Study on the properties of ground film paper prepared from lactic acid-modified cellulose
Source abstract
Abstract
Abstract Lactic acid impregnated ground film paper was prepared using the method of lactic acid impregnation of raw paper. The physical properties, chemical composition, crystallinity, thermal stability, surface morphology of the paper, barrier properties, and light transmittance of the lactic acid paper were investigated using FT-IR, XRD, TGA, SEM, water vapor blocking, oxygen blocking, mechanical properties testing, and optical property testing. Results showed that at room temperature (20 °C), when lactic acid concentration was 100 %, reaction time was 48 h, and 100 °C high temperature drying prepared lactic acid paper, it exhibited superior performance: dry strength of 2.83 IkN/m, wet strength of 0.36 kN/m, Cobb value of 4.50 g/m2, tear of 359.42 mN, water vapor barrier of 693.46 g m−2 24 h−1, and oxygen barrier of 933.43 cm3 m−2 24 h−1. Degradation rate reached 22.94 % after two weeks of soil landfill.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Lignin and Wood Chemistry · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Pulp and Paper Science and Technology of Ministry of Education , Qilu University of Technology (Shandong Academy of Sciences) , Jinan , Shandong , 250353 , China
66280 Qingdao University of Science and Technology , Qingdao , Shandong , 266042 , China
Funding
Foundation of State Key Laboratory of Biobased Material and Green Papermaking · NationalNatural Science Foundation of China · Qilu University of Technology the Youth Innovative Team Development Plan of Colleges and Universities in Shandong Province · Qilu University of Technology; Major innovation project of Qingdao West Coast · Shandong Province Major Innovation Project · Key laboratory of pulp and paper science and technology of Ministry of Education
References (20)
Show source-provided references
1. Archaviboonyobul, T., Jinkarn, T., Sane, S., Chariyachotilert, S., and Kongcharoenkiat, S. (2014). Water resistance and barrier properties improvement of paperboard by poly(lactic acid) electrospraying. Packag. Technol. Sci. 27: 341–352, https://doi.org/10.1002/pts.2034.10.1002/pts.2034 ↗
2. Cao, Y.Y., Chen, D.D., Meng, Y., Saravanamurugan, S., and Li, H. (2021). Visible-light-driven prompt and quantitative production of lactic acid from biomass sugars over a N-TiO2 photothermal catalyst. Green Chem. 23: 10039–10049, https://doi.org/10.1039/d1gc03057d.10.1039/D1GC03057D ↗
3. Cortea, I.M., Ghervase, L., Ratoiu, L., and Radvan, R. (2020). Application of spectroscopic and hyperspectral imaging techniques for rapid and nondestructive investigation of Jewish Ritual parchment. Front. Mater. 7, https://doi.org/10.3389/fmats.2020.601339.10.3389/fmats.2020.601339 ↗
4. Domenek, S., Fernandes-Nassar, S., and Ducruet, V. (2018). Rheology, mechanical properties, and barrier properties of poly(lactic acid). In: DiLorenzo, M.L. and Androsch, R. (Eds.). Synthesis, structure and properties of poly(lactic acid). Frontiers Media SA, Lausanne.10.1007/12_2016_17 ↗
5. Dou, X.Y., Li, Q., Wu, Q.X., Duan, L.S., Zhou, S.Y., and Zhang, Y. (2020). Effects of lactic acid and mixed acid aqueous solutions on the preparation, structure and properties of thermoplastic chitosan. Eur. Polym. J. 134: 109850, https://doi.org/10.1016/j.eurpolymj.2020.109850.10.1016/j.eurpolymj.2020.109850 ↗
6. Gotvajn, A.Z. and Kalcíková, G. (2018). Delamination of plastic-coated waste paper by enzymes of the white rot fungus Dichomitus squalens. J. Environ. Manage. 228: 165–168, https://doi.org/10.1016/j.jenvman.2018.08.111.10.1016/j.jenvman.2018.08.111 ↗
7. Guo, Z.Y., Zhou, P., Jiang, L.Q., Liu, S.Q., Yang, Y., Li, Z.Y., Wu, P.D., Zhang, Z.H., and Li, H. (2024). Electron localization-triggered proton pumping toward Cu single atoms for electrochemical CO2 methanation of unprecedented selectivity. Adv. Mater. 36: e2311149, https://doi.org/10.1002/adma.202311149.10.1002/adma.202311149 ↗
8. Jang, M., Yang, H., Park, S.A., Sung, H.K., Koo, J.M., Hwang, S.Y., Jeon, H., Oh, D.X., and Park, J. (2022). Analysis of volatile organic compounds produced during incineration of non-degradable and biodegradable plastics. Chemosphere 303: 134946, https://doi.org/10.1016/j.chemosphere.2022.134946.10.1016/j.chemosphere.2022.134946 ↗
9. Jin, T.Z., Wang, Y.J., Yao, S., Hu, C.X., Ma, T., and Xia, W.J. (2023). Bioconversion of carbon dioxide to succinate by Citrobacter. Chem. Eng. J. 452: 139668, https://doi.org/10.1016/j.cej.2022.139668.10.1016/j.cej.2022.139668 ↗
10. Lee, G., Lee, H.M., and Kim, Y.H. (2019). Thermal and mechanical properties of poly(l-lactic acid) films plasticized with propylene carbonate. Polymer 43: 113–122, https://doi.org/10.7317/pk.2019.43.1.113.10.7317/pk.2019.43.1.113 ↗
11. Liu, T., Jiang, P.P., Liu, H.L., Li, M.T., Dong, Y.M., Wang, R.M., and Wang, Y.J. (2017). Performance testing of a green plasticizer based on lactic acid for PVC. Polym. Test. 61: 205–213, https://doi.org/10.1016/j.polymertesting.2017.05.012.10.1016/j.polymertesting.2017.05.012 ↗
12. Liu, Z.R., Hu, Y.W., Dong, R.M., Zhang, S.H., Li, H., and Chen, R. (2024). Synthesis and characterization of novel water hyacinth (Eichhornia crassipes) biodegradable mulch films. Ind. Crops Prod. 222: 119548, https://doi.org/10.1016/j.indcrop.2024.119548.10.1016/j.indcrop.2024.119548 ↗
13. Regmi, U., Palma, M., and Barroso, C.G. (2012). Direct determination of organic acids in wine and wine-derived products by Fourier transform infrared (FT-IR) spectroscopy and chemometric techniques. Anal. Chim. Acta 732: 137–144, https://doi.org/10.1016/j.aca.2011.11.009.10.1016/j.aca.2011.11.009 ↗
14. Sebestyén, Z., Czégény, Z., Badea, E., Carsote, C., Sendrea, C., Barta-Rajnai, E., Bozi, J., Miu, L., and Jakab, E. (2015). Thermal characterization of new, artificially aged and historical leather and parchment. J. Anal. Appl. Pyrolysis 115: 419–427, https://doi.org/10.1016/j.jaap.2015.08.022.10.1016/j.jaap.2015.08.022 ↗
15. Sundar, N., Ananda Kumar, S., Pavithra, A., and Ghosh, S. (2020). Studies on semi-crystalline poly lactic acid (PLA) as a hydrophobic coating material on Kraft paper for imparting barrier properties in coated abrasive applications. Prog. Org. Coat. 145: 105682, https://doi.org/10.1016/j.porgcoat.2020.105682.10.1016/j.porgcoat.2020.105682 ↗
16. Tsai, C.C., Wu, R.J., Cheng, H.Y., Li, S.C., Siao, Y.Y., Kong, D.C., and Jang, G.W. (2010). Crystallinity and dimensional stability of biaxial oriented poly(lactic acid) films. Polym. Degrad. Stab. 95: 1292–1298, https://doi.org/10.1016/j.polymdegradstab.2010.02.032.10.1016/j.polymdegradstab.2010.02.032 ↗
17. Wang, S.W., Chen, K.Y., and Wang, Q.B. (2018). Ytterbium triflate immobilized on sulfo-functionalized SBA-15 catalyzed conversion of cellulose to lactic acid. J. Porous Mater. 25: 1531–1539, https://doi.org/10.1007/s10934-018-0566-7.10.1007/s10934-018-0566-7 ↗
18. Wu, X.Q., Song, X.M., Cao, Z.Y., Ma, Y., Sun, Y.F., Chen, F.S., and Gao, S.S. (2024). Modification of polyvinyl alcohol with 2-hydroxypropionic acid and cross-linking with glutaraldehyde for the preparation of biodegradable mulch paper and its properties. Nord. Pulp Pap. Res. J. 39: 213–227, https://doi.org/10.1515/npprj-2024-0014.10.1515/npprj-2024-0014 ↗
19. Zhao, Y.Q., Cheung, H.Y., Lau, K.T., Xu, C.L., Zhao, D.D., and Li, H.L. (2010). Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties. Polym. Degrad. Stab. 95: 1978–1987, https://doi.org/10.1016/j.polymdegradstab.2010.07.015.10.1016/j.polymdegradstab.2010.07.015 ↗
20. Zou, H.T., Yi, C.H., Wang, L.X., Liu, H.T., and Xu, W.L. (2009). Thermal degradation of poly(lactic acid) measured by thermogravimetry coupled to Fourier transform infrared spectroscopy. J. Therm. Anal. Calorim. 97: 929–935, https://doi.org/10.1007/s10973-009-0121-5.10.1007/s10973-009-0121-5 ↗