Evaluation of residual stress profiles using the Barkhausen noise effect to verify high performance aerospace bearings
Source abstract
Abstract
Abstract In this paper, we present a non-destructive method for estimating residual stress profiles, based on the Barkhausen noise effect. Validated on several batches of bearings, this method has been shown to be rapid, well suited to industrial imperatives connected to on-line measurement and easily adapted to the circular geometries of the bearing rings. Given the industrial imperative to characterize parts, our method concentrates on stress profiles in the first 60 μm under the surface, in steps of 5 or 10 μm. We show the efficiency of the Barkhausen noise effect for estimating these residual stress profiles in bearing raceways. Our method will make it possible to inspect the homogeneity of surface and subsurface stresses on the bearing rings at any stage of the manufacturing process, regardless of the treatments that have been effected. Keywords: Residual stressBarkhausen noise effectAerospace bearingsHertzian fatigue
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Scientific Measurement and Uncertainty Evaluation · Machine Fault Diagnosis Techniques · Advanced Measurement and Metrology Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Tiitto S · Acta Polytechnica Scandinavica, Applied Physics Series · 1977 · 119 · 1
2. Cullity BD · 1972
3. Pasley, R.L., Barkhausen Effect—An indication of stress,29th National Fall Conference of the American Society for Nondestructive Testing, 1969, Philadelphia, pp. 13–16.
4. 10.1016/0308-9126(87)90331-210.1016/0308-9126(87)90331-2 ↗
5. Gilbert, I.P., Bull, S.J., Evans, J.T., Moorthy, V. and Shaw, B.A., Barkhausen noise study of soft magnetic composites,Conf. Proc. Barkhausen Noise and Micromagnetic Testing-III, ICBM 3, 2001, Tampere, Finlande, pp. 168–173.
6. Shaw, B.A., Hyde, T.R. and Evans, J.T., Detection of grinding damage in hardened gear steels using Barkhausen noise analysis,Conf. Proc. Barkhausen Noise and Micromagnetic Testing-I, ICBM 1, 1988, Hanover, Germany, pp. 187–196.
7. Kwun H · Journal of Magnetism and Magnetic Materials · 1985 · 49 · 23510.1016/0304-8853(85)90153-2 ↗
8. Tiitto, K. and Karvonen, I., Evaluating heat treat defects, grinding burns and stress in steels by Barkhausen noise method,4th European Conference on Non-destructive Testing, 1987, London, September.
9. Tiitto S · 1988
10. Shaw, B.A., Benson, M. and Hofmann, D.A., Calibration of the Barkhausen noise method as a tool for assessing the surface integrity of gear steels,Conf. Proc. Barkhausen Noise and Micromagnetic Testing-II, ICBM 2, 1999, Newcastle, United Kingdom, pp. 129–140.
11. Tiitto K · 1984 · 105
12. Moorty, V., Shaw, B.A., Brimble, K. and Atkins, I., Evaluation of Heat treatment and deformation induced changes in material properties in gears steels using magnetic Barkhausen noise analysis,Conf. Proc. Barkhausen Noise and Micromagnetic Testing-III, ICBM 3, 2001, Tampere, Finland, pp. 63–83.
13. Nierlich, W., Investigations on ground parts using Barkhausen noise XRD and metallographic methods,Conf. Proc. Barkhausen Noise and Micromagnetic Testing-I, ICBM 1, 1998, Hanover, Germany, pp. 125–139.
14. Tönshoff, H.K. and Karpuschewski, B., Residual stress determination of ferromagnetic sheets,Conf. Proc. Barkhausen Noise and Micromagnetic Testing-I, ICBM 1, 1998, Hanover, Germany, pp. 141–154.
15. Lindgren M · Conf. Proc. Barkhausen Noise and Micromagnetic Testing-II, ICBM 2 · 1999 · 25 · 91
16. Tönshoff, H.K., Oberbeck-Spintig, I. and Seegers, H., Micromagnetic quality assurance of metal sheets,Conf. Proc. Barkhausen Noise and Micromagnetic Testing-II, ICBM 2, 1999, Newcastle, United Kingdom, pp. 115–127.
17. Theiner, W.A., Physical basis of micromagnetic methods and sensor systems and their application areas,Conf. Proc. Barkhausen Noise and Micromagnetic Testing-I, ICBM 1, 1998, Hanover, Germany, September, pp. 197–218.
18. Desvaux S · NDT&E Internatinal · 2004 · 37 · 910.1016/S0963-8695(03)00046-X ↗
19. Fix, R.M., Applications of Barkhausen noise analysis (BNA), a review of three cases having industrial significance,Conf. Proc. Barkhausen Noise and Micromagnetic Testing-I, ICBM 1, 1998, Hanover, Germany, September, pp. 51–66.
20. Ogden, W.P., Detection of subsurface tensile stress in an aircraft engine mainshaft bearing using Barkhausen noise,AMS Conference on Practical Applications of Residual Stress Technology, 1991, Indianapolis, Indiana, May.
21. Griffiths, C.A., Closing the loop on product integrity on bearings with engineering source approval, Published by Split Ballbearing, division of MPB Corp., 1989, July.
22. Hillmann, R. “Combined NDT testing of Camshafts”,Conf. Proc. Barkhausen Noise and Micromagnetic Testing-I, ICBM 1, 1998, Hanover, Germany, September, pp. 77–84.
23. Dugeon, A., Characterisation of the Stressonic® shot peening by Barkhausen noise measurement and X-ray diffraction measurements”,Conf. Proc. Barkhausen Noise and Micromagnetic Testing-II, ICBM 2, 1999, Newcastle, United Kingdom, October, pp. 79–89.
24. Grum, J., Zerovnik, P. and Fefer, D., Determination of residual stresses after heat treating and grinding by means of the magnetic Barkhausen noise,Conf. Proc. Barkhausen Noise and Micromagnetic Testing-II, ICBM 2, 1999, Newcastle, United Kingdom, October, pp. 141–152.
25. Friemuth, T. and Mandrysch, T., Micromagnetic in-process surface integrity analysis of ground workpieces,Conf. Proc. Barkhausen Noise and Micromagnetic Testing-II, ICBM 2, 1999, Newcastle, United Kingdom, October, pp. 101–113.
26. Tiitto S · IEEE Transactions on Magnetics · 1975 · 11 · 166610.1109/TMAG.1975.1058960 ↗
27. Barton, J.R., Lankford, J. and Hampton, P.L., Advanced nondestructive testing methods for bearings inspection, SAE Paper No. 720172, Automotive Engineering Congress, 1972, Detroit, MI, January.10.4271/720172 ↗
28. Barton, J.R., Kusenberger, F.N., Hampton, P.L. and Bull, H., Critical Inspection of Bearings Life Extension (CIBLE).Proc. 10th Symposium on NDE, 1975, San Antonio, TX, pp. 310–331, April.