Solution-processable polytriazoles from spirocyclic monomers for membrane-based hydrocarbon separations
Source abstract
Abstract
The thermal distillation of crude oil mixtures is an energy-intensive process, accounting for nearly 1% of global energy consumption. Membrane-based separations are an appealing alternative or tandem process to distillation due to intrinsic energy efficiency advantages. We developed a family of spirocyclic polytriazoles from structurally diverse monomers for membrane applications. The resulting polymers were prepared by a convenient step-growth method using copper-catalysed azide-alkyne cycloaddition, providing very fast reaction rates, high molecular weights and solubilities in common organic solvents and non-interconnected microporosity. Fractionation of whole Arabian light crude oil and atmospheric tower bottom feeds using these materials enriched the low-boiling-point components and removed trace heteroatom and metal impurities (comparable performance with the lighter feed as the commercial polyimide, Matrimid), demonstrating opportunities to reduce the energy cost of crude oil distillation with tandem membrane processes. Membrane-based molecular separation under these demanding conditions is made possible by high thermal stability and a moderate level of dynamic chain mobility, leading to transient interconnections between micropores, as revealed by the calculations of static and swollen pore structures.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Membrane Separation and Gas Transport · Fuel Cells and Related Materials · Covalent Organic Framework Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. International Energy Agency. World Balance IEA Sankey Diagram (2018).
2. Sholl, D. S. & Lively, R. P. Seven chemical separations to change the world. Nature 532, 435–437 (2016).10.1038/532435a ↗
3. Marchetti, P., Peeva, L. & Livingston, A. The selectivity challenge in organic solvent nanofiltration: membrane and process solutions. Annu. Rev. Chem. Biomol. Eng. 8, 473–497 (2017).10.1146/annurev-chembioeng-060816-101325 ↗
4. Bye, K. P. et al. Pure and mixed fluid sorption and transport in Celazole® polybenzimidazole: effect of plasticization. J. Membr. Sci. 580, 235–247 (2019).10.1016/j.memsci.2019.03.031 ↗
5. McKeown, N. B. & Budd, P. M. Polymers of intrinsic microporosity (PIMs): organic materials for membrane separations, heterogeneous catalysis and hydrogen storage. Chem. Soc. Rev. 35, 675–683 (2006).10.1039/b600349d ↗
6. Cook, M., Gaffney, P. R. J., Peeva, L. G. & Livingston, A. G. Roll-to-roll dip coating of three different PIMs for organic solvent nanofiltration. J. Membr. Sci. 558, 52–63 (2018).10.1016/j.memsci.2018.04.046 ↗
7. Jue, M. L., McKay, C. S., McCool, B. A., Finn, M. G. & Lively, R. P. Effect of nonsolvent treatments on the microstructure of PIM-1. Macromolecules 48, 5780–5790 (2015).10.1021/acs.macromol.5b01507 ↗
8. Thompson, K. A. et al. N-Aryl-linked spirocyclic polymers for membrane separations of complex hydrocarbon mixtures. Science 369, 310–315 (2020).10.1126/science.aba9806 ↗
9. Chisca, S. et al. Polytriazole membranes with ultrathin tunable selective layer for crude oil fractionation. Science 376, 1105–1110 (2020).10.1126/science.abm7686 ↗
10. Li, S. Y. et al. Hydrophobic polyamide nanofilms provide rapid transport for crude oil separation. Science 377, 1555–1561 (2022).10.1126/science.abq0598 ↗
11. Kolb, H. C., Finn, M. G. & Sharpless, K. B. Click chemistry: diverse chemical function from a few good reactions. Angew. Chem. Int. Ed. 40, 2004–2021 (2001).10.1002/1521-3773(20010601)40:11<2004::AID-ANIE2004>3.0.CO;2-5 ↗
12. Hawker, C. J., Fokin, V. V., Finn, M. G. & Sharpless, K. B. Bringing efficiency to materials synthesis: the philosophy of click chemistry. Aust. J. Chem. 60, 381–383 (2007).10.1071/CH07107 ↗
13. Kantaria, T. et al. New 1,2,3-triazole containing polyesters via click step-growth polymerization and nanoparticles made of them. Int. J. Polym. Sci. 2018, 6798258 (2018).10.1155/2018/6798258 ↗
14. Zhou, X. et al. Synthesis and characterization of novel polytriazoleimides by CuAAC step-growth polymerization. Polym. J. 42, 216–222 (2010).10.1038/pj.2009.337 ↗
15. Binauld, S. et al. Kinetic study of copper(i)‐catalyzed click chemistry step‐growth polymerization. J. Polym. Sci. A Polym. Chem. 46, 5506–5517 (2008).10.1002/pola.22871 ↗
16. Huang, D., Liu, Y., Qin, A. & Tang, B. Z. Structure–property relationship of regioregular polytriazoles produced by ligand-controlled regiodivergent Ru(ii)-catalyzed azide–alkyne click polymerization. Macromolecules 52, 1985–1992 (2019).10.1021/acs.macromol.8b02671 ↗
17. Gonda, Z. & Novák, Z. Highly active copper-catalysts for azide-alkyne cycloaddition. Dalton Trans. 39, 726–729 (2010).10.1039/B920790M ↗
18. Kislukhin, A. A., Hong, V. P., Breitenkamp, K. E. & Finn, M. G. Relative performance of alkynes in copper-catalyzed azide-alkyne cycloaddition. Bioconjug. Chem. 24, 684–689 (2013).10.1021/bc300672b ↗
19. Rodionov, V. O., Presolski, S. I., Gardinier, S., Lim, Y. H. & Finn, M. G. Benzimidazole and related ligands for Cu-catalyzed azide-alkyne cycloaddition. J. Am. Chem. Soc. 129, 12696–12704 (2007).10.1021/ja072678l ↗
20. McCool, B. A., Joshi, Y. V., Bhandari, D. A., Garcia, R. & Partridge, R. D. Methods for separating wax products from hydrocarbon feedstreams. US patent 11,186,788 (2019).
21. Villalanti, D. C., Fuchs, K. A. & Dowling, D. C. in Encyclopedia of Analytical Chemistry: Applications, Theory and Instrumentation (John Wiley & Sons, 2018).
22. Prado, G. H. C., Rao, Y. & de Klerk, A. Nitrogen removal from oil: a review. Energy Fuels 31, 14–36 (2016).10.1021/acs.energyfuels.6b02779 ↗
23. Javadli, R. & de Klerk, A. Desulfurization of heavy oil. Appl. Petrochem. Res. 1, 3–19 (2012).10.1007/s13203-012-0006-6 ↗
24. Ali, M. F. & Abbas, S. A review of methods for the demetallization of residual fuel oils. Fuel Process. Technol. 87, 573–584 (2006).10.1016/j.fuproc.2006.03.001 ↗
25. McCool, B. A., Bhandari, D. A. & Joshi, Y. V. Boiling free fractionation of hydrocarbon steams utilizing a membrane cascade. US patent 11,084,985 (2019).
26. Hart, K. E., Springmeier, J. M., McKeown, N. B. & Colina, C. M. Simulated swelling during low-temperature N2 adsorption in polymers of intrinsic microporosity. Phys. Chem. Chem. Phys. 15, 20161–20169 (2013).10.1039/C3CP53402B ↗
27. Abbott, L. J., Hart, K. E. & Colina, C. M. Polymatic: a generalized simulated polymerization algorithm for amorphous polymers. Theor. Chem. Acc. 132, 1334 (2013).10.1007/s00214-013-1334-z ↗
28. Sun, H. Force field for computation of conformational energies, structures, and vibrational frequencies of aromatic polyesters. J. Comput. Chem. 15, 752–768 (1994).10.1002/jcc.540150708 ↗
29. Thompson, A. P. et al. LAMMPS—a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales. Comput. Phys. Commun. 271, 108171 (2022).10.1016/j.cpc.2021.108171 ↗
30. Willems, T. F., Rycroft, C. H., Kazi, M., Meza, J. C. & Haranczyk, M. Algorithms and tools for high-throughput geometry-based analysis of crystalline porous materials. Microporous Mesoporous Mater. 149, 134–141 (2012).10.1016/j.micromeso.2011.08.020 ↗