Free-space direct nanoscale 3D printing of metals and alloys enabled by two-photon decomposition and ultrafast optical trapping
Source abstract
Abstract
Nanoscale three-dimensional (3D) printing of metals and alloys has faced challenges in speed, miniaturization and deficiency in material properties. Traditional nanomanufacturing relies on lithographic methods with material constraints, limited resolution and slow layer-by-layer processing. This work introduces polymer-free techniques using two-photon decomposition and optical force trapping for free-space direct 3D printing of metals, metal oxides and multimetallic alloys with resolutions beyond optical limits. This method involves the two-photon decomposition of metal atoms from precursors, rapid assembly into nanoclusters via optical forces and ultrafast laser sintering, yielding dense, smooth nanostructures. Enhanced near-field optical forces from laser-induced localized surface plasmon resonance facilitate nanocluster aggregation. Our approach eliminates the need for organic materials, layer-by-layer printing and complex post-processing. Printed Mo nanowires show an excellent mechanical performance, closely resembling the behaviour of single crystals, while Mo-Co-W alloy nanowires outperform Mo nanowires. This innovation promises the customizable 3D nanoprinting of high-quality metals and metal oxides, impacting nanoelectronics, nanorobotics and advanced chip manufacturing.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nonlinear Optical Materials Studies · Nanofabrication and Lithography Techniques · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Zheng, X. Y. et al. Multiscale metallic metamaterials. Nat. Mater. 15, 1100–1106 (2016).10.1038/nmat4694 ↗
2. Blasco, E. et al. Fabrication of conductive 3D gold-containing microstructures via direct laser writing. Adv. Mater. 28, 3592–3595 (2016).10.1002/adma.201506126 ↗
3. Ren, Y. et al. Synthesis of orthogonally assembled 3D cross-stacked metal oxide semiconducting nanowires. Nat. Mater. 19, 203–211 (2020).10.1038/s41563-019-0542-x ↗
4. Kalinin, S. V. & Spaldin, N. A. Functional ion defects in transition metal oxides. Science 341, 858–859 (2013).10.1126/science.1243098 ↗
5. Rothschild, M. Projection optical lithography. Mater. Today 8, 18–24 (2005).10.1016/S1369-7021(05)00698-X ↗
6. Kim, F. et al. Direct ink writing of three-dimensional thermoelectric microarchitectures. Nat. Electron. 4, 579–587 (2021).10.1038/s41928-021-00622-9 ↗
7. Park, Y. G., An, H. S., Kim, J. Y. & Park, J. U. High-resolution, reconfigurable printing of liquid metals with three-dimensional structures. Sci. Adv. 5, aaw2844 (2019).10.1126/sciadv.aaw2844 ↗
8. Visser, C. W. et al. Toward 3D printing of pure metals by laser-induced forward transfer. Adv. Mater. 27, 4087–4092 (2015).10.1002/adma.201501058 ↗
9. Seol, S. K. et al. Electrodeposition-based 3D printing of metallic microarchitectures with controlled internal structures. Small 11, 3896–3902 (2015).10.1002/smll.201500177 ↗
10. Madden, J. D. & Hunter, I. W. Three-dimensional microfabrication by localized electrochemical deposition. J. Microelectromec. Syst. 5, 24–32 (1996).10.1109/84.485212 ↗
11. Xu, J. K., Ren, W. F., Lian, Z. X., Yu, P. & Yu, H. D. A review: development of the maskless localized electrochemical deposition technology. Int. J. Adv. Manuf. Technol. 110, 1731–1757 (2020).10.1007/s00170-020-05799-5 ↗
12. El-Giar, E. M., Said, R. A., Bridges, G. E. & Thomson, D. J. Localized electrochemical deposition of copper microstructures. J. Electrochem. Soc. 147, 586 (2000).10.1149/1.1393237 ↗
13. Ren, W. F. et al. Localized electrodeposition micro additive manufacturing of pure copper microstructures. Int. J. Extrem. Manuf. 4, 015101 (2022).10.1088/2631-7990/ac3963 ↗
14. Reiser, A. et al. Multi-metal electrohydrodynamic redox 3D printing at the submicron scale. Nat. Commun. 10, 1853 (2019).10.1038/s41467-019-09827-1 ↗
15. Menetrey, M. et al. Targeted additive micromodulation of grain size in nanocrystalline copper nanostructures by electrohydrodynamic redox 3D printing. Small 18, 2205302 (2022).10.1002/smll.202205302 ↗
16. Wang, S., Zhou, Z., Li, B., Wang, C. & Liu, Q. Progresses on new generation laser direct writing technique. Mater. Today Nano 16, 100142 (2021).10.1016/j.mtnano.2021.100142 ↗
17. Liu, X. et al. Capillary-force-driven self-assembly of 4D-printed microstructures. Adv. Mater. 33, e2100332 (2021).10.1002/adma.202100332 ↗
18. Ma, Z. C. et al. Femtosecond laser programmed artificial musculoskeletal systems. Nat. Commun. 11, 4536 (2020).
19. Meza, L. R., Das, S. & Greer, J. R. Strong, lightweight, and recoverable three-dimensional ceramic nanolattices. Science 345, 1322–1326 (2014).10.1126/science.1255908 ↗
20. Kotz, F. et al. Two-photon polymerization of nanocomposites for the fabrication of transparent fused silica glass microstructures. Adv. Mater. 33, e2006341 (2021).10.1002/adma.202006341 ↗
21. Wen, X. et al. 3D-printed silica with nanoscale resolution. Nat. Mater. 20, 1506–1511 (2021).10.1038/s41563-021-01111-2 ↗
22. Cao, Y. Y., Takeyasu, N., Tanaka, T., Duan, X. M. & Kawata, S. 3D metallic nanostructure fabrication by surfactant-assisted multiphoton-induced reduction. Small 5, 1144–1148 (2009).10.1002/smll.200801179 ↗
23. Xu, B. B. et al. Flexible nanowiring of metal on nonplanar substrates by femtosecond-laser-induced electroless plating. Small 6, 1762–1766 (2010).10.1002/smll.201000511 ↗
24. Liu, S.-F. et al. 3D nanoprinting of semiconductor quantum dots by photoexcitation-induced chemical bonding. Science 377, 1112–1116 (2022).10.1126/science.abo5345 ↗
25. Anisimov, S. I., Kapeliovich, B. L. & Perel'man, T. L. Electron emission from metal surfaces exposed to ultrashort laser pulses. Sov. Phys. J. Exp. Theor. Phys. 39, 375–377 (1974).
26. Buffat, P. & Borel, J. P. Size effect on the melting temperature of gold particles. Phys. Rev. A 13, 2287–2298 (1976).10.1103/PhysRevA.13.2287 ↗
27. Lai, S. L., Guo, J. Y., Petrova, V., Ramanath, G. & Allen, L. H. Size-dependent melting properties of small tin particles: nanocalorimetric measurements. Phys. Rev. Lett. 77, 99–102 (1996).10.1103/PhysRevLett.77.99 ↗
28. Zhang, M. et al. Size-dependent melting point depression of nanostructures: nanocalorimetric measurements. Phys. Rev. B 62, 10548–10557 (2000).10.1103/PhysRevB.62.10548 ↗
29. Belonoshko, A. B. et al. Molybdenum at high pressure and temperature: melting from another solid phase. Phys. Rev. Lett. 100, 135701 (2008).10.1103/PhysRevLett.100.135701 ↗
30. Das, R., Deo, M., Mukherjee, J. & Rao, M. S. R. Strain induced FCC to BCC structural change in sputtered molybdenum thin films. Surf. Coat. Technol. 353, 292–299 (2018).10.1016/j.surfcoat.2018.08.065 ↗
31. Bosnell, J. R. & Voisey, U. C. The effect of deposition parameters on the structure and resistivity of molybdenum films. Thin Solid Films 6, 107–111 (1970).10.1016/0040-6090(70)90067-2 ↗
32. Denbigh, P. N. & Marcus, R. B. Structure of very thin tantalum and molybdenum films. J. Appl. Phys. 37, 4325–4330 (2004).10.1063/1.1708037 ↗
33. Wang, S. J. et al. Deformation-induced structural transition in body-centred cubic molybdenum. Nat. Commun. 5, 3433 (2014).10.1038/ncomms4433 ↗
34. Kitakami, O., Sato, H., Shimada, Y., Sato, F. & Tanaka, M. Size effect on the crystal phase of cobalt fine particles. Phys. Rev. B 56, 13849–13854 (1997).10.1103/PhysRevB.56.13849 ↗
35. Shin, D. et al. Comparison of different tungsten precursors for preparation of tungsten nanopowder by RF induction thermal plasma. Int. J. Refract. Met. Hard Mat. 86, 104995 (2020).10.1016/j.ijrmhm.2019.104995 ↗
36. Redel, E., Thomann, R. & Janiak, C. Use of ionic liquids (ILs) for the IL-anion size-dependent formation of Cr, Mo and W nanoparticles from metal carbonyl M(CO)6 precursors. Chem. Commun. 2008, 1789–1791 (2008).10.1039/b718055a ↗
37. Reiser, A. et al. Metals by micro-scale additive manufacturing: comparison of microstructure and mechanical properties. Adv. Funct. Mater. 30, 1910491 (2020).10.1002/adfm.201910491 ↗
38. Kim, J. Y. & Greer, J. R. Size-dependent mechanical properties of molybdenum nanopillars. Appl. Phys. Lett. 93, 101916 (2008).10.1063/1.2979684 ↗
39. Schneider, A. S., Clark, B. G., Frick, C. P., Gruber, P. A. & Arzt, E. Effect of orientation and loading rate on compression behavior of small-scale Mo pillars. Mater. Sci. Eng. A 508, 241–246 (2009).10.1016/j.msea.2009.01.011 ↗
40. Huang, L. et al. A new regime for mechanical annealing and strong sample-size strengthening in body centred cubic molybdenum. Nat. Commun. 2, 547 (2011).
41. Lowry, M. B. et al. Achieving the ideal strength in annealed molybdenum nanopillars. Acta Mater. 58, 5160–5167 (2010).10.1016/j.actamat.2010.05.052 ↗
42. Oehlerking, F., Stawovy, M. T., Ohm, S. & Imandoust, A. Microstructural characterization and mechanical properties of additively manufactured molybdenum and molybdenum alloys. Int. J. Refract. Met. Hard Mater. 109, 105971 (2022).10.1016/j.ijrmhm.2022.105971 ↗
43. Kim, J.-Y., Jang, D. & Greer, J. R. Crystallographic orientation and size dependence of tension–compression asymmetry in molybdenum nano-pillars. Int. J. Plast. 28, 46–52 (2012).10.1016/j.ijplas.2011.05.015 ↗
44. Kim, J.-Y., Jang, D. & Greer, J. R. Tensile and compressive behavior of tungsten, molybdenum, tantalum and niobium at the nanoscale. Acta Mater. 58, 2355–2363 (2010).10.1016/j.actamat.2009.12.022 ↗
45. Kim, J.-Y. & Greer, J. R. Tensile and compressive behavior of gold and molybdenum single crystals at the nano-scale. Acta Mater. 57, 5245–5253 (2009).10.1016/j.actamat.2009.07.027 ↗
46. Chaudhari, P. & Turnbull, D. Structure and properties of metallic glasses. Science 199, 11–21 (1978).10.1126/science.199.4324.11 ↗
47. Wang, W. H. The elastic properties, elastic models and elastic perspectives of metallic glasses. Prog. Mater. Sci. 57, 487–656 (2012).10.1016/j.pmatsci.2011.07.001 ↗
48. Chen, N. et al. Formation and properties of Au-based nanograined metallic glasses. Acta Mater. 59, 6433–6440 (2011).10.1016/j.actamat.2011.07.007 ↗