Non-destructive evaluation of a composite honeycomb sandwich panel with in-plane waviness damage using ultrasonic guided waves

Composite honeycomb sandwich structures (CHSS) are often manufactured using an autoclave co-cure process, which can introduce in-plane waviness (IW) damage due to fibre misalignment. Such fibre waviness, whether in-plane or out-of-plane, significantly weakens the strength of these structures. Therefore, developing reliable non-destructive evaluation (NDE) techniques is essential for detecting IW. This study presents an NDE technique utilising ultrasonic guided waves (GW) to identify IW damage in CHSS panels. A numerical model was created using COMSOL Multiphysics, where IW damage is simulated through curvilinear coordinate physics, followed by a time-dependent study of GW propagation. This model simulates local fibre orientation changes due to IW damage, enhancing our understanding of GW interaction with IW. Experimental investigations are performed using contact-type transducers to corroborate the numerical observations. The presence of in-plane waviness causes a reduction in the group velocity of the A0 mode, a characteristic that can be exploited for detecting in-plane fibre waviness in CHSS. Also, parametric studies were performed to examine the effects of IW severity (aspect ratio) and increased IW area on GW characteristics. Finally, a technique for IW damage localisation is demonstrated using a convex hull algorithm based on changes in correlation coefficient values of the A0 mode.