The effect of paper coatings containing biopolymer binder and different natural pigments on printability
Source abstract
Abstract
Abstract Paper is an environmentally friendly, recyclable material whose main material is cellulose, which can be obtained from all kinds of trees and plants, used as writing, printing and packaging material. Due to its structural properties, papers are not resistant to temperature and humidity, as well as problems with ink transfer with its porous structure and experienced negative printability properties. In recent years, especially the growth of the packaging industry has increased the demand for papers with improved printability properties. In order to obtain better printability properties from papers, some processes can be performed in paper production, as well as some surface treatments after production. These processes are paper coating, sizing and calendering. Paper coatings are generally water-dispersed coating solutions with one or more pigments, binders and certain additives to improve the desired properties. With these processes, by filling the gaps between the pores of the paper, a shapely and smooth surface is obtained and good printability is obtained together with the optical and physical properties of the papers. In this study, the interactions and printability properties of different types of pigments with xanthan gum binder were investigated by preparing paper coating formulations using calcium carbonate, barite and talc pigments and xanthan gum as binder. As a result, xanthan is a good coating binder and {\mathrm{CaCO}3} from the compared pigments is the most suitable compared to the other 2 pigments, considering all the studied areas.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Material Properties and Processing · Advanced Cellulose Research Studies · Lignin and Wood Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
52982 Marmara University , School of Applied Sciences, Department of Printing Technologies , Goztepe Istanbul , , Turkey
52982 Marmara University , Vocational School of Technical Sciences, Department of Audiovisual Techniques and Media Production , Goztepe Istanbul , , Turkey
References (53)
Show source-provided references
1. Adriana, G., Jussi, L., Robert, S., Franz, S. (2013) Humidity response of Kraft papers determined by dynamic mechanical analysis. Thermochim. Acta 570:33–40.10.1016/j.tca.2013.07.025 ↗
2. Akkurt, I., Basyigit, C., Kilincarslan, S., Mavi, B. (2005) The shielding of γ-rays by concretes produced with barite. Prog. Nucl. Energy 46(1):1–11.10.1016/j.pnucene.2004.09.015 ↗
3. Bahl, S., Lochab, S.P., Pandey, A., Kumar, V., Aleynikov, V.E., Molokanov, A.G., Kumar, P. (2014) Characterization and luminescence studies of Eu doped Barite nanophosphor. J. Lumin. 149:176–184.10.1016/j.jlumin.2014.01.009 ↗
4. Bates, I., Džimbeg-Malčić, V., Itrić, K. (2012) Optical deterioration of samples printed with basic Pantone inks. Acta Graph. 23(3-4):79–90.
5. Beyler-Çiğil, A., Kahraman, M.V. (2016) Effect of surface modification on nano-diamond particles for surface and thermal property of UV-curable hybrid coating. Prog. Org. Coat. 101:468–476.10.1016/j.porgcoat.2016.09.015 ↗
6. Bhardwaj, S., Bhardwaj, N.K., Negi, Y.S. (2021) Surface coating of chitosan of different degree of acetylation on non surface sized writing and printing grade paper. Carbohydr. Polym. 117674.10.1016/j.carbpol.2021.117674 ↗
7. Borgqvist, E., Wallin, M., Ristinmaa, M., Tryding, J. (2015) An anisotropic in-plane and out-of-plane elasto-plastic continuum model for paperboard. Compos. Struct. 126:184–195.10.1016/j.compstruct.2015.02.067 ↗
8. Caner, E., Farnood, R., Yan, N. (2006) Effect of the coating formulation on the gloss properties of coated papers. In: International Printing and Graphic Arts Conference, pp. 1–18.
9. Cataldi, P., Profaizer, M., Bayer, I.S. (2019) Preventing water-induced mechanical deterioration of cardboard by a sequential polymer treatment. Ind. Eng. Chem. 58(16):6456–6465.10.1021/acs.iecr.9b00712 ↗
10. Chan-Koyoc, M.C., Cruz-Estrada, R.H., Cruz-Delgado, V.J., Carrillo, J.G. (2019) Effect of natural and accelerated aging on the mechanical performance of a composite based on recycled multilayer carton. J. Polym. Environ. 27(11):2509–2522.10.1007/s10924-019-01538-4 ↗
11. Chheda, J.N., Huber, G.W., Dumesic, J.A. (2007) Liquid-phase catalytic processing of biomass-derived oxygenated hydrocarbons to fuels and chemicals. Angew. Chem., Int. Ed. Engl. 46(38):7164–7183.10.1002/anie.200604274 ↗
12. Chiacchiarelli, L.M., Cerrutti, P., Flores-Johnson, E.A. (2020) Compressive behavior of rigid polyurethane foams nanostructured with bacterial nanocellulose at low and intermediate strain rates. J. Appl. Polym. Sci. 137(20):48701.10.1002/app.48701 ↗
13. Choi, E.H., Kim, C.H., Youn, H.J., Lee, H.L. (2015) Influence of PVA and CMC on the properties of pigment coating colors and their effects on curtain stability. BioResources 10(4):7188–7202.10.15376/biores.10.4.7188-7202 ↗
14. Cigula, T., Hudika, T., Katana, M., Krizmanić, M.G., Tomašegović, T. (2020) The influence of PCL-ZnO coating composition on coated offset cardboard prints. In: Proceedings of the 10th International Symposium on Graphic Engineering and Design, GRID2020, Novi Sad (pp. 101–108).10.24867/GRID-2020-p8 ↗
15. de Andrade, M.F.C., Strauss, M., Morales, A.R. (2019) Toward greener polymeric blends: study of PBAT/Thermoplastic whey protein isolate/beeswax blends. J. Polym. Environ. 27(10):2131–2143.10.1007/s10924-019-01502-2 ↗
16. Dongmei, W., Huxiang, G., Ziyou, B. (2013) Effect investigation of relative humidity and temperature on multi-layer corrugated sandwich structures. J. Sandw. Struct. Mater. 15(2):156–167.10.1177/1099636212463834 ↗
17. Farhat, W., Venditti, R.A., Hubbe, M., Taha, M., Becquart, F., Ayoub, A. (2017) A review of water-resistant hemicellulose-based materials: processing and applications. ChemSusChem 10(2):305–323.10.1002/cssc.201601047 ↗
18. Ferreira, P.J., Gamelas, J.A., Moutinho, I.M., Ferreira, A.G., Gómez, N., Molleda, C., Figueiredo, M.M. (2009) Application of FT-IR-ATR spectroscopy to evaluate the penetration of surface sizing agents into the paper structure. Ind. Eng. Chem. 48(8):3867–3872.10.1021/ie801765c ↗
19. Gatto, M., Ochi, D., Yoshida, C.M.P., da Silva, C.F. (2019) Study of chitosan with different degrees of acetylation as cardboard paper coating. Carbohydr. Polym. 210:56–63.10.1016/j.carbpol.2019.01.053 ↗
20. Ghanbari, H., Kasmani, J.E., Samariha, A. (2019) Improving printing and writing paper properties by coating with nanoclay montmorillonite (K10). Cellul. Chem. Technol. 53:395–403.10.35812/CelluloseChemTechnol.2019.53.40 ↗
21. Ghorai, S., Sarkar, A., Panda, A.B., Pal, S. (2013) Evaluation of the flocculation characteristics of polyacrylamide grafted xanthan gum/silica hybrid nanocomposite. Ind. Eng. Chem. Res. 52(29):9731–9740.10.1021/ie400550m ↗
22. Grafia, A.L., Castillo, L.A., Barbosa, S.E. (2014) Use of talc as low-cost clarifier for wastewater. Water Sci. Technol. 69(3):640–646.10.2166/wst.2013.755 ↗
23. Hubbe, M.A., Gill, R.A. (2016) Fillers for papermaking: a review of their properties, usage practices, and their mechanistic role. BioResources 11(1):2886–2963.10.15376/biores.11.1.2886-2963 ↗
24. ISO 12647-2:2013 Graphic technology – Process control for the production of half-tone colour separations, proof and production prints – Part 2: Offset lithographic processes.
25. Jiang, Y., Li, X., Wang, X., Meng, L., Wang, H., Peng, G., Wang, X., Mu, X. (2012) Effective saccharification of lignocellulosic biomass over hydrolysis residue derived solid acid under microwave irradiation. Green Chem. 14(8):2162–2167.10.1039/c2gc35306g ↗
26. Jimenez-Francisco, M., Flores-Johnson, E.A., Carrillo, J.G. (2020) Effect of recycled polystyrene/limonene coating on the mechanical properties of Kraft paper: a comparative study with commercial coatings. J. Polym. Environ. 28(6):1724–1736.10.1007/s10924-020-01721-y ↗
27. Jimoh, O.A., Ariffin, K.S., Hussin, H.B., Temitope, A.E. (2018) Synthesis of precipitated calcium carbonate: a review. Carbonates Evaporites 33(2):331–346.10.1007/s13146-017-0341-x ↗
28. Joshy, K.S., Jose, J., Li, T., Thomas, M., Shankregowda, A.M., Sreekumaran, S. Thomas, S. (2020) Application of novel zinc oxide reinforced xanthan gum hybrid system for edible coatings. Int. J. Biol. Macromol. 151:806–813.10.1016/j.ijbiomac.2020.02.085 ↗
29. Kandirmaz, E.A., Ozcan, A. (2019) Antibacterial effect of Ag nanoparticles into the paper coatings. Nord. Pulp Pap. Res. J. 34(4):507–515.10.1515/npprj-2019-0034 ↗
30. Kandirmaz, E.A., Ozcan, A., Ulusoy, D.E. (2020) Production of thermochromic microcapsulated inks for smart packaging and examination of printability properties. Pigment Resin Technol. 49(4):273–281.10.1108/PRT-12-2019-0116 ↗
31. Katircioglu-Bayel, D. (2020) Impact of operating parameters on the breakage process of talc. Min. Metall. Explor. 37(5):1717–1727.10.1007/s42461-020-00270-1 ↗
32. Lavoine, N., Guillard, V., Desloges, I., Gontard, N., Bras, J. (2016) Active bio-based food-packaging: diffusion and release of active substances through and from cellulose nanofiber coating toward food-packaging design. Carbohydr. Polym. 149:40–50.10.1016/j.carbpol.2016.04.048 ↗
33. Li, H., Qi, Y., Zhao, Y., Chi, J., Cheng, S. (2019) Starch and its derivatives for paper coatings: A review. Prog. Org. Coat. 135:213–227.10.1016/j.porgcoat.2019.05.015 ↗
34. Li, J., Zhao, C., Han, W., Jiang, Y. (2019) Study on color ink-jet printing paper coating with nano-SiO2 as pigment. In: E3S Web of Conferences. Vol. 79, pp. 01002 (EDP Sciences).10.1051/e3sconf/20197901002 ↗
35. Luo, M.R., Cui, G., Rigg, B. (2001) The development of the CIE 2000 colour-difference formula: CIEDE2000. Color Research & Application: Endorsed by Inter-Society Color Council, The Colour Group (Great Britain), Canadian Society for Color, Color Science Association of Japan, Dutch Society for the Study of Color, The Swedish Colour Centre Foundation, Colour Society of Australia, Centre Français de la Couleur, 26:340–350.10.1002/col.1049 ↗
36. Neto, J.B.R., Moreno, R. (2007) Rheological behaviour of kaolin/talc/alumina suspensions for manufacturing cordierite foams. Appl. Clay Sci. 37(1-2):157–166.10.1016/j.clay.2006.12.007 ↗
37. Oh, K., Lee, J.H., Im, W., Rajabi Abhari, A., Lee, H.L. (2017) Role of cellulose nanofibrils in structure formation of pigment coating layers. Ind. Eng. Chem. 56(34):9569–9577.10.1021/acs.iecr.7b02750 ↗
38. Ozcan, A., Tutak, D. (2020) The effect of zeolite on inkjet coated paper surface properties and deinking. Nord. Pulp Pap. Res. J. 35(3):432–439.10.1515/npprj-2020-0025 ↗
39. Pi, G., Li, Y., Bao, M., Mao, L., Gong, H., Wang, Z. (2016) Novel and environmentally friendly oil spill dispersant based on the synergy of biopolymer xanthan gum and silica nanoparticles. ACS Sustain. Chem. Eng. 4(6):3095–3102.10.1021/acssuschemeng.6b00063 ↗
40. Raheem, D. (2013) Application of plastics and paper as food packaging materials – an overview. Emir. J. Food Agric. 177–188.10.9755/ejfa.v25i3.11509 ↗
41. Rastogi, V.K., Samyn, P. (2015) Bio-based coatings for paper applications. Coatings 5(4):887–930.10.3390/coatings5040887 ↗
42. Sani, H.A., Ahmad, M.B., Saleh, T.A. (2016) Synthesis of zinc oxide/talc nanocomposite for enhanced lead adsorption from aqueous solutions. RSC Adv. 6(110):108819–108827.10.1039/C6RA24615J ↗
43. Secchi, S., Asdrubali, F., Cellai, G., Nannipieri, E., Rotili, A., Vannucchi, I. (2016) Experimental and environmental analysis of new sound-absorbing and insulating elements in recycled cardboard. J. Build. Eng. 5:1–12.10.1016/j.jobe.2015.10.005 ↗
44. Shankar, S., Rhim, J.W. (2018) Effects of poly (butylene adipate-co-terephthalate) coating on the water resistant, mechanical, and antibacterial properties of Kraft paper. Prog. Org. Coat. 123:153–159.10.1016/j.porgcoat.2018.07.002 ↗
45. Shen, J., Song, Z., Qian, X., Yang, F. (2010) Carboxymethyl cellulose/alum modified precipitated calcium carbonate fillers: Preparation and their use in papermaking. Carbohydr. Polym. 81(3):545–553.10.1016/j.carbpol.2010.03.012 ↗
46. Sun, S., Ding, H., Zhou, H. (2017) Preparation of TiO2-coated barite composite pigments by the hydrophobic aggregation method and their structure and properties. Sci. Rep. 7(1):1–12.10.1038/s41598-017-10620-7 ↗
47. Ten, E., Vermerris, W. (2013) Functionalized polymers from lignocellulosic biomass: State of the art. Polymers 5(2):600–642.10.3390/polym5020600 ↗
48. Wang, D.M., Wang, J., Liao, Q.H. (2013) Investigation of mechanical property for paper honeycomb sandwich composite under different temperature and relative humidity. J. Reinf. Plast. Compos. 32(13):987–997.10.1177/0731684413475912 ↗
49. Xu, W., Jin, W., Huang, K., Huang, L.U., Lou, Y., Li, J., Li, B. (2018) Interfacial and emulsion stabilized behavior of lysozyme/xanthan gum nanoparticles. Int. J. Biol. Macromol. 117:280–286.10.1016/j.ijbiomac.2018.05.187 ↗
50. Yin, J., Tang, H., Xu, Z., Li, N. (2021) Enhanced mechanical strength and performance of sulfonated polysulfone/Tröger’s base polymer blend ultrafiltration membrane. J. Membr. Sci. 625:119138.10.1016/j.memsci.2021.119138 ↗
51. Zambrano-Zaragoza, M.L., Quintanar-Guerrero, D., Del Real, A., Piñon-Segundo, E., Zambrano-Zaragoza, J.F. (2017) The release kinetics of β-carotene nanocapsules/xanthan gum coating and quality changes in fresh-cut melon (cantaloupe). Carbohydr. Polym. 157:1874–1882.10.1016/j.carbpol.2016.11.075 ↗
52. Zhou, H., Wang, M., Ding, H., Du, G. (2015) Preparation and characterization of barite/TiO2 composite particles. Adv. Mater. Sci. Eng. 1–8.10.1155/2015/878594 ↗
53. Zhu, R., Liu, X., Song, P., Wang, M., Xu, F., Jiang, Y., Zhang, X. (2018) An approach for reinforcement of paper with high strength and barrier properties via coating regenerated cellulose. Carbohydr. Polym. 200:100–105.10.1016/j.carbpol.2018.07.069 ↗