Diffusion coefficient of lithium in artificial graphite, mesocarbon microbeads, and disordered carbon
Source abstract
Abstract
The structures of pyrolytic sugar carbon, resin carbon, artificial graphite and mesocarbon microbeads (MCMBs), and the diffusion coefficient of lithium in them were determined by X-ray diffraction and potential step chronoamperometry measurements. It was found that the diffusion coefficient of lithium was strongly dependent on the degree of discharge and the structure of the carbon an-odes. As the discharge degree increased, the diffusion coefficient of lithium in MCMB anodes decreased from 4.43×10-9 cm2/s to 5.24×10−10 cm2/s. At half discharge, the diffusion coefficients of lithium in sugar carbon, resin carbon, artificial graphite, and MCMB anode were 1.4×10−10 cm2/s, 5.75×10−10 cm2/s, 1.24×10−9 cm2/s, 2.1×10−9 cm2/s, respectively, showing that diffusion of lithium in soft carbons (artificial graphite and MCMBs) was much easier than that in hard carbons such as sugar and resin carbon.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Graphene research and applications · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Mild oxidation treatment of graphite anode for Li-ion batteries10.1007/s11771-005-0202-y ↗
2. A carbon-coated graphite anode for lithium ion secondary batteries
3. The compatibility of electrolytes with the graphitic negative electrode material in lithium ion batteries
4. Carbon hybrids graphite-hard carbon and graphite-coke as negative electrode materials for lithium secondary batteries charge/discharge characteristics
5. Effect of lithium or aluminum substitution on the characteristics
6. Influence of carbon nanotube structure on electrochemical properties of PVA-derived carbon coated Si/carbon nanotube composites
7. The electrochemical capacitance characteristics of activated carbon electrode material with a multi-walled carbon nanotube additive
8. The electrochemical performance of phenolic resin-based activated carbon microbeads II. Preparation and electrochemical performance of activated carbon microbeads as the electrode materials of EDLC
9. Purly hexagonal graphite and the influencee of surface modifications on its electrochemical lithium insertion propertyes
10. Reduction of irreversible capacities of amorphous carbon materials for lithium ion battery anodes by Li2CO3 addition10.1016/j.carbon.2004.01.062 ↗
11. A study of the anode of a lithium ion battery—effect of coating on the capacity loss of natural graphite
12. Si-doped composite carbon as anode of lithium ion batteries
13. Diffusion coefficient of lithium for intercalation in highly oriented pyrolytic graphite
14. Ab initio investingations of lithium diffusion in single-walled carbon nanotubes10.1016/j.chemphys.2003.10.004 ↗
15. The lithium ion diffusion coefficient in graphitized carbon fiber
16. Determination of Li+ diffusion coefficient in graphite by the methode of the ratio of petentio-charge capacity to galvano-charge capacity10.3866/PKU.WHXB20020807 ↗
17. Study on diffusion of hydrogen in AB5 non-stoichiometric hydrogen absorbing alloys
18. Textures in carbon materials
19. Sheng S X., Technology of X-ray Diffraction. Beijing, China: Metallurgical Industry Press, 1986. 314-453