A 3-GPa ductile martensitic alloy enabled by interface complexes and dislocations
Source abstract
Abstract
Ultrahigh-strength bulk alloys with martensitic structures are essential for heavy-duty applications and infrastructure. However, they often contain small-angle grain boundaries (SAGBs), which enhance ductility but weaken resistance to dislocation motion. This limitation restricts tensile strength to below 2.5 GPa, even when nanoprecipitates or hierarchical architectures are introduced. Here we overcome this limitation by developing a near-single-phase martensitic alloy with a tensile strength exceeding 3 GPa. In the model (Fe49Co40Mo11)99.6B0.3C0.1 (at.%) alloy, cold rolling followed by low-temperature annealing introduces a high density of dislocations and drives Mo, C and B atoms to cosegregate at the SAGBs, forming interface complexes. These complexes stabilize the SAGBs, reinforce barriers to dislocation motion and still permit dislocation transmission across boundaries. As a result, the alloy achieves a tensile yield strength of 3.05 GPa and a fracture elongation of 5.13%, setting a benchmark for ultrahigh-strength, ductile alloys. This simple, scalable process integrates seamlessly with existing manufacturing methods and opens a path to next-generation structural materials.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Intermetallics and Advanced Alloy Properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. Jiang, S. H. et al. Strain hardening mediated by coherent nanoprecipitates in ultrahigh-strength steels. Acta Mater. 213, 116984 (2021).10.1016/j.actamat.2021.116984 ↗
2. Wang, Y. et al. A low-alloy high-carbon martensite steel with 2.6GPa tensile strength and good ductility. Acta Mater. 158, 247–256 (2018).10.1016/j.actamat.2018.07.060 ↗
3. Li, Y. et al. Ductile 2-GPa steels with hierarchical substructure. Science 379, 168–173 (2023).10.1126/science.add7857 ↗
4. Bain, E. C. The nature of martensite. Trans. Am. Inst. Min. Metall. Pet. Eng. 70, 25 (1924).
5. Morsdorf, L., Tasan, C. C., Ponge, D. & Raabe, D. 3D structural and atomic-scale analysis of lath martensite: effect of the transformation sequence. Acta Mater. 95, 366–377 (2015).10.1016/j.actamat.2015.05.023 ↗
6. Morito, S., Yoshida, H., Maki, T. & Huang, X. Effect of block size on the strength of lath martensite in low carbon steels. Mater. Sci. Eng. A 438–440, 237–240 (2006).10.1016/j.msea.2005.12.048 ↗
7. Shamsujjoha, M. Evolution of microstructures, dislocation density and arrangement during deformation of low carbon lath martensitic steels. Mater. Sci. Eng. A 776, 139039 (2020).10.1016/j.msea.2020.139039 ↗
8. Erlings, J. G. & Schapink, F. W. On thein situ relaxation of interphase interfaces. J. Mater. Sci. 15, 381–386 (1980).
9. He, B. B. et al. High dislocation density-induced large ductility in deformed and partitioned steels. Science 357, 1029–1032 (2017).10.1126/science.aan0177 ↗
10. Liu, L. et al. Making ultrastrong steel tough by grain-boundary delamination. Science 368, 1347–1352 (2020).10.1126/science.aba9413 ↗
11. Li, Q. et al. 3 GPa dual-phase stainless steel from synergistic heterogeneous structure and nano-precipitate. Mater. Res. Lett. 13, 207–216 (2024).10.1080/21663831.2024.2438879 ↗
12. Niu, M. et al. Precipitate evolution and strengthening behavior during aging process in a 2.5 GPa grade maraging steel. Acta Mater. 179, 296–307 (2019).10.1016/j.actamat.2019.08.042 ↗
13. Guo, F. et al. Achieving good ductility in 2.1 GPa grade maraging steel. Mater. Sci. Eng. A 890, 145886 (2024).10.1016/j.msea.2023.145886 ↗
14. Pan, Q. et al. Atomic faulting induced exceptional cryogenic strain hardening in gradient cell-structured alloy. Science 382, 185–190 (2023).10.1126/science.adj3974 ↗
15. Hu, J. et al. Grain boundary stability governs hardening and softening in extremely fine nanograined metals. Science 355, 1292–1296 (2017).10.1126/science.aal5166 ↗
16. Zhang, J. et al. Unveiling the unique bifunctionality of L12-structured nanoprecipitates in a FeCoNiAlTi-type high-entropy alloy. Adv. Powder Mater. 2, 100113 (2023).10.1016/j.apmate.2023.100113 ↗
17. Takeuchi, A. & Inoue, A. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element. Mater. Trans. 46, 2817–2829 (2005).10.2320/matertrans.46.2817 ↗
18. Li, Y. J., Ponge, D., Choi, P. & Raabe, D. Atomic scale investigation of non-equilibrium segregation of boron in a quenched Mo-free martensitic steel. Ultramicroscopy 159, 240–247 (2015).10.1016/j.ultramic.2015.03.009 ↗
19. Zhou, Y. et al. Highly printable, strong, and ductile ordered intermetallic alloy. Nat. Commun. 16, 1036 (2025).10.1038/s41467-025-56355-2 ↗
20. Ivanisenko, Y. et al. Bulk nanocrystalline ferrite stabilized through grain boundary carbon segregation. Adv. Eng. Mater. 20, 1800443 (2018).10.1002/adem.201800443 ↗
21. Li, M., Peng, Z., Shang, Y. & Liu, Y. Phase equilibria in the Fe–Mo–Co system: experimental investigation and thermodynamic calculation. Coatings 13, 1215 (2023).10.3390/coatings13071215 ↗
22. Yeh, J. W., Chen, Y. L., Lin, S. J. & Chen, S. K. High-entropy alloys—a new era of exploitation. Mater. Sci. Forum 560, 1–9 (2007).10.4028/www.scientific.net/MSF.560.1 ↗
23. Alberty, R. A. On the derivation of the Gibbs adsorption equation. Langmuir 11, 3598–3600 (1995).10.1021/la00009a052 ↗
24. Gubicza, J. Annealing-induced hardening in ultrafine-grained and nanocrystalline materials. Adv. Eng. Mater. 22, 1900507 (2019).10.1002/adem.201900507 ↗
25. Morsdorf, L. et al. Carbon redistribution in quenched and tempered lath martensite. Acta Mater. 205, 116521 (2021).10.1016/j.actamat.2020.116521 ↗
26. Schweizer, P. et al. Atomic scale volume and grain boundary diffusion elucidated by in situ STEM. Nat. Commun. 14, 7601 (2023).10.1038/s41467-023-43103-7 ↗
27. Li, Y. J., Ponge, D., Choi, P. & Raabe, D. Segregation of boron at prior austenite grain boundaries in a quenched martensitic steel studied by atom probe tomography. Scr. Mater. 96, 13–16 (2015).10.1016/j.scriptamat.2014.09.031 ↗
28. Wang, W., Zhang, S. & He, X. Diffusion of boron in alloys. Acta Metall. Mater. 43, 1693–1699 (1995).10.1016/0956-7151(94)00347-K ↗
29. Schwaab, M. & Pinto, J. C. Optimum reference temperature for reparameterization of the Arrhenius equation. Part 1: problems involving one kinetic constant. Chem. Eng. Sci. 62, 2750–2764 (2007).10.1016/j.ces.2007.02.020 ↗
30. Huang, Y. C., Lai, Y. C., Lin, Y. H. & Wu, S. K. A study on the severely cold-rolled and annealed quaternary equiatomic derivatives from quinary HfNbTaTiZr refractory high entropy alloy. J. Alloys Compd. 855, 157404 (2021).10.1016/j.jallcom.2020.157404 ↗
31. Xu, T. & Cheng, B. Kinetics of non-equilibrium grain-boundary segregation. Prog. Mater. Sci. 49, 109–208 (2004).10.1016/S0079-6425(03)00019-7 ↗
32. Chamakura, J. N. et al. The quantitative relationship between non-linear stress–strain behaviour and dislocation structure in martensitic stainless steel. Acta Mater. 240, 118364 (2022).10.1016/j.actamat.2022.118364 ↗
33. van Liempt, P. & Sietsma, J. A physically based yield criterion I. Determination of the yield stress based on analysis of pre-yield dislocation behaviour. Mater. Sci. Eng. A 662, 80–87 (2016).10.1016/j.msea.2016.03.013 ↗
34. Hull, D. & Bacon, D. J. Introduction to Dislocations 4th edn (Butterworth-Heinemann, 2001).10.1016/B978-075064681-9/50003-1 ↗
35. Read, W. T. & Shockley, W. Dislocation models of crystal grain boundaries. Phys. Rev. 78, 275–289 (1950).10.1103/PhysRev.78.275 ↗
36. Hughes, D. A. & Hansen, N. Microstructure and strength of nickel at large strains. Acta Mater. 48, 2985–3004 (2000).10.1016/S1359-6454(00)00082-3 ↗
37. Chen, S. et al. Real-time observations of TRIP-induced ultrahigh strain hardening in a dual-phase CrMnFeCoNi high-entropy alloy. Nat. Commun. 11, 826 (2020).10.1038/s41467-020-14641-1 ↗
38. Couzinié, J. P. et al. On the room temperature deformation mechanisms of a TiZrHfNbTa refractory high-entropy alloy. Mater. Sci. Eng. A 645, 255–263 (2015).10.1016/j.msea.2015.08.024 ↗
39. Caillard, D. & Martin, J. L. Thermally Activated Mechanisms in Crystal Plasticity 1st edn (Elsevier, 2003).
40. Wei, S. et al. On the plastic deformation of a CoCrFeNiW-C alloy at elevated temperatures: part I. Serrated plastic flow and its latent dynamics. Acta Mater. 242, 118430 (2023).10.1016/j.actamat.2022.118430 ↗
41. Wei, X. et al. Achieving superior low-temperature toughness in high-strength low-carbon steel via controlling lath boundary segregation. J. Mater. Res. Technol. 24, 1524–1536 (2023).10.1016/j.jmrt.2023.03.110 ↗
42. Seol, J. B. et al. Boron doped ultrastrong and ductile high-entropy alloys. Acta Mater. 151, 366–376 (2018).10.1016/j.actamat.2018.04.004 ↗
43. Yoo, J. et al. Effects of solid solution and grain-boundary segregation of Mo on hydrogen embrittlement in 32MnB5 hot-stamping steels. Acta Mater. 207, 116661 (2021).10.1016/j.actamat.2021.116661 ↗
44. Geng, W. T., Freeman, A. J. & Olson, G. B. Influence of alloying additions on grain boundary cohesion of transition metals: first-principles determination and its phenomenological extension. Phys. Rev. B 63, 165415 (2001).10.1103/PhysRevB.63.165415 ↗
45. Geng, W. T. & Freeman, A. J. Effect of Mo and Pd on the grain-boundary cohesion of Fe. Phys. Rev. B 62, 6208–6214 (2000).10.1103/PhysRevB.62.6208 ↗
46. Guo, F. et al. Nanosized austenite and coherent nanoprecipitates making maraging steel strong and ductile. Mater. Sci. Eng. A 902, 146605 (2024).10.1016/j.msea.2024.146605 ↗
47. Zhai, Y. et al. Mechanical anisotropy of ultra strong-and-ductile lamellar dual-phase steel. J. Mater. Res. Technol. 28, 3025–3036 (2024).10.1016/j.jmrt.2023.12.220 ↗
48. Lv, L., Fu, L., Sun, Y. & Shan, A. An investigation on the microstructure and mechanical properties in an ultrafine lamellar martensitic steel processed by heavy warm rolling and tempering. Mater. Sci. Eng. A 731, 369–376 (2018).10.1016/j.msea.2018.06.073 ↗
49. Xu, T. et al. Effect of rolling temperature on the structural refinement and mechanical properties of dual-phase heterostructured low-carbon steel. Metals 12, 115 (2022).10.3390/met12010115 ↗
50. Caballero, F. G., Garcia-Mateo, C. & Miller, M. K. Design of novel bainitic steels: moving from ultrafine to nanoscale structures. JOM 66, 747–755 (2014).10.1007/s11837-014-0908-0 ↗
51. Chen, C.-Y. et al. Interaction between η-Ni3Ti and reversed austenite within Custom 465 stainless steel: experimental evidence and related patents investigation. Mater. Sci. Eng. A 839, 142852 (2022).10.1016/j.msea.2022.142852 ↗
52. Zhu, F., Yin, Y. F. & Faulkner, R. G. Microstructural control of maraging steel C300. Mater. Sci. Technol. 27, 395–405 (2011).10.1179/026708309X12506933873503 ↗
53. Chung, H. et al. Doubled strength and ductility via maraging effect and dynamic precipitate transformation in ultrastrong medium-entropy alloy. Nat. Commun. 14, 145 (2023).10.1038/s41467-023-35863-z ↗
54. Niu, M. C. et al. Atomic-scale understanding of solute interaction effects on grain boundary segregation, precipitation, and fracture of ultrahigh-strength maraging steels. Acta Mater. 253, 118972 (2023).10.1016/j.actamat.2023.118972 ↗
55. Jiang, W. et al. Effects of nanoprecipitates on mechanical properties in an ultra-high strength maraging stainless steel. Mater. Charact. 222, 114837 (2025).10.1016/j.matchar.2025.114837 ↗
56. Niu, M. C. et al. Synergistic alloying effects on nanoscale precipitation and mechanical properties of ultrahigh-strength steels strengthened by Ni3Ti, Mo-enriched, and Cr-rich co-precipitates. Acta Mater. 209, 116788 (2021).10.1016/j.actamat.2021.116788 ↗
57. Li, Y. et al. A new 1.9 GPa maraging stainless steel strengthened by multiple precipitating species. Mater. Des. 82, 56–63 (2015).10.1016/j.matdes.2015.05.042 ↗
58. Jiang, S. et al. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation. Nature 544, 460–464 (2017).10.1038/nature22032 ↗
59. Liu, Y. et al. Evolution of microstructures and mechanical properties with tempering temperature in a novel synergistic precipitation strengthening ultra-high strength steel. Materials 17, 5314 (2024).10.3390/ma17215314 ↗
60. Wang, Z. H. et al. Designing ultrastrong maraging stainless steels with improved uniform plastic strain via controlled precipitation of coherent nanoparticles. J. Mater. Sci. Technol. 93, 60–70 (2021).10.1016/j.jmst.2021.04.011 ↗
61. Leitner, H., Schober, M., Schnitzer, R. & Zinner, S. Strengthening behavior of Fe–Cr–Ni–Al–(Ti) maraging steels. Mater. Sci. Eng. A 528, 5264–5270 (2011).10.1016/j.msea.2011.03.058 ↗
62. Wang, S. et al. Dual nanoprecipitation and nanoscale chemical heterogeneity in a secondary hardening steel for ultrahigh strength and large uniform elongation. J. Mater. Sci. Technol. 185, 245–258 (2024).10.1016/j.jmst.2023.10.048 ↗
63. Wang, Y. et al. Effects of NiAl on precipitation behavior and mechanical properties of M2C strengthened secondary hardening steel. J. Mater. Res. Technol. 35, 3107–3117 (2025).10.1016/j.jmrt.2025.02.002 ↗
64. Yang, B. et al. Achieving an extra-high-strength yet ductile steel by synergistic effects of TRIP and maraging. Mater. Res. Lett. 11, 578–585 (2023).10.1080/21663831.2023.2194910 ↗
65. Wang, L. J. et al. Ultrastrong steel strengthened by multiple shearable nanostructures. J. Mater. Sci. Technol. 161, 245–257 (2023).10.1016/j.jmst.2023.05.001 ↗
66. Kim, B. et al. The influence of silicon in tempered martensite: understanding the microstructure–properties relationship in 0.5–0.6wt.% C steels. Acta Mater. 68, 169–178 (2014).10.1016/j.actamat.2014.01.039 ↗
67. Junkui, L. et al. A medium-C martensite steel with 2.6 GPa tensile strength and large ductility. Scr. Mater. 228, 115327 (2023).10.1016/j.scriptamat.2023.115327 ↗
68. Kim, Y.-K. et al. 2.47 GPa grade ultra-strong 15Co-12Ni secondary hardening steel with superior ductility and fracture toughness. J. Mater. Sci. Technol. 66, 36–45 (2021).10.1016/j.jmst.2020.06.014 ↗
69. Liu, Y. et al. Effects of prior austenite and primary carbides on mechanical properties of a novel 2.5 GPa grade ultra-high strength steel. J. Iron Steel Res. Int. 32, 2064–2075 (2025).10.1007/s42243-024-01379-z ↗
70. Wang, J. et al. Enhanced mechanical properties of a high-carbon martensite steel processed by heavy warm rolling and tempering. Mater. Sci. Eng. A 872, 144958 (2023).10.1016/j.msea.2023.144958 ↗
71. Li, Y. et al. Achieving unprecedented yield strength of 2.2 GPa with high ductility in formed parts using strain-aging. Scr. Mater. 233, 115521 (2023).10.1016/j.scriptamat.2023.115521 ↗
72. Liu, Z. et al. Enhanced strength-ductility synergy in a new 2.2 GPa grade ultra-high strength stainless steel with balanced fracture toughness: elucidating the role of duplex aging treatment. J. Alloys Compd. 928, 167135 (2022).10.1016/j.jallcom.2022.167135 ↗
73. Yuzbekova, D., Dudko, V., Kniaziuk, T. & Kaibyshev, R. Tempering behavior of an ultra-high-strength steel with 1.6 wt% Si at low to medium temperatures. Mater. Sci. Eng. A 896, 146264 (2024).10.1016/j.msea.2024.146264 ↗
74. Wu, B. et al. Constructing a heterogeneous microstructure in the CoCrFeNi-based high entropy alloy to obtain a superior strength-ductility synergy. Mater. Sci. Eng. A 886, 145669 (2023).10.1016/j.msea.2023.145669 ↗
75. Man, J. et al. The superior strength-ductility combination of a (Ni2FeCoCr)88.25-Al5Ti3W1.5Mo1.5Nb0.75 high entropy alloy enhanced with the heterogeneous microstructure via thermo-mechanical processing. Mater. Sci. Eng. A 858, 144137 (2022).10.1016/j.msea.2022.144137 ↗
76. Zhou, S. et al. A remarkable toughening high-entropy-alloy wire with a bionic bamboo fiber heterogeneous structure. Scr. Mater. 226, 115234 (2023).10.1016/j.scriptamat.2022.115234 ↗
77. Li, X. et al. Influence of Ti addition on the precipitation behavior and mechanical properties of Ni-7.9Cr-5.9W-22.2Mo superalloy. J. Alloys Compd. 946, 169277 (2023).10.1016/j.jallcom.2023.169277 ↗
78. Amar, A. et al. Ultra-strong and ductile medium entropy alloy with a dual heterogeneous microstructure. Acta Mater. 284, 120645 (2024).10.1016/j.actamat.2024.120645 ↗
79. Liu, L., Zhang, Y. & Zhang, Z. Achieving ultrahigh strength and ductility via high-density nanoprecipitates triggering multiple deformation mechanisms in a dual-aging high-entropy alloy with precold deformation. J. Mater. Sci. Technol. 205, 27–41 (2025).10.1016/j.jmst.2024.03.034 ↗
80. Li, A. X. et al. Pursuing ultrahigh strength–ductility CoCrNi-based medium-entropy alloy by low-temperature pre-aging. J. Mater. Sci. Technol. 220, 115–128 (2025).10.1016/j.jmst.2024.09.025 ↗
81. Kwon, H. et al. High-density nanoprecipitates and phase reversion via maraging enable ultrastrong yet strain-hardenable medium-entropy alloy. Acta Mater. 248, 118810 (2023).10.1016/j.actamat.2023.118810 ↗
82. Wei, S. & Tasan, C. C. On the plastic deformation of a CoCrFeNiW-C alloy at elevated temperatures: part II. Grain boundary sliding and damage mechanisms. Acta Mater. 252, 118898 (2023).10.1016/j.actamat.2023.118898 ↗
83. Dippel, A.-C. et al. Beamline P02.1 at PETRA III for high-resolution and high-energy powder diffraction. J. Synchrotron Rad. 22, 675–687 (2015).10.1107/S1600577515002222 ↗
84. Ma, Y. et al. Phase boundary segregation-induced strengthening and discontinuous yielding in ultrafine-grained duplex medium-Mn steels. Acta Mater. 200, 389–403 (2020).10.1016/j.actamat.2020.09.007 ↗
85. Shen, J. et al. Evolution of microstructure and deformation mechanisms in a metastable Fe42Mn28Co10Cr15Si5 high entropy alloy: a combined in-situ synchrotron X-ray diffraction and EBSD analysis. Mater. Des. 238, 112662 (2024).10.1016/j.matdes.2024.112662 ↗