Z., Sun, X., Cao, D., and Zhu, H. (2020). Biodegradable, hygienic, and compostable tableware from hybrid sugarcane and bamboo fibers as plastic alternative. Matter 3: 2066–2079, https://doi.org/10.1016/j.matt.2020.10.004.10.1016/j.matt.2020.10.004 ↗
22. Liu, S., Gao, Y., Ma, L., Wu, R., and Lu, P. (2023). Plant fiber foam reinforced with distiller’s grains and its static cushioning properties. Industrial crops and products 206: 117658, https://doi.org/10.1016/j.indcrop.2023.117658.10.1016/j.indcrop.2023.117658 ↗
23. Ma, R., Guo, M., and Zhang, X. (2018). Recent advances in oxidative valorization of lignin. Catal. Today 302: 50–60, https://doi.org/10.1016/j.cattod.2017.05.101.10.1016/j.cattod.2017.05.101 ↗
24. La Mantia, F. and Morreale, M. (2011). Green composites: a brief review. Composites Part A: Applied Science and Manufacturing 42: 579–588, https://doi.org/10.1016/j.compositesa.2011.01.017.10.1016/j.compositesa.2011.01.017 ↗
25. Marin, G., Srinivasa, P., Nygårds, M., and Östlund, S. (2021). Experimental and finite element simulated box compression tests on paperboard packages at different moisture levels. Packaging Technology and Science 34: 229–243, https://doi.org/10.1002/pts.2554.10.1002/pts.2554 ↗
26. Naraganti, S.R., Pannem, R.M.R., and Putta, J. (2019). Impact resistance of hybrid fibre reinforced concrete containing sisal fibres. Ain shams engineering journal 10: 297–305, https://doi.org/10.1016/j.asej.2018.12.004.10.1016/j.asej.2018.12.004 ↗
27. Negro, C., Pettersson, G., Mattsson, A., Nyström, S., Sanchez-Salvador, J.L., Blanco, A., and Engstrand, P. (2023). Synergies between fibrillated nanocellulose and hot-pressing of papers obtained from high-yield pulp. Nanomaterials 13: 1931, https://doi.org/10.3390/nano13131931.10.3390/nano13131931 ↗
28. Ngiwngam, K., Chinvorarat, S., Rachtanapun, P., Auras, R., Wittaya, T., and Tongdeesoontorn, W. (2023). Effect of chemical and steam explosion pulping on the physical and mechanical properties of sugarcane straw pulp trays. Polymers 15: 3132, https://doi.org/10.3390/polym15143132.10.3390/polym15143132 ↗
29. Oliveira, M., Pickering, K.L., and Gauss, C. (2022). Hybrid polyethylene composites with recycled carbon fibres and hemp fibres produced by rotational moulding. Journal of Composites Science 6: 352, https://doi.org/10.3390/jcs6110352.10.3390/jcs6110352 ↗
30. Ou, J., Yang, R., Dai, Z., Kong, Z., Shu, H., and Huang, X. (2022). Synthesis, characterization, application of PET waste blended with hybrid fibers and preparation of fiber derived unsaturated resin. Polymer Science, Series A 64: 818–833, https://doi.org/10.1134/s0965545x22700602.10.1134/S0965545X22700602 ↗
31. Qin, C., Li, J., Wang, W., and Li, W. (2022). Improving mechanical strength and water barrier properties of pulp molded product by wet-end added polyamide epichlorohydrin/cationic starch. ACS omega 7: 22173–22180, https://doi.org/10.1021/acsomega.1c07369.10.1021/acsomega.1c07369 ↗
32. Ratha, P., Chaurasiya, D., and Kaul, G. (2020). Can plastics be ever replaced in the dairy industry? Curr. Sci. 119: 1411–1416, https://doi.org/10.18520/cs/v119/i9/1411-1416.10.18520/cs/v119/i9/1411-1416 ↗
33. Romanenko, V., Duhovic, M., Schommer, D., Hausmann, J., and Eschl, J. (2022). Advanced process simulation of compression molded carbon fiber sheet molding compound (C-SMC) parts in automotive series applications. Composites Part A: Applied Science and Manufacturing 157: 106924, https://doi.org/10.1016/j.compositesa.2022.106924.10.1016/j.compositesa.2022.106924 ↗
34. Semple, K.E., Zhou, C., Rojas, O.J., Nkeuwa, W.N., and Dai, C. (2022). Moulded pulp fibers for disposable food packaging: a state-of-the-art review. Food Packaging and Shelf Life 33: 100908, https://doi.org/10.1016/j.fpsl.2022.100908.10.1016/j.fpsl.2022.100908 ↗
35. Senghor, M.N., Bassama, J., Ly, E.B., Mora, F., and Galaffu, N. (2024). Typha domingensis and phragmites australis as alternative and sustainable pulp materials for primary paper based packaging. Bioresour. Technol. Rep. 25: 101712, https://doi.org/10.1016/j.biteb.2023.101712.10.1016/j.biteb.2023.101712 ↗
36. Singh, A.K., Itkor, P., Lee, M., Shin, J., and Lee, Y.S. (2023). Promoting sustainable packaging applications in the circular economy by exploring and advancing molded pulp materials for food products: a review. Critical Reviews in Food Science and Nutrition 63: 11010–11025, https://doi.org/10.1080/10408398.2022.2088686.10.1080/10408398.2022.2088686 ↗
37. Singha, P., Rani, R., and Badwaik, L.S. (2023). Influence of sugarcane bagasse fibre on the properties of sweet lime peel-and polyvinyl alcohol-based biodegradable films. Sustainable Food Technology 1: 610–620, https://doi.org/10.1039/d3fb00052d.10.1039/D3FB00052D ↗
38. Tojaga, V., Kulachenko, A., Östlund, S., and Gasser, T.C. (2021). Modeling multi-fracturing fibers in fiber networks using elastoplastic timoshenko beam finite elements with embedded strong discontinuities—formulation and staggered algorithm. Computer methods in applied mechanics and engineering 384: 113964, https://doi.org/10.1016/j.cma.2021.113964.10.1016/j.cma.2021.113964 ↗
39. Unlu, O. and Aytac, A. (2024). Effects of xylan-modified precipitated calcium carbonate filler on the properties of paper. Nord. Pulp Pap. Res. J. 39: 601–616, https://doi.org/10.1515/npprj-2024-0042.10.1515/npprj-2024-0042 ↗
40. Wohlert, M., Benselfelt, T., Wågberg, L., Furó, I., Berglund, L.A., and Wohlert, J. (2022). Cellulose and the role of hydrogen bonds: not in charge of everything. Cellulose 29: 1–23, https://doi.org/10.1007/s10570-021-04325-4.10.1007/s10570-021-04325-4 ↗
41. Zhang, Y., Duan, C., Bokka, S.K., He, Z., and Ni, Y. (2022). Molded fiber and pulp products as green and sustainable alternatives to plastics: a mini review. Journal of Bioresources and Bioproducts 7: 14–25, https://doi.org/10.1016/j.jobab.2021.10.003.10.1016/j.jobab.2021.10.003 ↗
42. Zhu, H., Han, Z., Cheng, J.-H., and Sun, D.-W. (2022). Modification of cellulose from sugarcane (Saccharum officinarum) bagasse pulp by cold plasma: dissolution, structure and surface chemistry analysis. Food chemistry 374: 131675, https://doi.org/10.1016/j.foodchem.2021.131675.10.1016/j.foodchem.2021.131675 ↗