Fabrication of modified lignin-based liquid mulching film and its potential application
Source abstract
Abstract
Abstract Liquid mulching film is an emerging film material to replace the traditional plastic film, which causes wide public concern. In this study, a graft copolymer (LS-AA) was synthesized from sodium lignosulfonate (LS) by free radical polymerization, which was added as enhancer to the cationic starch (CS) solutions to obtain the CLA based film. The grafting conditions was optimized by response surface methodology (RSM) for the preparation of LS-AA, after that the LS-AA was characterized by FTIR, XRD, and TG. The highest grafting rate was obtained under the reaction conditions of 80 °C for 2.6 h with the mass ratio of monomer and LS of 5.5/5 at initiator dosage of 1 %. The fabricated liquid mulching film with addition of LS-AA showed outstanding anti-ultraviolet, biodegradation, anti-erosion, which provided theoretical base and practical references for popularizing and application of liquid mulching film in the dust prevention and sand fixation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Lignin and Wood Chemistry · Horticultural and Viticultural Research · Plant Physiology and Cultivation Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Chemistry and Chemical Engineering , 56701 Taishan University , Taian , Shandong 271000 , China
Institute of Chemical Industry of Forest Products , 74640 Chinese Academy of Forestry , Nanjing 210018 , China
Department of Chemistry and Chemical Engineering, MOE Engineering Research Center of Forestry Biomass Materials and Bioenergy , 12380 Beijing Forestry University , Beijing 100083 , China
College of Engineering , 56650 Qufu Normal University , Rizhao , Shandong 276826 , China
Funding
Shandong Provincial Key Research & Development Project · Research Starting Funds for Imported Talents
References (34)
Show source-provided references
1. Baki, M. and Abedi-Koupai, J. (2018). Preparation and characterization of a superabsorbent slow-release fertilizer with sodium alginate and biochar. J. Appl. Polym. Sci. 135: 45966, https://doi.org/10.1002/app.45966.10.1002/app.45966 ↗
2. Bao, Q., Liu, Y., Li, C., Jia, L., Yan, J., Yuan, M., and Zhou, W. (2020). Development and performance characterization of a hybrid dust suppressant based on sodium ligninsulfonate modification. Starch - Stärke 73: 2000207, https://doi.org/10.1002/star.202000207.10.1002/star.202000207 ↗
3. Barisik, G., Isci, A., Kutlu, N., Bagder Elmaci, S., and Akay, B. (2016). Optimization of organic acid pretreatment of wheat straw. Biotechnol. Prog. 32: 1487–1493, https://doi.org/10.1002/btpr.2347.10.1002/btpr.2347 ↗
4. Borrowman, C.K., Johnston, P., Adhikari, R., Saito, K., and Patti, A.F. (2020). Environmental degradation and efficacy of a sprayable, biodegradable polymeric mulch. Polym. Degrad. Stab. 175: 109126, https://doi.org/10.1016/j.polymdegradstab.2020.109126.10.1016/j.polymdegradstab.2020.109126 ↗
5. Chohan, N.A., Aruwajoye, G.S., Sewsynker-Sukai, Y., and Gueguim Kana, E.B. (2020). Valorisation of potato peel wastes for bioethanol production using simultaneous saccharification and fermentation: process optimization and kinetic assessment. Renew. Energy 146: 1031–1040, https://doi.org/10.1016/j.renene.2019.07.042.10.1016/j.renene.2019.07.042 ↗
6. Chung, Y.C., Park, J.E., Choi, J.W., and Chun, B.C. (2018). Synthesis and characterizations of antifungal polyurethanes with enhanced tensile and shape recovery performances. Adv. Polym. Technol. 37: 3392–3400, https://doi.org/10.1002/adv.22123.10.1002/adv.22123 ↗
7. Dang, X., Yuan, H., and Shan, Z. (2018). An eco-friendly material based on graft copolymer of gelatin extracted from leather solid waste for potential application in chemical sand-fixation. J. Clean. Product. 188: 416–424, https://doi.org/10.1016/j.jclepro.2018.04.007.10.1016/j.jclepro.2018.04.007 ↗
8. Dumitriu, R.P., Stoica, I., Vasilescu, D.S., Cazacu, G., and Vasile, C. (2017). Alginate/lignosulfonate blends with photoprotective and antioxidant properties for active packaging applications. J. Polym. Environ. 26: 1100–1112, https://doi.org/10.1007/s10924-017-1018-1.10.1007/s10924-017-1018-1 ↗
9. Franzoso, F., Causone, D., Tabasso, S., Antonioli, D., Montoneri, E., Persico, P., Laus, M., Mendichi, R., and Negre, M. (2015). Films made from polyethylene-co-acrylic acid and soluble biopolymers sourced from agricultural and municipal biowaste. J. Appl. Polym. Sci. 132: 41909, https://doi.org/10.1002/app.41909.10.1002/app.41909 ↗
10. Guo, T., Song, J., Jin, Y., Sun, Z., and Li, L. (2019). Thermally stable and green cellulose-based composites strengthened by styrene-co-acrylate latex for lithium-ion battery separators. Carbohydr. Polym. 206: 801–810, https://doi.org/10.1016/j.carbpol.2018.11.025.10.1016/j.carbpol.2018.11.025 ↗
11. Liang, J., Ning, R., Sun, Z., Liu, X., Sun, W., and Zhou, X. (2021). Preparation and characterization of an eco-friendly dust suppression and sand-fixation liquid mulching film. Carbohydr. Polym. 256: 117429, https://doi.org/10.1016/j.carbpol.2020.117429.10.1016/j.carbpol.2020.117429 ↗
12. Lin, Q., Li, H., Ren, J., Deng, A., Li, W., Liu, C., and Sun, R. (2017). Production of xylooligosaccharides by microwave-induced, organic acid-catalyzed hydrolysis of different xylan-type hemicelluloses: optimization by response surface methodology. Carbohydr. Polym. 157: 214–225, https://doi.org/10.1016/j.carbpol.2016.09.091.10.1016/j.carbpol.2016.09.091 ↗
13. Liu, H. and Chung, H. (2017). Lignin-based polymers via graft copolymerization. J. Polym. Sci. Part A: Polym. Chem. 55: 3515–3528, https://doi.org/10.1002/pola.28744.10.1002/pola.28744 ↗
14. Liu, Y., Nie, W., Mu, Y., Zhang, H., Wang, H., Jin, H., and Liu, Z. (2018). A synthesis and performance evaluation of a highly efficient ecological dust depressor based on the sodium lignosulfonate–acrylic acid graft copolymer. RSC Adv. 8: 11498–11508, https://doi.org/10.1039/c7ra12556a.10.1039/C7RA12556A ↗
15. Lu, W., Zhang, H., Qi, G., Hu, X., Sun, L., Su, H., and Zhang, Q. (2022). Synthesis and properties of environmentally friendly double-network fire fighting gel: based on natural polymer/industrial solid waste. J. Appl. Polym. Sci. 139: e53111, https://doi.org/10.1002/app.53111.10.1002/app.53111 ↗
16. Lu, X., Que, H., Guo, H., Ding, C., Liu, X., Qin, Y., Robin, H.M., Xu, C., and Gu, X. (2021). α-Cellulose-based films: effect of sodium lignosulfonate (SLS) incorporation on physicochemical and antibacterial performance. Cellulose 28: 7243–7256, https://doi.org/10.1007/s10570-021-03949-w.10.1007/s10570-021-03949-w ↗
17. Ma, G., Ran, F., Feng, E., Dong, Z., and Lei, Z. (2015). Effectiveness of an eco-friendly polymer composite sand-fixing agent on sand fixation. Water Air Soil Pollut. 226: 221, https://doi.org/10.1007/s11270-015-2490-7.10.1007/s11270-015-2490-7 ↗
18. Malakar, B., Das, D., and Mohanty, K. (2020). Optimization of glucose yield from potato and sweet lime peel waste through different pre-treatment techniques along with enzyme assisted hydrolysis towards liquid biofuel. Renew. Energy 145: 2723–2732, https://doi.org/10.1016/j.renene.2019.08.037.10.1016/j.renene.2019.08.037 ↗
19. Nath, A. and Chattopadhyay, P.K. (2007). Optimization of oven toasting for improving crispness and other quality attributes of ready to eat potato-soy snack using response surface methodology. J. Food Eng. 80: 1282–1292, https://doi.org/10.1016/j.jfoodeng.2006.09.023.10.1016/j.jfoodeng.2006.09.023 ↗
20. Núñez-Flores, R., Giménez, B., Fernández-Martín, F., López-Caballero, M.E., Montero, M.P., and Gómez-Guillén, M.C. (2012). Role of lignosulphonate in properties of fish gelatin films. Food Hydrocolloids 27: 60–71, https://doi.org/10.1016/j.foodhyd.2011.08.015.10.1016/j.foodhyd.2011.08.015 ↗
21. Qing, Q., Huang, M., He, Y., Wang, L., and Zhang, Y. (2015). Dilute oxalic acid pretreatment for high total sugar recovery in pretreatment and subsequent enzymatic hydrolysis. Appl. Biochem. Biotechnol. 177: 1493–1507, https://doi.org/10.1007/s12010-015-1829-2.10.1007/s12010-015-1829-2 ↗
22. Shankar, S., Reddy, J.P., and Rhim, J.W. (2015). Effect of lignin on water vapor barrier, mechanical, and structural properties of agar/lignin composite films. Int. J. Biol. Macromol. 81: 267–273, https://doi.org/10.1016/j.ijbiomac.2015.08.015.10.1016/j.ijbiomac.2015.08.015 ↗
23. Shen, D.K., Gu, S., Luo, K.H., Wang, S.R., and Fang, M.X. (2010). The pyrolytic degradation of wood-derived lignin from pulping process. Bioresour. Technol. 101: 6136–6146, https://doi.org/10.1016/j.biortech.2010.02.078.10.1016/j.biortech.2010.02.078 ↗
24. Sun, Z. and Chen, F. (2016). Hydrophilicity and antifouling property of membrane materials from cellulose acetate/polyethersulfone in DMAc. Int. J. Biol. Macromol. 91: 143–150, https://doi.org/10.1016/j.ijbiomac.2016.05.072.10.1016/j.ijbiomac.2016.05.072 ↗
25. Tahari, N., de Hoyos-Martinez, P.L., Abderrabba, M., Ayadi, S., and Labidi, J. (2020). Lignin - montmorillonite hydrogels as toluene adsorbent. Coll. Surfaces A Physicochem. Eng. Aspects 602: 125108, https://doi.org/10.1016/j.colsurfa.2020.125108.10.1016/j.colsurfa.2020.125108 ↗
26. Tang, M., Han, M., Gu, W., Xu, W., Lei, F., Li, P., Jiang, J., and Ji, L. (2022). Preparation and characterization of eco-friendly polysaccharide-based liquid mulch with soil amendment function. J. Clean. Product. 363: 132586, https://doi.org/10.1016/j.jclepro.2022.132586.10.1016/j.jclepro.2022.132586 ↗
27. Tian, D., Zhang, J., Hu, J., Huang, M., Zhao, L., Lei, Y., Zou, J., Zhang, S., and Shen, F. (2023). A new water-soluble lignin incorporation enhanced the barrier performance of liquid mulching film. Chem. Eng. J. 452: 139383, https://doi.org/10.1016/j.cej.2022.139383.10.1016/j.cej.2022.139383 ↗
28. Wang, A., Sun, Z., Ning, R., Liang, J., Li, L., and Zhou, X. (2019). Study on cellulose/nylon 6 lithium battery separators modification by polyacrylonitrile in ionic liquid [Emim]Ac. AIP Adv. 9: 085027, https://doi.org/10.1063/1.5116286.10.1063/1.5116286 ↗
29. Wu, R.L., Wang, X.L., Li, F., Li, H.Z., and Wang, Y.Z. (2009). Green composite films prepared from cellulose, starch and lignin in room-temperature ionic liquid. Bioresour. Technol. 100: 2569–2574, https://doi.org/10.1016/j.biortech.2008.11.044.10.1016/j.biortech.2008.11.044 ↗
30. Yadav, N. and Hakkarainen, M. (2021). Degradable or not? Cellulose acetate as a model for complicated interplay between structure, environment and degradation. Chemosphere 265: 128731, https://doi.org/10.1016/j.chemosphere.2020.128731.10.1016/j.chemosphere.2020.128731 ↗
31. Yang, K. and Tang, Z. (2012). Effectiveness of fly ash and polyacrylamide as a sand-fixing agent for wind erosion control. Water Air Soil Pollut. 223: 4065–4074, https://doi.org/10.1007/s11270-012-1173-x.10.1007/s11270-012-1173-x ↗
32. Yao, F., Shen, F., Wan, X., and Hu, C. (2020). High yield and high concentration glucose production from corncob residues after tetrahydrofuran + H2O co-solvent pretreatment and followed by enzymatic hydrolysis. Renew. Sustain. Energy Rev. 132: 110107, https://doi.org/10.1016/j.rser.2020.110107.10.1016/j.rser.2020.110107 ↗
33. Yemis, O. and Mazza, G. (2011). Acid-catalyzed conversion of xylose, xylan and straw into furfural by microwave-assisted reaction. Bioresour. Technol. 102: 7371–7378, https://doi.org/10.1016/j.biortech.2011.04.050.10.1016/j.biortech.2011.04.050 ↗
34. Zhang, W., Zhang, Y., Liang, H., Liang, D., Cao, H., Liu, C., Qian, Y., Lu, Q., and Zhang, C. (2019). High bio-content castor oil based waterborne polyurethane/sodium lignosulfonate composites for environmental friendly UV absorption application. Ind. Crops Prod. 142: 111836, https://doi.org/10.1016/j.indcrop.2019.111836.10.1016/j.indcrop.2019.111836 ↗