journal article·2026-05-05Open access

Inorganic‐Directed Charge Delocalization Channels: Boosting Uniform Charge Distribution and Rapid Na + Transport for Solid‐State Sodium Metal Batteries

Jiaze Li, Rong Yang, Aoyi Jiang, Xiaobin Li, Qianwei Zhang, Xin Dong, Hongyu Shang, Ying Liu, Yinglin Yan, Yunhua Xu, Jae‐Kwang Kim, Jou‐Hyeon Ahn

Abstract

ABSTRACT Composite polymer electrolytes (CPEs) are promising for all‐solid‐state sodium metal batteries but suffer from low ionic conductivity, which stems from limited Na‐salt dissociation and narrow polymer amorphous domains, as well as sluggish ion transport caused by discontinuous composite interfacial charge‐transfer paths, and poor electrode/electrolyte interfacial stability. This study proposes an original molecular interface engineering strategy: inorganic Zr 4+ induces organic phase reconstruction to build continuous high‐speed ion channels, simultaneously accelerating Na‐salt dissociation and reducing ion migration energy barriers. Zr 4+ directs the oriented reorganization of polar groups (─C≡N) to alleviate Na‐metal anode interfacial passivation, facilitate NaF/Na 3 N‐rich stable solid electrolyte interphase formation, and enable uniform Na deposition. Moreover, Zr─N═C metal‐ligand coordination at the organic/inorganic interface induces interfacial electronic coupling and charge redistribution, promoting fast Na + migration along continuous coordination pathways. The developed CPEs, denoted as polyacrylonitrile‐metal organic framework@polyethylene oxide‐Na[N(SO 2 CF 3 ) 2 ] (PM@PN), show a synergistic interface‐bulk effect that significantly enhances electrolyte performance, as evidenced by a reduced apparent activation energy of 0.027 eV (derived from Vogel–Tammann–Fulcher, VTF fitting above T m ), an enhanced ionic conductivity of 3.52 × 10 −4 S cm −1 , and a Na + transference number of 0.67 at 60°C, along with an expanded electrochemical window of 5.06 V. The Na|PM@PN|Na symmetric cell demonstrates 0.56 mA cm −2 critical current density and stable Na deposition/stripping over 700 h at 0.4 mA cm −2 . Additionally, the assembled Na 3 V 2 (PO 4 ) 3 |PM@PN|Na full cell maintains 93.99% capacity retention after 200 cycles at 0.1 C, confirming PM@PN's applicability in advanced all‐solid‐state sodium metal batteries.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

International Research Center for Composite and Intelligent Manufacturing Technology, Institute of Chemical Power Sources Xi'an University of Technology Xi'an China

School of Materials Science and Engineering Xi'an University of Technology Xi'an China

Sunwoda Electronic Co., Ltd. Shenzhen China

Department of Energy Convergence Engineering Cheongju University Cheongju Republic of Korea

Department of Chemical Engineering Gyeongsang National University Jinju Republic of Korea

Department of Materials Engineering and Convergence Technology Gyeongsang National University Jinju Republic of Korea

Funding

National Natural Science Foundation of China

References (66)

Show source-provided references
1. Sodium Is the New Lithium10.1038/s41560-022-01084-9 ↗
2. A Sodium Superionic Chloride Electrolyte Driven by Paddle Wheel Mechanism for Solid State Batteries10.1038/s41467-025-61738-6 ↗
3. Recent Advanced Development of Artificial Interphase Engineering for Stable Sodium Metal Anodes10.1002/smll.202102250 ↗
4. Ion‐Conductive Gradient Sodiophilic 3D Scaffold Induced Homogeneous Sodium Deposition for Highly Stable Sodium Metal Batteries10.1016/j.nanoen.2022.107202 ↗
5. Graphene Quantum Dots as Sulfiphilic and Lithiophilic Mediator Toward High Stability and Durable Life Lithium‐Sulfur Batteries10.1016/j.jechem.2023.06.030 ↗
6. Morphology, Chemistry, Performance Trident: Insights From Hollow, Mesoporous Carbon Nanofibers for Dendrite‐Free Sodium Metal Batteries10.1016/j.nanoen.2021.106132 ↗
7. Ductile Inorganic Solid Electrolytes for All‐Solid‐State Lithium Batteries10.1021/acs.chemrev.4c00894 ↗
8. Cellulose Acetate Propionate Incorporated PVDF‐HFP Based Polymer Electrolyte Membrane for Lithium Batteries10.1016/j.coco.2022.101226 ↗
9. Ultrafast Laser‐Induced Cathode/Electrolyte Interphase for High‐Voltage Poly(Ethylene Oxide)‐Based Solid Batteries
10. Ion‐Dipole Interaction Regulation Enables High‐Performance Single‐Ion Polymer Conductors for Solid‐State Batteries10.1002/adma.202202143 ↗
11. Heterogeneous Nanodomain Electrolytes for Ultra‐Long‐Life All‐Solid‐State Lithium‐Metal Batteries10.1002/adfm.202204778 ↗
12. Boron Nitride as an “All‐In‐One” Gelator to Immobilize Concentrated Sulfone Electrolyte Towards High Performance Lithium Metal Batteries10.1016/j.ensm.2023.03.031 ↗
13. An Ion‐Released MgI2‐Doped Separator Inducing a Lil‐Containing Solid Electrolyte Interphase for Dendrite‐Free Li Metal Anodes10.1016/j.jechem.2022.08.021 ↗
14. Intermediate Phase Induced in Situ Self‐Reconstruction of Amorphous NASICON for Long‐Life Solid‐State Sodium Metal Batteries10.1039/D4EE01743A ↗
15. Fast Sodium Ion Conductivity in Pristine Na8SnP4‐Synthesis, Structure and Properties of the Two Polymorphs LT‐Na8SnP4 and HT‐Na8SnP410.1002/ange.202419381 ↗
16. Na3–xEr1–xZrxCl6—A Halide‐Based Fast Sodium‐Ion Conductor With Vacancy‐Driven Ionic Transport10.1021/acsaem.0c01870 ↗
17. Temperature‐Adaptive Fluorine in Electrolyte for Lithium‐Metal Batteries at Low Temperatures10.1021/acsenergylett.5c00773 ↗
18. Vertically Heterostructured Solid Electrolytes for Lithium Metal Batteries10.1002/adfm.202201465 ↗
19. Recent Advances and Perspectives on Thin Electrolytes for High‐Energy‐Density Solid‐State Lithium Batteries10.1039/D0EE02714F ↗
20. In‐Situ Coupling Construction of Interface Bridge to Enhance Electrochemical Stability of All Solid‐State Lithium Metal Batteries10.1016/j.jechem.2023.10.025 ↗
21. Designing an Isotropic Epilayer for Stable 4.2 V Solid‐State Na Batteries10.1038/s41560-025-01857-y ↗
22. Inorganic Glass Electrolytes With Polymer‐Like Viscoelasticity10.1038/s41560-023-01356-y ↗
23. Eu3+ Doped Hydroxyapatite Nanowires Enabling Solid‐State Electrolytes With Enhanced Ion Transport10.1016/j.jmst.2023.10.051 ↗
24. Rational Design of a Topological Polymeric Solid Electrolyte for High‐Performance All‐Solid‐State Alkali Metal Batteries10.1038/s41467-022-31792-5 ↗
25. Gentle Haulers of Lithium‐Ion‐Nanomolybdenum Carbide Fillers in Solid Polymer Electrolyte10.1021/acsenergylett.2c00849 ↗
26. Insight Into Prolonged Cycling Life of 4 V All‐Solid‐State Polymer Batteries by a High‐Voltage Stable Binder10.1002/aenm.202002455 ↗
27. A Leaf‐Like Al2O3‐Based Quasi‐Solid Electrolyte With a Fast Li+ Conductive Interface for Stable Lithium Metal Anodes10.1039/D0TA02098B ↗
28. A Novel Super‐Toughness and Self‐Healing Solid Polymer Electrolyte for Solid Sodium Metal Batteries10.1002/adma.202409587 ↗
29. Confining Polymer Electrolyte in MOF for Safe and High‐Performance All‐Solid‐State Sodium Metal Batteries10.1002/ange.202318822 ↗
30. A Novel Composite Solid Electrolyte With Ultrahigh Ion Transference Number and Stability for Solid‐State Sodium Metal Batteries10.1016/j.cej.2024.151989 ↗
31. Flexible, Mechanically Robust, Solid‐State Electrolyte Membrane With Conducting Oxide‐Enhanced 3D Nanofiber Networks for Lithium Batteries10.1021/acs.nanolett.1c01704 ↗
32. Zr‐MOF‐Based Enzyme Mimic Catalytic Membrane for Removal of Organophosphorus Pesticides10.1021/acsanm.3c04870 ↗
33. Crosslinking and Carbonization Processes in PAN Films and Nanofibers10.1016/j.polymdegradstab.2015.11.008 ↗
34. Surface‐Modified Polyacrylonitrile Nanofibres as Supports10.1007/s00289-016-1830-0 ↗
35. Preparation of Amidoxime‐Modified Polyacrylonitrile (PAN‐Oxime) Nanofibers and Their Applications to Metal Ions Adsorption10.1016/j.memsci.2008.05.062 ↗
36. Conformational Structure of Triblock Copolymers by FT‐Raman and FTIR Spectroscopy10.1006/jcis.1998.5897 ↗
37. Generation of Nitrile Groups on Graphites in a Nitrogen RF‐Plasma Discharge10.1016/j.carbon.2014.11.054 ↗
38. Vibrational Spectroscopy Investigation of Defects in Zr‐ and Hf‐UiO‐6610.1039/D2RA03131K ↗
39. IR Linewidth and Intensity Amplifications of Nitrile Vibrations Report Nuclear‐Electronic Couplings and Associated Structural Heterogeneity in Radical Anions10.1039/D1SC03455C ↗
40. Study on the Flame Retardant Properties of Ethoxyimidazole and Polyoxometalates Autocatalytic Phthalonitrile Derivatives for Thermoplastic Polyurethane10.1007/s10853-025-11803-8 ↗
41. A Simple PAN‐Based Fabrication Method for Microstructured Carbon Electrodes for Organic Field‐Effect Transistors10.1016/j.carbon.2015.02.040 ↗
42. Analysis, Prior and After Exposure to Air, of the Chemical Transformations Induced in Polyacrylonitrile Films by 3 keV Proton Beams10.1016/S0168-583X(97)00196-1 ↗
43. A Fast Na‐Ion Conduction Polymer Electrolyte via Triangular Synergy Strategy for Quasi‐Solid‐State Batteries10.1002/anie.202315076 ↗
44. M.Cui “Exploring Ion Dynamics in Solid‐State Electrolytes of Lithium‐ and Sodium‐Ion Batteries Through Solid‐State Nuclear Magnetic Resonance” (PhD diss. McMaster University 2025).
45. Solid‐State 23Na NMR Spectroscopy Studies of Ordered and Disordered Cellulose Nanocrystal Films10.1016/j.ssnmr.2018.12.001 ↗
46. Single‐Ion Conducting Polymer Electrolytes for Solid‐State Lithium‐Metal Batteries: Design, Performance, and Challenges10.1002/aenm.202003836 ↗
47. Optimizing Post‐Synthetic Metal Incorporation in Mixed‐Linker MOFs: Insights From Metalation Studies on Bipyridine‐Containing UiO‐67 Single Crystals10.1039/D4DT01782J ↗
48. Enhanced Photocatalytic Activity of TiO2/UiO‐67 Under Visible‐Light for Aflatoxin B1 Degradation10.1039/D1RA09441F ↗
49. Ring‐Opening Polymerization Reconfigures Polyacrylonitrile Network for Ultra Stable Solid‐State Lithium Metal Batteries10.1002/aenm.202402795 ↗
50. Self‐Assembly via Condensation of Imine or Its N‐Substituted Derivatives10.1021/acs.accounts.3c00475 ↗
51. Anion‐Tethered Single Lithium‐Ion Conducting Polyelectrolytes Through UV‐Induced Free Radical Polymerization for Improved Morphological Stability of Lithium Metal Anodes10.1002/anie.202308309 ↗
52. Composite Solid Electrolytes With Cation Assisted Effect to Enhance the Electrochemical Performance of All Solid‐State Lithium Metal Batteries10.1016/j.ceramint.2025.01.113 ↗
53. High‐Performance Lithium‐Ion Capacitors Based on Porosity‐Regulated Zirconium Metal‐Organic Frameworks10.1002/smll.202005209 ↗
54. Bilateral Covalent Bond‐Bridging Organic‐Inorganic Interfaces for Enhanced Lithium Ion Transport in Composite Solid‐State Electrolyte Membrane10.1016/j.jpowsour.2025.237952 ↗
55. An All‐In‐One Free‐Standing Single‐Ion Conducting Semi‐Solid Polymer Electrolyte for High‐Performance Practical Li Metal Batteries10.1039/D4EE02208D ↗
56. Highly Reversible Sodiation of Tin in Glyme Electrolytes: The Critical Role of SEI and Its Formation Mechanism10.1021/acsami.9b20616 ↗
57. An In‐Situ Formed Stable Interface Layer for High‐Performance Sodium Metal Anode in a Non‐Flammable Electrolyte10.1016/j.ensm.2021.07.012 ↗
58. Dual‐Anionic Coordination Manipulation Induces Phosphorus and Boron‐Rich Gradient Interphase Towards Stable and Safe Sodium Metal Batteries10.1002/anie.202415644 ↗
59. Carbonate Ester‐Based Sodium Metal Battery With High‐Capacity Retention at −50°C Enabled by Weak Solvents and Electrodeposited Anode10.1002/anie.202407075 ↗
60. Electrolyte Design With Dual –C≡N Groups Containing Additives to Enable High‐Voltage Na3V2(PO4)2F3‐Based Sodium‐Ion Batteries10.1021/jacs.4c00702 ↗
61. Optimization Strategies of Na3V2(PO4)2F3 Cathode Materials for Sodium‐Ion Batteries10.1007/s40820-024-01526-x ↗
62. High‐Voltage Cycling Degradation Mechanisms of the NaNi1/3Fe1/3Mn1/3O2 Cathode in Sodium‐Ion Pouch Cells
63. Electrochemical‐Mechanical Coupled Interfacial Degradation Model of Ternary Polymer Composite Cathodes in All‐Solid‐State Batteries10.1016/j.jpowsour.2024.235452 ↗
64. Surface Orientation‐Dependent Adhesion Behavior in Na‐Cathode and Solid‐State Electrolyte Interfaces Using Machine Learning Interatomic Potential10.1016/j.jpowsour.2025.237670 ↗
65. Exploring Electrode/Polymer Electrolyte Interface Chemistry and a Regulating Strategy of Interfacial Stability: A Review10.1039/D4QM00219A ↗
66. Solid‐State Sodium‐Ion Batteries With Composite Polymer Electrolytes and ALD‐Modified Na0.7MnO2 Cathodes10.1016/j.cej.2025.163173 ↗