Flexible fibre-shaped fuel cells with gel-mediated internal pressure encapsulation
Source abstract
Abstract
The development of flexible fuel cells has been hindered by the rigid components and stringent requirements for pressure encapsulation and fuel sealing. Here we report an adaptive internal pressure encapsulation strategy that leverages the dynamic swelling behaviour of woven cotton fibres enclosed in a gel matrix in methanol. This strategy achieves simultaneous interfacial self-reinforcement and pressure modulation, enabling the fabrication of fibre-shaped direct methanol fuel cells. These flexible fuel cells operate across a broad temperature range, from -22 °C to 70 °C, showcasing cuttability, water resistance and fast refuelling capabilities, with full refuelling being achieved within 1 min. Furthermore, the fuel cells maintain consistent discharge performance, even after enduring 2,000 continuous flexing cycles. With an energy density of 161.36 Wh kg-1, these fibre-shaped direct methanol fuel cells surpass the energy densities of typical fibre-based power systems. This technology mitigates many of the technical challenges related to the lightweight and flexible application of fuel cells or fuel cell stacks for powering high-energy flexible devices.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advanced battery technologies research · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Li, Y. et al. Flexible silicon solar cells with high power-to-weight ratios. Nature 626, 105–110 (2024).10.1038/s41586-023-06948-y ↗
2. Pacchioni, G. Sustainable flexible supercapacitors. Nat. Rev. Mater. 7, 844 (2022).10.1038/s41578-022-00508-y ↗
3. Lu, C. et al. High-performance fibre battery with polymer gel electrolyte. Nature 629, 86–91 (2024).10.1038/s41586-024-07343-x ↗
4. Tian, Z. et al. Ultrafast rechargeable Zn micro-batteries endowing a wearable solar charging system with high overall efficiency. Energy Environ. Sci. 14, 1602–1611 (2021).10.1039/D0EE03623D ↗
5. Wang, Q. et al. Fast-charge high-voltage layered cathodes for sodium-ion batteries. Nat. Sustain. 7, 338–347 (2024).10.1038/s41893-024-01266-1 ↗
6. Chen, C. et al. Functional fiber materials to smart fiber devices. Chem. Rev. 123, 613–662 (2023).10.1021/acs.chemrev.2c00192 ↗
7. Wang, Y. et al. Flexible fuel cells: a prospective review. Energy Rev. 3, 100099 (2024).10.1016/j.enrev.2024.100099 ↗
8. Yang, Y. et al. Towards flexible fuel cells: development, challenge and prospect. Appl. Therm. Eng. 203, 117937 (2022).10.1016/j.applthermaleng.2021.117937 ↗
9. Lee, K.-S., Spendelow, J. S., Choe, Y.-K., Fujimoto, C. & Kim, Y. S. An operationally flexible fuel cell based on quaternary ammonium-biphosphate ion pairs. Nat. Energy 1, 16120 (2016).10.1038/nenergy.2016.120 ↗
10. Shi, Q. et al. Methanol tolerance of atomically dispersed single metal site catalysts: mechanistic understanding and high-performance direct methanol fuel cells. Energy Environ. Sci. 13, 3544–3555 (2020).10.1039/D0EE01968B ↗
11. Fan, L. et al. Towards ultralow platinum loading proton exchange membrane fuel cells. Energy Environ. Sci. 16, 1466–1479 (2023).10.1039/D2EE03169H ↗
12. Xia, Z., Zhang, X., Sun, H., Wang, S. & Sun, G. Recent advances in multi-scale design and construction of materials for direct methanol fuel cells. Nano Energy 65, 104048 (2019).10.1016/j.nanoen.2019.104048 ↗
13. Develos-Bagarinao, K., Ishiyama, T., Kishimoto, H., Shimada, H. & Yamaji, K. Nanoengineering of cathode layers for solid oxide fuel cells to achieve superior power densities. Nat. Commun. 12, 3979 (2021).10.1038/s41467-021-24255-w ↗
14. Yu, F. et al. Vertical-graphene-reinforced titanium alloy bipolar plates in fuel cells. Adv. Mater. 34, 2110565 (2022).10.1002/adma.202110565 ↗
15. Wan, L. et al. Oriented intergrowth of the catalyst layer in membrane electrode assembly for alkaline water electrolysis. Nat. Commun. 13, 7956 (2022).10.1038/s41467-022-35603-9 ↗
16. Li, C. et al. Unraveling the core of fuel cell performance: engineering the ionomer/catalyst interface. Energy Environ. Sci. 16, 2977–2990 (2023).10.1039/D2EE03553G ↗
17. Song, W. et al. Effect of polytetrafluoroethylene distribution in the gas diffusion layer on water flooding in proton exchange membrane fuel cells. Chin. J. Catal. 35, 468–473 (2014).10.1016/S1872-2067(14)60014-0 ↗
18. Csoklich, C., Schmidt, T. J. & Büchi, F. N. High performance gas diffusion layers with added deterministic structures. Energy Environ. Sci. 15, 1293–1306 (2022).10.1039/D1EE03246A ↗
19. Yu, Y. et al. The construction of integrated Si-based micro proton exchange membrane fuel cells with improved performances. Nano Energy 61, 604–610 (2019).10.1016/j.nanoen.2019.05.014 ↗
20. Sun, S. et al. Flexible all-solid-state direct methanol fuel cells with high specific power density. Small 19, 2205835 (2023).10.1002/smll.202205835 ↗
21. Zou, S. et al. Highly safe, durable, adaptable, and flexible fuel cell using gel/sponge composite material. Adv. Energy Mater. 12, 2103178 (2022).10.1002/aenm.202103178 ↗
22. Hwang, W., Kim, S., Ahn, C.-Y., Cho, Y.-H. & Sung, Y.-E. Origami-based flexible and simple tubular polymer electrolyte membrane fuel cell stack. ACS Energy Lett. 6, 3195–3202 (2021).10.1021/acsenergylett.1c01460 ↗
23. Kwon, C. H. et al. High-power biofuel cell textiles from woven biscrolled carbon nanotube yarns. Nat. Commun. 5, 3928 (2014).10.1038/ncomms4928 ↗
24. Lee, K. I., Lee, S. W., Park, M. S. & Chu, C. N. The development of air-breathing proton exchange membrane fuel cell (PEMFC) with a cylindrical configuration. Int. J. Hydrog. Energy 35, 11844–11854 (2010).10.1016/j.ijhydene.2010.08.105 ↗
25. Sadiq Al-Baghdadi, M. A. R. Three-dimensional computational fluid dynamics model of a tubular-shaped PEM fuel cell. Renew. Energy 33, 1334–1345 (2008).10.1016/j.renene.2007.06.020 ↗
26. Sim, H. J. et al. Stretchable fiber biofuel cell by rewrapping multiwalled carbon nanotube sheets. Nano Lett. 18, 5272–5278 (2018).10.1021/acs.nanolett.8b02256 ↗
27. Kreuer, K.-D., Rabenau, A. & Weppner, W. Vehicle mechanism, a new model for the interpretation of the conductivity of fast proton conductors. Angew. Chem. Int. Ed. 21, 208–209 (1982).10.1002/anie.198202082 ↗
28. Agmon, N. The Grotthuss mechanism. Chem. Phys. Lett. 244, 456–462 (1995).10.1016/0009-2614(95)00905-J ↗
29. Borup, R. et al. Scientific aspects of polymer electrolyte fuel cell durability and degradation. Chem. Rev. 107, 3904–3951 (2007).10.1021/cr050182l ↗
30. Ding, R. et al. Recent progress in the preparation and performance of protective coatings on metal bipolar plates of proton exchange membrane fuel cells—a review. Appl. Mater. Today 42, 102556 (2025).10.1016/j.apmt.2024.102556 ↗
31. Mukoyama, Y. & Mori, S. Combination of size exclusion and adsorption phenomena on a hydrophilic polymer gel column using organic solvents. J. Liq. Chromatogr. Relat. Technol. 12, 1417–1430 (1989).10.1080/01483918908049514 ↗
32. Sheng, S. W., Lei, L. I. & Xin, W. Y. Study on the methanol permeability in polyacrylamide solid gel memberanes. Sci. Technol. Chem. Ind. 11, 15–18 (2003).
33. Zhang, Y. et al. Atomically deviated Pd-Te nanoplates boost methanol-tolerant fuel cells. Sci. Adv. 6, eaba9731 (2020).10.1126/sciadv.aba9731 ↗
34. Wang, H. et al. Failure mechanisms and strategies toward flexible zinc-air batteries. Adv. Funct. Mater. 34, 2407347 (2024).10.1002/adfm.202407347 ↗
35. Wen, Q. et al. A recyclable standalone microporous layer with interpenetrating network for sustainable fuel cells. Adv. Mater. 35, 2301504 (2023).10.1002/adma.202301504 ↗
36. Galizia, M., Paul, D. R. & Freeman, B. D. Liquid methanol sorption, diffusion and permeation in charged and uncharged polymers. Polymer 102, 281–291 (2016).10.1016/j.polymer.2016.09.010 ↗
37. Zou, X. et al. Diffusion behaviors of ethanol and water through g–C3N4–based membranes: insights from molecular dynamics simulation. J. Membr. Sci. 585, 81–89 (2019).10.1016/j.memsci.2019.05.031 ↗