A soft co-crystalline solid electrolyte for lithium-ion batteries
Source abstract
Abstract
Alternative solid electrolytes are the next key step in advancing lithium batteries with better thermal and chemical stability. A soft solid electrolyte, (Adpn)2LiPF6 (Adpn, adiponitrile), is synthesized and characterized that exhibits high thermal and electrochemical stability and good ionic conductivity, overcoming several limitations of conventional organic and ceramic materials. The surface of the electrolyte possesses a liquid nano-layer of Adpn that links grains for a facile ionic conduction without high pressure/temperature treatments. Further, the material can quickly self-heal if fractured and provides liquid-like conduction paths via the grain boundaries. A substantially high ion conductivity (~10-4 S cm-1) and lithium-ion transference number (0.54) are obtained due to weak interactions between 'hard' (charge dense) Li+ ions and the 'soft' (electronically polarizable) -C≡N group of Adpn. Molecular simulations predict that Li+ ions migrate at the co-crystal grain boundaries with a (preferentially) lower activation energy Ea and within the interstitial regions between the co-crystals with higher Ea values, where the bulk conductivity is a smaller but extant contribution. These co-crystals establish a special concept of crystal design to increase the thermal stability of LiPF6 by separating ions in the Adpn solvent matrix, and also exhibit a unique mechanism of ion conduction via low-resistance grain boundaries, which contrasts with ceramics or gel electrolytes.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Gao, Z. et al. Promises, challenges, and recent progress of inorganic solid-state electrolytes for all-solid-state lithium batteries. Adv. Mater. 30, 1705702 (2018).10.1002/adma.201705702 ↗
2. Lau, J. et al. Sulfide solid electrolytes for lithium battery applications. Adv. Energy Mater. 8, 1800933 (2018).10.1002/aenm.201800933 ↗
3. Gadjourova, Z., Marero, D. M., Andersen, K. H., Andreev, Y. G. & Bruce, P. G. Structures of the polymer electrolyte complexes PEO6:LiXF6 (X = P, Sb), determined from neutron powder diffraction data. Chem. Mater. 13, 1282–1285 (2001).10.1021/cm000949k ↗
4. MacGlashan, G. S., Andreev, Y. G. & Bruce, P. G. Structure of the polymer electrolyte poly(ethylene oxide)6:LiAsF6. Nature 398, 792–794 (1999).10.1038/19730 ↗
5. Gadjourova, Z., Andreev, Y. G., Tunstall, D. P. & Bruce, P. G. Ionic conductivity in crystalline polymer electrolytes. Nature 412, 520–523 (2001).10.1038/35087538 ↗
6. Zhang, C. H., Ainsworth, D., Andreev, Y. G. & Bruce, P. G. Ionic conductivity in the solid glyme complexes [CH3O(CH2CH2O)nCH3]:LiAsF6 (n = 3,4). J. Am. Chem. Soc. 129, 8700–8701 (2007).10.1021/ja073145f ↗
7. Stoeva, Z., Martin-Litas, I., Staunton, E., Andreev, Y. G. & Bruce, P. G. Ionic conductivity in the crystalline polymer electrolytes PEO6:LiXF6, X = P, As, Sb. J. Am. Chem. Soc. 125, 4619–4626 (2003).10.1021/ja029326t ↗
8. Staunton, E., Andreev, Y. G. & Bruce, P. G. Factors influencing the conductivity of crystalline polymer electrolytes. Faraday Discuss. 134, 143–156 (2007).10.1039/B601945E ↗
9. Pearson, R. G. Absolute electronegativity and hardness: application to inorganic chemistry. Inorg. Chem. 27, 734–740 (1988).10.1021/ic00277a030 ↗
10. Tanaka, K. et al. High Li-ion conductivity in Li{N(SO2F)2}(NCCH2CH2CN)2 molecular crystal. Nano Lett. 20, 8200–8204 (2020).10.1021/acs.nanolett.0c03313 ↗
11. Chinnam, P. R., Clymer, R. N., Jalil, A. A., Wunder, S. L. & Zdilla, M. J. Bulk-phase ion conduction in cocrystalline LiCl·N,N-dimethylformamide: a new paradigm for solid electrolytes based upon the Pearson hard–soft acid–base concept. Chem. Mater. 27, 5479–5482 (2015).10.1021/acs.chemmater.5b00940 ↗
12. Chinnam, P. R. et al. A self-binding, melt-castable, crystalline organic electrolyte for sodium ion conduction. Angew. Chem. Int. Ed. 55, 15254–15257 (2016).10.1002/anie.201606363 ↗
13. Prakash, P. et al. Solvate sponge crystals of (DMF)3NaClO4: reversible pressure/temperature controlled juicing in a melt/press-castable sodium-ion conductor. Chem. Sci. 12, 5574–5581 (2021).10.1039/D0SC06455F ↗
14. Prakash, P. et al. Mechanism of ion conduction and dynamics in tris(N,N-dimethylformamide) perchloratosodium solid electrolytes. J. Phys. Chem. C 126, 4744–4750 (2022).10.1021/acs.jpcc.1c09005 ↗
15. Fall, B. et al. Crystal structure and ionic conductivity of the soft solid crystal: isoquinoline3•(LiCl)2. Ionics 24, 343–349 (2018).10.1007/s11581-017-2206-7 ↗
16. Fall, B. et al. Experimental and theoretical investigation of the ion conduction mechanism of tris(adiponitrile)perchloratosodium, a self-binding, melt-castable crystalline sodium electrolyte. Chem. Mater. 31, 8850–8863 (2019).10.1021/acs.chemmater.9b02853 ↗
17. Abouimrane, A., Whitfield, P. S., Niketic, S. & Davidson, I. J. Investigation of Li salt doped succinonitrile as potential solid electrolytes for lithium batteries. J. Power Sources 174, 883–888 (2007).10.1016/j.jpowsour.2007.06.103 ↗
18. Alarco, P.-J., Abu-Lebdeh, Y., Abouimrane, A. & Armand, M. The plastic-crystalline phase of succinonitrile as a universal matrix for solid-state ionic conductors. Nat. Mater. 3, 476–481 (2004).10.1038/nmat1158 ↗
19. Yang, J. et al. Safety-enhanced polymer electrolytes for sodium batteries: recent progress and perspectives. ACS Appl. Mater. Interfaces 11, 17109–17127 (2019).10.1021/acsami.9b01239 ↗
20. Hu, P. et al. Progress in nitrile-based polymer electrolytes for high performance lithium batteries. J. Mater. Chem. A 4, 10070–10083 (2016).10.1039/C6TA02907H ↗
21. Forsyth, M., Sun, J. & Macfarlane, D. R. Novel polymer-in-salt electrolytes based on polyacrylonitrile (PAN)-lithium triflate salt mixtures. Solid State Ion. 112, 161–163 (1998).10.1016/S0167-2738(98)00166-0 ↗
22. Yoon, H.-K., Chung, W.-S. & Jo, N.-J. Study on ionic transport mechanism and interactions between salt and polymer chain in PAN based solid polymer electrolytes containing LiCF3SO3. Electrochim. Acta 50, 289–293 (2004).10.1016/j.electacta.2004.01.095 ↗
23. Xu, K. Electrolytes and interphases in Li-ion batteries and beyond. Chem. Rev. 114, 11503–11618 (2014).10.1021/cr500003w ↗
24. Li, W., Song, B. & Manthiram, A. High-voltage positive electrode materials for lithium-ion batteries. Chem. Soc. Rev. 46, 3006–3059 (2017).10.1039/C6CS00875E ↗
25. Wang, X. et al. Adiponitrile as lithium-ion battery electrolyte additive: a positive and peculiar effect on high-voltage systems. ACS Appl. Energy Mater. 1, 5347–5354 (2018).
26. Lee, S. H., Hwang, J., Park, S., Park, G. & Sun, Y. Adiponitrile (C6H8N2): a new bi‐functional additive for high‐performance Li‐metal batteries. Adv. Funct. Mater. 29, 1902496 (2019).10.1002/adfm.201902496 ↗
27. Di Censo, D., Exnar, I. & Graetzel, M. Non-corrosive electrolyte compositions containing perfluoroalkylsulfonyl imides for high power Li-ion batteries. Electrochem. Commun. 7, 1000–1006 (2005).10.1016/j.elecom.2005.07.005 ↗
28. Abu-Lebdeh, Y. & Davidson, I. High-voltage electrolytes based on adiponitrile for Li-ion batteries. J. Electrochem. Soc. 156, A60 (2009).10.1149/1.3023084 ↗
29. Yamada, Y. et al. Unusual stability of acetonitrile-based superconcentrated electrolytes for fast-charging lithium-ion batteries. J. Am. Chem. Soc. 136, 5039–5046 (2014).10.1021/ja412807w ↗
30. Kerner, M., Plylahan, N., Scheers, J. & Johansson, P. Thermal stability and decomposition of lithium bis(fluorosulfonyl)imide (LiFSI) salts. RSC Adv. 6, 23327–23334 (2016).10.1039/C5RA25048J ↗
31. Murata, K., Asakawa, H., Nagashima, K., Furukawa, Y. & Sazaki, G. Thermodynamic origin of surface melting on ice crystals. Proc. Natl Acad. Sci. USA 113, E6741–E6748 (2016).10.1073/pnas.1608888113 ↗
32. Prakash, P. et al. Unravelling the structural and dynamical complexity of the equilibrium liquid grain-binding layer in highly conductive organic crystalline electrolytes. J. Mater. Chem. A 6, 4394–4404 (2018).10.1039/C7TA10367K ↗
33. Wohde, F., Balabajew, M. & Roling, B. Li+ transference numbers in liquid electrolytes obtained by very-low-frequency impedance spectroscopy at variable electrode distances. J. Electrochem. Soc. 163, A714–A721 (2016).10.1149/2.0811605jes ↗
34. Ue, M., Takeda, M., Takehara, M. & Mori, S. Electrochemical properties of quaternary ammonium salts for electrochemical capacitors. J. Electrochem. Soc. 144, 2684–2688 (1997).10.1149/1.1837882 ↗
35. Cheng, X.-B. & Zhang, Q. Dendrite-free lithium metal anodes: stable solid electrolyte interphases for high-efficiency batteries. J. Mater. Chem. A 3, 7207–7209 (2015).10.1039/C5TA00689A ↗
36. Kerner, M. et al. Towards more thermally stable Li-ion battery electrolytes with salts and solvents sharing nitrile functionality. J. Power Sources 332, 204–212 (2016).10.1016/j.jpowsour.2016.09.101 ↗
37. Bruce, P. G. & Vincent, C. A. Steady state current flow in solid binary electrolyte cells. J. Electroanal. Chem. 225, 1–17 (1987).10.1016/0022-0728(87)80001-3 ↗
38. Evans, J., Vincent, C. A. & Bruce, P. G. Electrochemical measurement of transference numbers in polymer electrolytes. Polymer 28, 2324–2328 (1987).10.1016/0032-3861(87)90394-6 ↗
39. Jorgensen, W. L., Maxwell, D. S. & Tirado-Rives, J. Development and testing of the OPLS all-atom force field on conformational energetics and properties of organic liquids. J. Am. Chem. Soc. 118, 11225–11236 (1996).10.1021/ja9621760 ↗
40. Breneman, C. M. & Wiberg, K. B. Determining atom centered monopoles from molecular electrostatic potentials. The need for high sampling density in formamide conformational analysis. J. Comput. Chem. 11, 361–373 (1990).10.1002/jcc.540110311 ↗
41. Frisch, M. J. et al. Gaussian 09, Revision E.01 (Gaussian, 2009).
42. Abraham, M. J. et al. GROMACS: high performance molecular simulations through multi-level parallelism from laptops to supercomputers. SoftwareX 1–2, 19–25 (2015).10.1016/j.softx.2015.06.001 ↗
43. Humphrey, W., Dalke, A. & Schulten, K. VMD: Visual Molecular Dynamics. J. Mol. Graph. 14, 33–38 (1996).10.1016/0263-7855(96)00018-5 ↗
44. Giannozzi, P. et al. Advanced capabilities for materials modelling with Quantum ESPRESSO. J. Phys. Condens. Matter 29, 465901 (2017).10.1088/1361-648X/aa8f79 ↗
45. Kresse, G. & Joubert, D. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. Rev. B 59, 1758–1775 (1999).10.1103/PhysRevB.59.1758 ↗
46. Perdew, J. P., Ernzerhof, M. & Burke, K. Rationale for mixing exact exchange with density functional approximations. J. Chem. Phys. 105, 9982–9985 (1996).10.1063/1.472933 ↗
47. Henkelman, G., Uberuaga, B. P. & Jónsson, H. A climbing image nudged elastic band method for finding saddle points and minimum energy paths. J. Chem. Phys. 113, 9901–9904 (2000).10.1063/1.1329672 ↗