Nondestructive testing of IV type hydrogen storage cylinder liner based on rotating water immersion ultrasonic total focusing method detection system
Source abstract
Abstract
The plastic liner of the IV type hydrogen storage cylinders was made of multiple segments using laser welding technology, with a small diameter and wall thickness, making it difficult to detect. At present, there were few detection technologies for the plastic liner of hydrogen storage cylinders. On the basis of considering the structural characteristics and typical defects of plastic liners, this paper integrated ultrasonic total focusing method (TFM) imaging technology, curved structure water immersion interface coupling technology, and multi-dimensional automatic control technology to developed a five axis linkage water immersion TFM rotating ultrasonic C-scan detection system for plastic liners. Based on this system, unfused defects, weld cracking defects, and weld misalignment on the external and internal surfaces of the liner were detected. At the same time, industrial computed tomography (CT) technology was used to calibrate the actual size of the damage. At the same time, the actual size of the damage was calibrated using industrial CT scanning detection technology. This detection system was expected to be applied in the process after the liner was formed and before assembly with the carbon fibre shell, to compensate for the evaluation difficulties caused by high sound attenuation in the overall ultrasonic testing of IV type hydrogen storage cylinders.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques · Flow Measurement and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Zhejiang Academy of Special Equipment Science
Key Laboratory of Special Equipment Safety Testing Technology of Zhejiang Province
Funding
the Science and Technology Program of Zhejiang Provincial Administration for Market Regulation · Research and Development
References (28)
Show source-provided references
1. 10.3390/app1420934810.3390/app14209348 ↗
2. 10.1016/j.ijhydene.2013.07.05810.1016/j.ijhydene.2013.07.058 ↗
3. 10.3390/polym1510225810.3390/polym15102258 ↗
4. 10.1016/j.ijhydene.2016.03.17810.1016/j.ijhydene.2016.03.178 ↗
5. 10.1088/1742-6596/2483/1/01202910.1088/1742-6596/2483/1/012029 ↗
6. Shi Y, Tang P, Miao C, et al. Research on defect detection of fully-wrapped carbon fiber reinforced hydrogen storage cylinder with an aluminum liner by industrial computed tomography[c]//pressure Vessels and Piping Conference. Am Soc Mech Eng. 2022;86199:V005T09A003.
7. 10.1016/j.ijhydene.2019.02.21710.1016/j.ijhydene.2019.02.217 ↗
8. 10.3390/jimaging702002410.3390/jimaging7020024 ↗
9. 10.3390/app1112566710.3390/app11125667 ↗
10. Jin W, Ximing C, Kai Z, et al. Detection system using flexible differential eddy current sensor for non-destructive testing[C]//2023. In: IEEE Far East NDT New Technology & Application Forum (FENDT); Tianjin,China. IEEE; 2023. p. 140–144.
11. Guo P, Li H, Tian Z, et al. Guided wave damage detection in power-plant-tubes by using magnetostrictive transducer arrays. ASME – Pressure Vessels & Piping Conference; Boston, MA; 2015 July.
12. Tian Z, Sun X, Ma L, et al. Non-contact gas accumulation detection in water loaded pipes using guided waves. ASME – Pressure Vessels & Piping Conference; Boston, MA; 2015 July.
13. 10.1016/j.compstruct.2020.11187110.1016/j.compstruct.2020.111871 ↗
14. Brizuela J, Camacho J, Álvarez-Arenas TG, et al. Air-coupled ultrasound inspection of complex aluminium-cfrp components[C]//2016. IEEE International Ultrasonics Symposium (IUS); Tours, France. IEEE; 2016. p. 1–4.
15. 10.1784/insi.2014.56.4.19510.1784/insi.2014.56.4.195 ↗
16. Qing-le Z, Hong L. Ultrasonic penetration c-scan technique forcarbon fiber composite cylinders. Fiber Reinfor Plast/Compo. 2012;4:121–123.
17. Wang Y, Wang J. Research on ultrasonic testing technology for carbon fiber wrapped gas cylinder,2017. International Symposium on Aerospace Advanced Manufacturing Technology; CMES; 2017.
18. 10.1016/j.ijhydene.2021.12.19810.1016/j.ijhydene.2021.12.198 ↗
19. 10.1016/j.ijhydene.2022.09.02810.1016/j.ijhydene.2022.09.028 ↗
20. Miao C, Zhong H, Teng G, et al. Ultrasonic phased array automatic detection on weld seams of plastic liner in type IV hydrogen cylinder. Pressure Vessels and Piping Conference; Bellevue, Washington, USA. American Society of Mechanical Engineers; 2024. Vol. 88513. p. V005T09A005.
21. 10.1007/s10921-021-00796-410.1007/s10921-021-00796-4 ↗
22. Liu L, Luo L, Gao X, et al. Research on vertical crack detection method with multi-mode TFM[C]//2021. IEEE Far East NDT New Technology & Application Forum (FENDT); Kunming, China. IEEE; 2021. p. 68–72.10.1109/FENDT54151.2021.9749650 ↗
23. Farley JM, Nichols RW. Non-Destructive Testing[M]. Elsevier Science; 2017.
24. Sutcliffe M, Weston M, Dutton B, et al. Real-time full matrix capture with auto-focusing of known geometry through dual layered media. In: Proceedings of the NDT 2012 Conference in British Institute of Nondestructive Testing; Northamptonshire, (UK); 2012 Sep 11–13.
25. Robert S, le Jeune L, Prada C, et al. Adaptive ultrasonic imaging with the total focusing method for inspection of complex components immersed in water[c]//qnde conference. Am Inst Phys. 2015;1650(1):1037–1046.
26. 10.1134/S106183092260112X10.1134/S106183092260112X ↗
27. 10.1007/s10921-023-00927-z10.1007/s10921-023-00927-z ↗
28. Shi Y, Tang P, Miao C, et al. Research on defect detection of fully-wrapped carbon fiber reinforced hydrogen storage cylinder with an aluminum liner by industrial computed tomography. In: Proceedings of the. Volume 5: Operations, Applications, and Components; Seismic Engineering; ASME Nondestructive Evaluation, Diagnosis and Prognosis (NDPD) Division; Las Vegas, Nevada, USA; 2022. p. 17–22.