journal article·2019-05

Molten salt shielded synthesis of oxidation prone materials in air

Apurv Dash, Robert Vaßen, Olivier Guillon, Jesus Gonzalez-Julian

Nature Materials· Volume 18· Issue 5
Publisher page

Abstract

To prevent spontaneous oxidation during the high-temperature synthesis of non-oxide ceramics, an inert atmosphere is conventionally required1,2. This, however, results in high energy demand and high production costs. Here, we present a process for the synthesis and consolidation of oxidation-prone materials, the 'molten salt shielded synthesis/sintering' process (MS3), which uses molten salts as a reaction medium and also to protect the ceramic powders from oxidation during high-temperature processing in air. Synthesis temperatures are also reduced, and the final product is a highly pure, fine and loose powder that does not require additional milling steps. MS3 has been used for the synthesis of different ternary transition metal compounds (MAX phases, such as Ti3SiC23, Ti2AlN4, MoAlB5), binary carbides (TiC) and for the sintering of titanium. The availability of high-quality powders, combined with energy and cost savings, may remove one of the bottlenecks for the industrial application of these materials.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: MXene and MAX Phase Materials · Advanced ceramic materials synthesis · Inorganic Chemistry and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. German, R. Sintering: From Empirical Observations to Scientific Principles (Elsevier, 2014).
2. Rahaman, M. Sintering of Ceramics (CRC, 2007).10.1201/b15869 ↗
3. Barsoum, M. W. & El-Raghy, T. Synthesis and characterization of a remarkable ceramic: Ti3SiC2. J. Am. Ceram. Soc. 79, 1953–1956 (1996).10.1111/j.1151-2916.1996.tb08018.x ↗
4. Barsoum, M. W., El-Raghy, T. & Ali, M. Processing and characterization of Ti2AlC, Ti2AlN, and Ti2AlC0.5N0.5. Metall. Mater. Trans. A 31, 1857–1865 (2000).10.1007/s11661-006-0243-3 ↗
5. Kota, S. et al. Synthesis and characterization of an alumina forming nanolaminated boride: MoAlB. Sci. Rep. 6, 26475 (2016).10.1038/srep26475 ↗
6. Barsoum, M. W. MAX Phases: Properties of Machinable Ternary Carbides and Nitrides (Wiley, 2013).10.1002/9783527654581 ↗
7. Boyer, R. R. An overview on the use of titanium in the aerospace industry. Mater. Sci. Eng. A 213, 103–114 (1996).10.1016/0921-5093(96)10233-1 ↗
8. Singh, R., Lee, P. D., Dashwood, R. J. & Lindley, T. C. Titanium foams for biomedical applications: a review. Mater. Technol. 25, 127–136 (2010).10.1179/175355510X12744412709403 ↗
9. Qian, M., Schaffer, G. B. & Bettles, C. J. in Sintering of Advanced Materials 324–355 (Elsevier, 2010).10.1533/9781845699949.3.324 ↗
10. Froes, F. H., Eylon, D., Eichelman, G. E. & Burte, H. M. Developments in titanium powder metallurgy. JOM 32, 47–54 (1980).10.1007/BF03354547 ↗
11. Dunand, D. C. Processing of titanium foams. Adv. Eng. Mater. 6, 369–376 (2004).10.1002/adem.200405576 ↗
12. Ryan, G. E., Pandit, A. S. & Apatsidis, D. P. Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique. Biomaterials 29, 3625–3635 (2008).10.1016/j.biomaterials.2008.05.032 ↗
13. Xue, W., Krishna, B. V., Bandyopadhyay, A. & Bose, S. Processing and biocompatibility evaluation of laser processed porous titanium. Acta Biomater. 3, 1007–1018 (2007).10.1016/j.actbio.2007.05.009 ↗
14. Davis, N. G., Teisen, J., Schuh, C. & Dunand, D. C. Solid-state foaming of titanium by superplastic expansion of argon-filled pores. J. Mater. Res. 16, 1508–1519 (2001).10.1557/JMR.2001.0210 ↗
15. Torres, Y., Pavón, J. J. & Rodríguez, J. A. Processing and characterization of porous titanium for implants by using NaCl as space holder. J. Mater. Process. Technol. 212, 1061–1069 (2012).10.1016/j.jmatprotec.2011.12.015 ↗
16. Oh, I.-H., Nomura, N., Masahashi, N. & Hanada, S. Mechanical properties of porous titanium compacts prepared by powder sintering. Scr. Mater. 49, 1197–1202 (2003).10.1016/j.scriptamat.2003.08.018 ↗
17. Kimura, T. Advances in Ceramics—Synthesis and Characterization, Processing and Specific Applications (InTech, 2011).
18. Gogotsi, Y. Materials Science of Carbides, Nitrides and Borides (Springer, 1999).10.1007/978-94-011-4562-6 ↗
19. Parker, E. R., Pask, J. A., Washburn, J., Gorum, A. E. & Luhman, W. Ductile ceramics—a high temperature possibility. JOM 10, 351–353 (1958).10.1007/BF03398218 ↗
20. Gorum, A. E., Parker, E. R. & Pask, J. A. Effect of surface conditions on room temperature ductility of ionic crystals. J. Am. Ceram. Soc. 41, 161–164 (1958).10.1111/j.1151-2916.1958.tb13533.x ↗
21. Yoon, K. H., Cho, Y. S. & Kang, D. H. Molten salt synthesis of lead-based relaxors. J. Mater. Sci. 33, 2977–2984 (1998).10.1023/A:1004310931643 ↗
22. Wang, Q. et al. The equilibrium between titanium ions and titanium metal in NaCl-KCl equimolar molten salt. Metall. Mater. Trans. B 44, 906–913 (2013).10.1007/s11663-013-9853-5 ↗
23. Selloni, A., Carnevali, P., Car, R. & Parrinello, M. Localization, hopping, and diffusion of electrons in molten salts. Phys. Rev. Lett. 59, 823–826 (1987).10.1103/PhysRevLett.59.823 ↗
24. Liu, X., Fechler, N. & Antonietti, M. Salt melt synthesis of ceramics, semiconductors and carbon nanostructures. Chem. Soc. Rev. 42, 8237–8265 (2013).10.1039/C3CS60159E ↗
25. Hu, C., Sakka, Y., Tanaka, H., Nishimura, T. & Grasso, S. Fabrication of textured Nb4AlC3 ceramic by slip casting in a strong magnetic field and spark plasma sintering. J. Am. Ceram. Soc. 94, 410–415 (2011).10.1111/j.1551-2916.2010.04096.x ↗
26. Murugaiah, A. et al. Tape casting, pressureless sintering, and grain growth in Ti3 SiC2 compacts. J. Am. Ceram. Soc. 87, 550–556 (2004).10.1111/j.1551-2916.2004.00550.x ↗
27. Gonzalez-Julian, J., Classen, L., Bram, M., Vaßen, R. & Guillon, O. Near net shaping of monolithic and composite MAX phases by injection molding. J. Am. Ceram. Soc. 99, 3210–3213 (2016).10.1111/jace.14466 ↗
28. Nan, B., Yin, X., Zhang, L. & Cheng, L. Three-dimensional printing of Ti3SiC2-based ceramics. J. Am. Ceram. Soc. 94, 969–972 (2011).10.1111/j.1551-2916.2010.04257.x ↗
29. Tian, W. B., Wang, P. L., Kan, Y. M. & Zhang, G. J. Cr2AlC powders prepared by molten salt method. J. Alloys Compd 461, L5–L10 (2008).10.1016/j.jallcom.2007.06.094 ↗
30. Guo, X., Wang, J., Yang, S., Gao, L. & Qian, B. Preparation of Ti3SiC2 powders by the molten salt method. Mater. Lett. 111, 211–213 (2013).10.1016/j.matlet.2013.08.077 ↗
31. Tzenov, N. V. & Barsoum, M. W. Synthesis and characterization of Ti3AlC2. J. Am. Ceram. Soc. 83, 825–832 (2004).10.1111/j.1151-2916.2000.tb01281.x ↗
32. Gao, N. F., Li, J. T., Zhang, D. & Miyamoto, Y. Rapid synthesis of dense Ti3SiC2 by spark plasma sintering. J. Eur. Ceram. Soc. 22, 2365–2370 (2002).10.1016/S0955-2219(02)00021-3 ↗
33. Zhang, Z. F., Sun, Z. M. & Hashimoto, H. Rapid synthesis of ternary carbide Ti3SiC2 through pulse-discharge sintering technique from Ti/Si/TiC powders. Metall. Mater. Trans. A 33, 3321–3328 (2002).10.1007/s11661-002-0320-1 ↗
34. Zhou, Y. & Sun, Z. Temperature fluctuation/hot pressing synthesis of Ti3SiC2. J. Mater. Sci. 35, 4343–4346 (2000).10.1023/A:1004848705481 ↗
35. Pinho, S. & Macedo, E. Experimental measurement and modelling of KBr solubility in water, methanol, ethanol, and its binary mixed solvents at different temperatures. J. Chem. Thermodyn. 34, 337–360 (2002).10.1006/jcht.2001.0856 ↗