Additives to decrease cellulose chain scission during ozone bleaching of wheat straw pulp
Source abstract
Abstract
Abstract The efficacy of different chemical additives like acetic acid, ammonium molybdate, diethylene triamine pentaacetic acid (DTPA), mannitol, methanol, per acetic acid (PAA), sodium hypochlorite (NaOCl) and sulfamic acid as carbohydrate protector during ozone bleaching of wheat straw pulp was studied. DTPA was found the most effective additive for ozone bleaching followed by the methanol. Using DTPA during ozone treatment improved the delignification efficiency by 13.8 %, bleaching efficiency by 19.8 %, selectivity of ozone by 124 % and reduced the chain scission number of glycosidic linkages in cellulose by 55.3 % compared to that of control. Ozone treatment along with DTPA reduced the Fe, Cu and Mn content in the pulp by 52 %, 27 % and 70 %, respectively. Use of methanol improved the delignification efficiency by 9.0 %, bleaching efficiency by 12.2 %, selectivity by 32.4 % and reduced the chain scission number by 22.2 % compared to that of control. The NaOCl was found to be the most effective for improving the delignification efficiency followed by PAA, they improved the delignification efficiency by 29.3 % and 27.3 %, respectively. The PAA improved the bleaching efficiency to a maximum of 39.9 % followed by 30.2 % with NaOCl.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Lignin and Wood Chemistry · Advanced Cellulose Research Studies · Wood Treatment and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Avantha Centre for Industrial Research & Development , Paper Mill Campus , Yamuna Nagar – 135 001, Haryana , India
Department of Chemical Engineering , Sant Longowal Institute of Engineering and Technology , Longowal-148106 , Sangrur , Punjab , India
References (42)
Show source-provided references
1. Agnemo, P. (2002) Reinforcement of oxygen-containing chemicals with molybdates. J. Pulp Pap. Sci. 28(1):23–25.
2. Bouchard, J., Morelli, E., Berry, R.M. (2000) Gas-phase addition of solvent to ozone bleaching of kraft pulp. J. Pulp Pap. Sci. 26(1):30–35.
3. Brolin, A., Gierer, J., Zhang, Y. (1993) On the selectivity of ozone delignification of softwood kraft pulps. Wood Sci. Technol. 27(2):115–129.10.1007/BF00206229 ↗
4. Dahl, O., Niinimäki, J., Tirri, T., Kuopanportti, H. (1998) Bleaching softwood kraft pulp: Role of the transition metals iron, copper and manganese in D stages. In: International pulp bleaching conference, Helsinki, Finland. pp. 383–388.
5. Deschatelets, L., Errest, K.C.U. (1986) A simple pentose assay for biomass conversion studies. Appl. Microbiol. Biotechnol. 24(5):379–385.10.1007/BF00294594 ↗
6. Evans, R., Wallis, A.F.A. (1989) Cellulose molecular weights determined by viscometry. J. Appl. Polym. Sci. 37:2331–2340.10.1002/app.1989.070370822 ↗
7. Fengel, D., Wegener, G. Wood chemistry, ultrastructure, reactions. Walter de Gruyter, Berlin/New York, 1984. 75.10.1515/9783110839654 ↗
8. Fuhrman, A., Li, X., Rautonen, R. (1997) Influence of ozone and peracetic acid on pulp and effluent characteristic. In: TAPPI Pulping Conference. pp. 615–624.
9. Ghosh, A., Ni, Y. (1998) Metal ion complexes and their relationship to pulp brightness. J. Pulp Pap. Sci. 24(1):26–31.
10. Griffin, R., Van Heiningen, A.R.P. (1998) The development of delignification on lignincellulose selectivity During ozone bleaching. J. Pulp Pap. Sci. 24(4):111–115.
11. Harland, W.G. (1952) Relation between intrinsic viscosity and degree of polymerization. Nature 4329:667.10.1038/170667a0 ↗
12. Huber, P., Jiang, Z.H., van Lierop, B., Berry, R. (2006) How does ozone in chlorine dioxide stages affect bleached yield of kraft pulp. In: 92nd annual meeting of the PAPTAC, Montreal, QC, Canada. pp. 1–6.
13. Hui, L., Wang, F., Pang, J., Liu, Z. (2017) Understanding of HEDP used as chelator in pulp bleaching. Cellul. Chem. Technol. 51(3–4):301–306.
14. Jablonsky, M. (2009) Optimization of ozone bleaching conditions of oxygen delignified Hardwood kraft pulp with d-mannitol. Wood Res. 54(2):73–82.
15. Jablonsky, M., Vrska, M., Katuscak, S., Cedzova, M. (2005) Bleaching sequence ZARE: Influence of new celulose protectors on characteristic properties of pulp. In: 6th International symposium on selected processes in the wood processing, Zvolen, Slovakia. pp. 109–116.
16. Jablonsky, M., Vrska, M., Suty, S., Szeiffova, G. (2007) Ozone bleaching of kraft pulp of beech in the presence of peracetic acid as cellulose protector. Wood Res. 50(4):51–60.
17. Kamishima, H., Fujii, T., Akamatsu, I. (1977) Effect of cellulose protectors on ozone bleaching of kraft pulp. Japan Tappi 31(9):664–672.10.2524/jtappij.31.9_664 ↗
18. Kamishima, H., Fujii, T., Akamatsu, I. (1984) Mechanism of carbohydrate protection with oxalic acid and methanol during ozone bleaching of unbleached kraft pulp. Japan Tappi 30(11):927–935. 21.
19. Kamishima, H., Fujii, T., Akamatsu, I., Nakyama, S. (1982) The effect of organic acids on carbohydrate protection during ozone bleaching of kraft pulp. Japan Tappi 28(6):370–375.
20. Lapierre, L., Paleologou, M., Berry, R.M., Bouchard, J. (1997) The limits of metal removal from kraft pulp by acid treatment. J. Pulp Pap. Sci. 23(11):539–542.
21. Lindholm, C.A. (1990) Effect of dissolved reaction products on pulp viscosity in low consistency ozone bleaching. Pap. Puu 72(3):254–256.
22. Maia, E.P., Colodette, J.L. (2003) Effect of residual lignin content and nature on the efficiency and selectivity of ozone bleaching. Rev. Árvore 27(2):217–232.10.1590/S0100-67622003000200011 ↗
23. Medwick, V.B., Gratzl, J.S., Singh, R.P. (1992) Delignification and bleaching of chemical pulps with ozone: A literature review. Tappi J. 77(3):207–213.
24. Metais, A. (2017) Standard ozone bleaching sequences for eucalyptus pulp. In: Proceedings 8th International Colloquium on Eucalyptus Pulp, Chile, 23–26 April 2017.
25. Okubo, K., Oki, T., Ishikawa, H. (1982) Bleaching of thermomechanical pulp by NaOCl-ozone system and characteristic properties of bleached pulp. Japan Tappi 36(8):807–814.10.2524/jtappij.36.807 ↗
26. Pouyet, F., Chirat, C., Lachenal, D. (2013) On the origin of cellulose depolymerization during ozone treatment of hardwood kraft pulp. BioResources 8(4):5289–5298.10.15376/biores.8.4.5289-5298 ↗
27. Ragnar, M., Eriksson, T., Reitberger, T. (1999) Radical formation in ozone reactions with lignin and carbohydrate model compounds. Holzforschung 53(3):292–298.10.1515/HF.1999.049 ↗
28. Rakness, K., Gordon, G., Langlais, B., Masschelein, W., Matsumoto, N., Richard, Y., Robson, C.M., Somiya, I. (1996) Guideline for measurement of ozone concentration in the process gas from an ozone generator. Ozone: Sci. Eng. 18(3):209–229.10.1080/01919519608547327 ↗
29. Roncero, M.B., Colom, J.F., Vidal, T. (2001) Enhancing the ozone stage selectivity in a TCF sequence like XOZP, Part II – Using additives. Afinidad 58:121–128.
30. Roncero, M.B., Colom, J., Vidal, T. (2002) Increasing the selectivity of ozone bleaching of eucalypt kraft pulp Part-B. Appita J. 55(5):386–391.
31. Roncero, M.B., Colom, J.F., Vidal, T. (2003) Why oxalic acid protects cellulose during ozone treatments. Carbohydr. Polym. 52(4):411–422.10.1016/S0144-8617(02)00333-8 ↗
32. Rothenberg, S., Robinson, D.H., Johnsonbaugh, D.K. (1975) Bleaching of oxygen pulps with ozone. Tappi J. 58(8):182–185.
33. Saake, B., Lehnen, R., Schmekal, A., Neubauer, A., Nimz, H.H. (1998) Bleaching of formacell pulp from aspen wood with ozone and peracetic acid in organic solvents. Holzforshung 52(6):643–650.10.1515/hfsg.1998.52.6.643 ↗
34. Sjöström, E. Wood Chemistry. Academic Press, London, 1993. 64.
35. Sridach, W. (2010) The environmentally benign Pulping process of non-wood fibers. Suranaree J. Sci. Technol. 17(2):105–123.
36. Subrahmanyam, S.V., Godiyal, R., Janbade, V., Sharma, A. (2004) Research Report on preparation of monograph of different fibrous raw materials used by Indian paper industry. http://www.dcpulppaper.org/gifs/report24.pdf.
37. Tripathi, S., Bhardwaj, N.K., Ghatak, H.R. (2018a) Determination of main parameters affecting the ozone bleaching of wheat straw pulp using plackett–burman design. Ozone: Sci. Eng. 40(2):148–156.10.1080/01919512.2017.1352483 ↗
38. Tripathi, S., Bhardwaj, N.K., Ghatak, H.R. (2018b) Optimization of ozone bleaching conditions for improving wheat straw pulp quality using response surface methodology. Ozone: Sci. Eng. Accepted for publication.10.1080/01919512.2018.1508331 ↗
39. Updegraff, D.M. (1969) Semimicro determination of cellulose in biological materials. Anal. Biochem. 32(3):420–424.10.1016/S0003-2697(69)80009-6 ↗
40. Wuorimaa, A., Jokela, R., Aksela, R. (2006) Recent developments in the stabilization of hydrogen peroxide bleaching of pulps: An overview. Nord. Pulp Pap. Res. J. 21(4):435–443.10.3183/npprj-2006-21-04-p435-443 ↗
41. Zhang, X.Z., Kang, G.J., Ni, Y., van Heiningen, A.R.P., Mislankar, A., Darabie, A., Reeve, D. (1998) Initial Delignification and Cellulose Degradation of Conventional and Ethanol-Assisted Ozonation. J. Wood Chem. Technol. 18(2):129–157.10.1080/02773819809349573 ↗
42. Zhang, X.Z., Ni, Y., Van Heiningen, A. (2000) Kinetics of cellulose degradation during ozone bleaching. J. Pulp Pap. Sci. 26(9):335–339.