The effect of zeolite on inkjet coated paper surface properties and deinking
Source abstract
Abstract
Abstract Coatings are generally applied for opacity, smoothness and gloss on the paper surface. Pigments such as CaCO3, Kaolin-Clay and Zeolite are used, and natural or synthetic binders are used. In this study, coatings using the CaCO3, Kaolin-Clay and Zeolite pigments on 80 gr/m2 high grade papers were made. PVOH was used as binder. Following coating, papers were processed through supercalendering and printed with inkjet printer. Using INGEDE method 11p. recycling process printed papers were deinked. The optical properties of the recycled papers obtained after the deinking treatment, were compared with the unprinted papers. At the end of the study, the effect of coating on paper surface and the recycling performances of the inkjet printed papers were revealed. It was determined that the papers in which zeolite was used as a pigment were better, in terms of both surface properties and recycling performance when surface properties and recycling performance of coated papers were examined. When all the results were compared, it was found that the performances of coatings for which zeolite was used were much better than coatings such as CaCO3 and Kaolin-Clay, both in terms of surface coating properties such as opacity, roughness and gloss and recycling results such as brightness.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Material Properties and Processing · Advanced Cellulose Research Studies · Cultural Heritage Materials Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
52982 Marmara University , School of Applied Sciences, Department of Printing Technologies , Goztepe , Istanbul , , Turkey
References (30)
Show source-provided references
1. Brouillette, F., Chabot, B., Morneau, D., Daneault, C. (2004) Effect of physico-chemical conditions on the properties of zeolite microparticles used in pulp and paper applications. Microporous Mesoporous Mater. 70(1-3):51–56.10.1016/j.micromeso.2004.03.001 ↗
2. Delgado-Aguilar, M., González, I., Pèlach, M.A., De La Fuente, E., Negro, C., Mutjé, P. (2015) Improvement of deinked old newspaper/old magazine pulp suspensions by means of nanofibrillated cellulose addition. Cellulose 22(1):789–802.10.1007/s10570-014-0473-2 ↗
3. Du, X.T., Lee, D.T., Hsieh, J.S. (2016) Inkjet ink behaviors and its implication in adsorption deinking. Sep. Sci. Technol. 51(18):2857–2867.10.1080/01496395.2016.1226902 ↗
4. Eliseev, A.A., Kumskov, A.S., Falaleev, N.S., Zhigalina, V.G., Eliseev, A.A., Mitrofanov, A.A., Petukhov, D.I., Vasiliev, A.L., Kiselev, N.A. (2017) Mass transport through defects in graphene layers. J. Phys. Chem. C 121(42):23669–23675.10.1021/acs.jpcc.7b06100 ↗
5. Fjellström, H., Höglund, H., Forsberg, S., Paulsson, M. (2009) Coating. Nord. Pulp Pap. Res. J. 24(2):206–212.10.3183/npprj-2009-24-02-p206-212 ↗
6. Fricker, A., Thompson, R., Manning, A. (2007) Novel solutions to new problems in paper deinking. Pigment Resin Technol. 36(3):141–152.10.1108/03699420710749009 ↗
7. Gea, T., Artola, A., Sánchez, A. (2005) Composting of deinking sludge from the recycled paper manufacturing industry. Bioresour. Technol. 96(10):1161–1167.10.1016/j.biortech.2004.09.025 ↗
8. Hashim, F.S., Yousif, H.Y., Khalil, M.R. (2009) Reinforcing effect of nano kaolin clay on some optical properties of poly (methyl methacrylate) for medical application. J. Glob. Pharma Technol. 10:315–321.
9. Hsu, P.Y., Hu, T.Y., Kumar, S.R., Chang, C.H., Wu, K.C.W., Tung, K.L., Lue, S.J. (2018) Highly zeolite-loaded polyvinyl alcohol composite membranes for alkaline fuel-cell electrolytes. Polymers 10(1):102.10.3390/polym10010102 ↗
10. Husovska, V., Pekarovic, J., Pekarovicova, A., Fleming III, P.D. (2015) Soybean oil based inks for enhanced deinkability of litho prints. J. Print Media Technol. Res. 4(4):279–283.
11. Imamoglu, S. (2006) Deinkability Efficiency of Waste Office Paper Printed Using a Duplicating Machine. J. Appl. Sci. 6(9):2006–2009.10.3923/jas.2006.2006.2009 ↗
12. Ingede Method 11, Assessment of print product recyclability – Deinkability test, 2018.
13. Kandirmaz, E.A., Birtane, H., Cigil, A.B., Ozcan, A. (2020) pH-controlled lavender oil capsulation with ABA-type block copolymer and usage in paper coating. Flavour Fragr. 35(2):174–181.10.1002/ffj.3549 ↗
14. Kisku, S.K., Sarkar, N., Dash, S., Swain, S.K. (2014) Preparation of starch/PVA/CaCO3 nanobiocomposite films: study of fire retardant, thermal resistant, gas barrier and biodegradable properties. Polym.-Plast. Technol. Eng. 53(16):1664–1670.10.1080/03602559.2014.919650 ↗
15. Klass, C.P., Joyce, M.K. (2004) High performance purified natural zeolite pigment for papermaking and paper coating. U.S. Patent No. 6,679,973.
16. Klass, C.P., Sikora, M.D. (2007) High performance natural zeolite microparticle retention aid for papermaking. U.S. Patent No. 7,201,826.
17. Koenig, M.F. (2014) Coated printable substrates providing higher print quality and resolution at lower ink usage. U.S. Patent No. 8,795,796 B2.
18. Lee, C.K., Darah, I., Ibrahim, C.O. (2007) Enzymatic deinking of laser printed office waste papers: some governing parameters on deinking efficiency. Bioresour. Technol. 98(8):1684–1689.10.1016/j.biortech.2006.05.052 ↗
19. Morsy, F.A., El-Sherbiny, S., Samir, M., Fouad, O.A. (2016) Application of nanostructured titanium dioxide pigments in paper coating: a comparison between prepared and commercially available ones. J. Coat. Technol. Res. 13:307–316.10.1007/s11998-015-9735-7 ↗
20. Ozcan, A., Kandirmaz, E.A. (2020) Natural ink production and printability studies for smart food packaging. Color Res. Appl. 45(3):495–502.10.1002/col.22488 ↗
21. Ozcan, A., Kandirmaz, E.A., Hayta, P., Mutlu, B. (2019) Examination of the effect of melamine as a filler in paper coatings on print quality. Cellul. Chem. Technol. 53(3-4):307–313.10.35812/CelluloseChemTechnol.2019.53.30 ↗
22. Pathak, P., Bhardwaj, N.K., Singh, A.K. (2011) Optimization of chemical and enzymatic deinking of photocopier waste paper. BioResources 6(1):447–463.10.15376/biores.6.1.447-463 ↗
23. Sarkar, B., Sunitha, K., Sridhar, S., Kale, V. (2013) Bioethanol dehydration through polyvinyl alcohol (PVA) and 3A zeolite mixed matrix composite pervaporation membrane. J. Polym. Mater. 30(2):131–143.
24. Saxena, A., Singh Chauhan, P. (2017) Role of various enzymes for deinking paper: a review. Crit. Rev. Biotechnol. 37(5):598–612.10.1080/07388551.2016.1207594 ↗
25. Shrungi, M., Goswami, A., Bajpai, J., Bajpai, A.K. (2019) Designing kaolin-reinforced bionanocomposites of poly (vinyl alcohol)/gelatin and study of their mechanical and water vapor transmission behavior. Polym. Bull. 76(11):5791–5811.10.1007/s00289-019-02684-4 ↗
26. Thibodeau, J.B., Chabot, B., Daneault, C. (2004) Calcium ion removal by a synthetic zeolite in the manufacture of mechanical grade papers. In: Annual Meeting-Pulp and Paper Technical Association of Canada, 90(A). pp. 85–90. Pulp and Paper Technical Association of Canada; 1999.
27. Toles, C. (2018) Coated print media and method for making the same. U.S. Patent No. 9,944,106.
28. Tutak, D. (2017) Modified deinking of digitally printed paper with water based inkjet ink. Cellul. Chem. Technol. 51(5-6):483–488.
29. Zhang, Z., Zhang, Q., Zhang, M., Huang, R., Han, Y. (2018) Effect of pigment sizing on printability and coating structure of decorative base paper. Nord. Pulp Pap. Res. J. 33(1):105–112.10.1515/npprj-2018-3005 ↗
30. Zidan, H.M. (2003) Structural properties of CrF3 and MnCl2 filled poly (vinyl alcohol) films. J. Appl. Polym. Si. 88(5):1115–1120.10.1002/app.12123 ↗