Comparison of fibers obtained from industrial corncob residue by two delignification methods and their application in papermaking
Source abstract
Abstract
Abstract In this study, two methods were used to extract fibers from industrial corncob residue. The extracted fibers were compared with different characterization methods such as Zeta potential, FAS-VII fiber analysis system, GPC and XRD. The average length and width of the fibers treated by NaOH/H2O2 were 80 µm and 10 µm. The molecular weight was 17653, and the crystallinity was 49.9 %. Correspondingly, the average length and width of fibers treated with CH3COOH/NaClO2 were 100 μm and 10 µm. The molecular weight was 18810, and the crystallinity was 61.9 %. Then, they were modified to prepare carboxymethyl cellulose, which was used to improve the physical properties of paper, the result indicated that both of the carboxymethyl cellulose had good effect. Under optimal experimental conditions, the folding endurance, tensile index, burst index of the handsheets were increased by 37.38 %, 28.78 %, and 28.8 %, respectively. SEM results showed that the addition of carboxymethyl cellulose made the fibers stick closely, which improving the paper properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Material Properties and Processing · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Beijing Key Laboratory of Lignocellulosic Chemistry , 12380 Beijing Forestry University , Beijing , , China
MOE Engineering Research Center of Forestry Biomass Materials and Bioenergy , 12380 Beijing Forestry University , Beijing , , China
Funding
Ministry of Science and Technology of the People’s Republic of China
References (27)
Show source-provided references
1. Ampaiwong, J., Rattanawaleedirojn, P., Saengkiettiyut, K., Rodthongkum, N., Potiyaraj, P., Soatthiyanon, N. (2019) Reduced graphene oxide/carboxymethyl cellulose nanocomposites: novel conductive films. J. Nanosci. Nanotechnol. 19(6):3544–3550. 10.1166/jnn.2019.16120.10.1166/jnn.2019.16120 ↗
2. Anikushin, B., Lagutin, P. Kanbetova, A., Novikov, A., Vinokurov, V. (2022) Zeta potential of nanosized particles of cellulose as a function of pH. Chem. Technol. Fuels Oils 57(6):913–916. 10.1007/s10553-022-01328-0.10.1007/s10553-022-01328-0 ↗
3. Bampidis, V., Azimonti, G., Bastos, M., Christensen, H., Dusemund, B., Durjava, M., Kouba, M., Lopez-Alonso, M., Puente, S., Marcon, F., Mayo, B., Pechova, A., Petkova, M., Ramos, F., Sanz, Y., Villa, R., Woutersen, R., Bories, G., Gropp, J., Nebbia, C., Innocenti, M., Aquilina, G., Subst, E. (2020) Safety and efficacy of sodium carboxymethyl cellulose for all animal species. EFSA J. 18(7):13. 10.2903/j.efsa.2020.6211.10.2903/j.efsa.2020.6211 ↗
4. Bi, S., Liu, W., Wang, C., Zhan, H. (2018) A versatile approach to the synthesis of biomass derived from furfural residues as a potential adsorbent. J. Environ. Chem. Eng. 6(4):5049–5052. 10.1016/j.jece.2018.07.038.10.1016/j.jece.2018.07.038 ↗
5. Deng, A., Lin, Q., Yan, Y., Li, H., Ren, J., Liu, C., Sun, R. (2016) A feasible process for furfural production from the pre-hydrolysis liquor of corncob via biochar catalysts in a new biphasic system. Bioresour. Technol. 216:754–760. 10.1016/j.biortech.2016.06.002.10.1016/j.biortech.2016.06.002 ↗
6. El-Sakhawy, M., Salama, A., Kamel, S., Tohamy, H. (2018) Carboxymethyl cellulose esters as stabilizers for hydrophobic drugs in aqueous medium. Cellul. Chem. Technol. 52(9-10):749–757.
7. Gibis, M., Schuh, V., Allard, K., Weiss, J. (2017) Influence of molecular weight and degree of substitution of various carboxymethyl celluloses on unheated and heated emulsion-type sausage models. Carbohydr. Polym. 159:76–85. 10.1016/j.carbpol.2016.12.012.10.1016/j.carbpol.2016.12.012 ↗
8. Gulsoy, S., Erenturk, S. (2017) Improving strength properties of recycled and virgin pulp mixtures with dry strength agents. Starch – Stärke 69(3-4):8. 10.1002/star.201600035.10.1002/star.201600035 ↗
9. He, W., Wang, M., Song, X., Zhao, Q. (2017) Influence of carboxymethylated holocellulose and pae binary system on paper properties. Cellul. Chem. Technol. 51(3-4):313–318.
10. He, W., Yang, T., Wang, Y., Song, X. (2015) Carboxymethylation of corncob holocellulose and its influences on paper properties. J. Wood Chem. Technol. 35(2):137–145. 10.1080/02773813.2014.902963.10.1080/02773813.2014.902963 ↗
11. Hubbe, A. (2006) Bonding between cellulosic fibers in the absence and presence of dry-strength agents – a review. BioResources 1(2):281–318. 10.15376/biores.1.2.281-318.10.15376/biores.1.2.281-318 ↗
12. Igarashi, K., Uchihashi, T., Koivula, A., Wada, M., Kimura, S., Okamoto, T., Penttila, M., Ando, T., Samejima, M. (2011) Traffic jams reduce hydrolytic efficiency of cellulase on cellulose surface. Science 333(6047):1279–1282. 10.1126/science.1208386.10.1126/science.1208386 ↗
13. Juneja, H., Joshi, M., Kanfade, J. (2013) Sythesis and characterization of metallic gel complexes derived from carboxymethyl cellulose. J. Chem. 2013:6. 10.1155/2013/820328.10.1155/2013/820328 ↗
14. Katz, S., Beatson, R., Scallan, A. (1984) The determination of strong and weak acidic groups in sulfite pulps. Sven. Papp.tidn.. 87(6):48–53.
15. Kaur, D., Bhardwaj, N., Lohchab, R. (2017) Prospects of rice straw as a raw material for paper making. Waste Manag. 60:127–139. 10.1016/j.wasman.2016.08.001.10.1016/j.wasman.2016.08.001 ↗
16. Khosravani, A., Rahmaninia, M. (2013) The potential of nanosilica – cationic starch wet end system for applying higher filler content in fine paper. BioResources 8(2):2234–2245. 10.15376/biores.8.2.2234-2245.10.15376/biores.8.2.2234-2245 ↗
17. Levit, M., Allison, L., Bradbury, J., Ragauskas, J. (2013) Improving physical properties of kraft hardwood pulps by copulping with agricultural residues. Ind. Eng. Chem. Res. 52(9):3300–3305. 10.1021/ie303095s.10.1021/ie303095s ↗
18. Li, J., Mei, M., Han, Y., Hong, M., Man, Y. (2020) Life cycle cost assessment of recycled paper manufacture in China. J. Clean. Prod. 252:11. 10.1016/j.jclepro.2019.119868.10.1016/j.jclepro.2019.119868 ↗
19. Liu, C., Li, B., Du, H., Lv, D., Zhang, Y., Yu, G., Mu, X., Peng, H. (2016) Properties of nanocellulose isolated from corncob residue using sulfuric acid, formic acid, oxidative and mechanical methods. Carbohydr. Polym. 151:716–724. 10.1016/j.carbpol.2016.06.025.10.1016/j.carbpol.2016.06.025 ↗
20. Liu, L., Chang, H., Jameel, H., Park, S. (2018) Furfural production from biomass pretreatment hydrolysate using vapor-releasing reactor system. Bioresour. Technol. 252:165–171. 10.1016/j.biortech.2018.01.006.10.1016/j.biortech.2018.01.006 ↗
21. Ren, J., Peng, F., Sun, R. (2009) The effect of hemicellulosic derivatives on the strength properties of old corrugated container pulp fibres. J. Biobased Mater. Bioenergy 3(1):62–68. 10.1166/jbmb.2009.1008.10.1166/jbmb.2009.1008 ↗
22. Samyn, P., Barhoum, A., Ohlund, T., Dufresne, A. (2018) Review: nanoparticles and nanostructured materials in papermaking. J. Mater. Sci. 53(1):146–184. 10.1007/s10853-017-1525-4.10.1007/s10853-017-1525-4 ↗
23. Seo, M., Youn, H., Lee, H. (2020) Penetration control of surface sizing starch using cationic pam and its effect on the bending stiffness of paper. BioResources 15(3):5489–5502. 10.15376/biores.15.3.5489-5502.10.15376/biores.15.3.5489-5502 ↗
24. Strand, A., Khakalo, A., Kouko, J., Oksanen, A., Ketola, A., Salminen, K., Rojas, O., Retulainen, E., Sundberg, A. (2017) The effect of chemical additives on the strength, stiffness and elongation potential of paper. Nord. Pulp Pap. Res. J. 32(3):324–335. 10.3183/NPPRJ-2017-32-03-p324-335.10.3183/npprj-2017-32-03-p324-335 ↗
25. Sun, Y., Wang, Z., Liu, Y., Meng, X., Qu, J., Liu, Y., Qu, B. (2020) A review on the transformation of furfural residue for value-added products. Energies 13(1):19. 10.3390/en13010021.10.3390/en13010021 ↗
26. Wang, K., Jiang, J., Xu, F., Sun, R. (2009) Influence of steaming pressure on steam explosion pretreatment of Lespedeza stalks (Lespedeza crytobotrya): Part 1. Characteristics of degraded cellulose. Polym. Degrad. Stab. 94(9):1379–1388. 10.1016/j.polymdegradstab.2009.05.019.10.1016/j.polymdegradstab.2009.05.019 ↗
27. Wei, X., Lu, Q., Sui, X., Wang, Z., Zhang, Y. (2012) Characterization of the water-insoluble pyrolytic cellulose from cellulose pyrolysis oil. J. Anal. Appl. Pyrolysis 97:49–54. 10.1016/j.jaap.2012.07.002.10.1016/j.jaap.2012.07.002 ↗