Out-of-plane uniaxial loading of paperboard: experimental procedure and evaluation

Abstract Development of three-dimensional continuum models for paperboard is an active field and the need for reliable measurements to calibrate and validate such models is evident. An experimental device and protocol for cyclic out-of-plane loading is developed. This loading sequence is present during converting operations of paperboard. The experimental tests reveals that the commonly observed soft initial non-linear response during out-of-plane compression is a structural effect that stems from the surface roughness rather than being an inherent material behavior. A gluing procedure, used to perform cyclic out-of-plane loading, is mitigating the effect of the surface roughness. Several novel cyclic loading experiments are performed, alternating between compression and tension which indicates that fiber bonds are not recovered in compression after they have been broken through delamination. Measurements also show that the transition in compression and tension is continuous, hence the use of a switch function present in a number of constitutive continuum models for paperboard is deemed questionable.