The effects of process variables for GCC pre-flocculation on floc and handsheet properties

Abstract Pre-flocculation is a technique that aggregates filler particles by means of polyelectrolytes. The size of the filler flocs is a critical factor affecting the properties of the paper. Process variables including the concentration of the flocculants, the stirring speed, and the dilution of the suspension change the size of the flocculated fillers. Ground calcium carbonate and cationic polyacrylamide were used to investigate the influence of these variables on flocculation. The median particle size and size distribution were examined and the tensile and optical properties influenced by the floc size and ash levels were evaluated. The addition of high concentration C-PAM increased the median particle size. Stirring speeds in the range of 1000 ~ 3000 rpm were used to simulate various turbulent environments, and it was shown that high stirring speeds drastically decreased the floc size. Diluting and low speed stirring the flocculated GCC suspension was effective in keeping the particle size intact without disruption before sheet forming. Larger GCC flocs in the handsheets resulted in better mechanical properties.