journal article·2021-11

Local electronic structure variation resulting in Li ‘filament’ formation within solid electrolytes

Xiaoming Liu, Regina Garcia-Mendez, Andrew R. Lupini, Yongqiang Cheng, Zachary D. Hood, Fudong Han, Asma Sharafi, Juan Carlos Idrobo, Nancy J. Dudney, Chunsheng Wang, Cheng Ma, Jeff Sakamoto, Miaofang Chi

Nature Materials· Volume 20· Issue 11
Publisher page

Abstract

Solid electrolytes hold great promise for enabling the use of Li metal anodes. The main problem is that during cycling, Li can infiltrate along grain boundaries and cause short circuits, resulting in potentially catastrophic battery failure. At present, this phenomenon is not well understood. Here, through electron microscopy measurements on a representative system, Li7La3Zr2O12, we discover that Li infiltration in solid oxide electrolytes is strongly associated with local electronic band structure. About half of the Li7La3Zr2O12 grain boundaries were found to have a reduced bandgap, around 1-3 eV, making them potential channels for leakage current. Instead of combining with electrons at the cathode, Li+ ions are hence prematurely reduced by electrons at grain boundaries, forming local Li filaments. The eventual interconnection of these filaments results in a short circuit. Our discovery reveals that the grain-boundary electronic conductivity must be a primary concern for optimization in future solid-state battery design.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Lin, D., Liu, Y. & Cui, Y. Reviving the lithium metal anode for high-energy batteries. Nat. Nanotechnol. 12, 194–206 (2017).10.1038/nnano.2017.16 ↗
2. Xu, W. et al. Lithium metal anodes for rechargeable batteries. Energy Environ. Sci. 7, 513–537 (2014).10.1039/C3EE40795K ↗
3. Albertus, P., Babinec, S., Litzelman, S. & Newman, A. Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries. Nat. Energy 3, 16–21 (2018).10.1038/s41560-017-0047-2 ↗
4. Han, F. et al. High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes. Nat. Energy 4, 187–196 (2019).10.1038/s41560-018-0312-z ↗
5. Porz, L. et al. Mechanism of lithium metal penetration through inorganic solid electrolytes. Adv. Energy Mater. 7, 1701003 (2017).10.1002/aenm.201701003 ↗
6. Ren, Y., Shen, Y., Lin, Y. & Nan, C. W. Direct observation of lithium dendrites inside garnet-type lithium-ion solid electrolyte. Electrochem. Commun. 57, 27–30 (2015).10.1016/j.elecom.2015.05.001 ↗
7. Aguesse, F. et al. Investigating the dendritic growth during full cell cycling of garnet electrolyte in direct contact with Li metal. ACS Appl. Mater. Interfaces 9, 3808–3816 (2017).10.1021/acsami.6b13925 ↗
8. Cheng, E. J., Sharafi, A. & Sakamoto, J. Intergranular Li metal propagation through polycrystalline Li6.25Al0.25La3Zr2O12 ceramic electrolyte. Electrochim. Acta 223, 85–91 (2017).10.1016/j.electacta.2016.12.018 ↗
9. Sharafi, A., Meyer, H. M., Nanda, J., Wolfenstine, J. & Sakamoto, J. Characterizing the Li–Li7La3Zr2O12 interface stability and kinetics as a function of temperature and current density. J. Power Sources 302, 135–139 (2016).10.1016/j.jpowsour.2015.10.053 ↗
10. Ma, C. et al. Interfacial stability of Li metal–solid electrolyte elucidated via in situ electron microscopy. Nano Lett. 16, 7030–7036 (2016).10.1021/acs.nanolett.6b03223 ↗
11. Cheng, L. et al. The origin of high electrolyte–electrode interfacial resistances in lithium cells containing garnet type solid electrolytes. Phys. Chem. Chem. Phys. 16, 18294–18300 (2014).10.1039/C4CP02921F ↗
12. Zhu, Y., He, X. & Mo, Y. First principles study on electrochemical and chemical stability of solid electrolyte–electrode interfaces in all-solid-state Li-ion batteries. J. Mater. Chem. A 4, 3253–3266 (2016).10.1039/C5TA08574H ↗
13. Hofstetter, K., Samson, A. J., Narayanan, S. & Thangadurai, V. Present understanding of the stability of Li-stuffed garnets with moisture, carbon dioxide, and metallic lithium. J. Power Sources 390, 297–312 (2018).10.1016/j.jpowsour.2018.04.016 ↗
14. Li, Y. et al. Garnet electrolyte with an ultralow interfacial resistance for Li-metal batteries. J. Am. Chem. Soc. 140, 6448–6455 (2018).10.1021/jacs.8b03106 ↗
15. Yu, S. et al. Elastic properties of the solid electrolyte Li7La3Zr2O12 (LLZO). Chem. Mater. 28, 197–206 (2016).10.1021/acs.chemmater.5b03854 ↗
16. Ni, J. E., Case, E. D., Sakamoto, J. S., Rangasamy, E. & Wolfenstine, J. B. Room temperature elastic moduli and Vickers hardness of hot-pressed LLZO cubic garnet. J. Mater. Sci. 47, 7978–7985 (2012).10.1007/s10853-012-6687-5 ↗
17. Shen, F., Dixit, M. B., Xiao, X. & Hatzell, K. B. Effect of pore connectivity on Li dendrite propagation within LLZO electrolytes observed with synchrotron X-ray tomography. ACS Energy Lett. 3, 1056–1061 (2018).10.1021/acsenergylett.8b00249 ↗
18. Suzuki, Y. et al. Transparent cubic garnet-type solid electrolyte of Al2O3-doped Li7La3Zr2O12. Solid State Ion. 278, 172–176 (2015).10.1016/j.ssi.2015.06.009 ↗
19. Sudo, R. et al. Interface behavior between garnet-type lithium-conducting solid electrolyte and lithium metal. Solid State Ion. 262, 151–154 (2014).10.1016/j.ssi.2013.09.024 ↗
20. Duan, H., Zheng, H., Zhou, Y., Xu, B. & Liu, H. Stability of garnet-type Li ion conductors: an overview. Solid State Ion. 318, 45–53 (2018).10.1016/j.ssi.2017.09.018 ↗
21. Yang, C. et al. Continuous plating/stripping behavior of solid-state lithium metal anode in a 3D ion-conductive framework. Proc. Natl Acad. Sci. USA 115, 3770–3775 (2018).10.1073/pnas.1719758115 ↗
22. Wu, B. et al. The role of the solid electrolyte interphase layer in preventing Li dendrite growth in solid-state batteries. Energy Environ. Sci. 11, 1803–1810 (2018).10.1039/C8EE00540K ↗
23. Fu, K. K. et al. Toward garnet electrolyte–based Li metal batteries: an ultrathin, highly effective, artificial solid-state electrolyte/metallic Li interface. Sci. Adv. 3, e1601659 (2017).10.1126/sciadv.1601659 ↗
24. Sharafi, A. et al. Surface chemistry mechanism of ultra-low interfacial resistance in the solid-state electrolyte Li7La3Zr2O12. Chem. Mater. 29, 7961–7968 (2017).10.1021/acs.chemmater.7b03002 ↗
25. Tsai, C. L. et al. Li7La3Zr2O12 interface modification for Li dendrite prevention. ACS Appl. Mater. Interfaces 8, 10617–10626 (2016).10.1021/acsami.6b00831 ↗
26. Wu, B. et al. The role of the solid electrolyte interphase layer in preventing Li dendrite growth in solid-state batteries. Energy Environ. Sci. 11, 1803–1810 (2018).10.1039/C8EE00540K ↗
27. Tian, H. K., Liu, Z., Ji, Y., Chen, L. Q. & Qi, Y. Interfacial electronic properties dictate Li dendrite growth in solid electrolytes. Chem. Mater. 31, 7351–7359 (2019).10.1021/acs.chemmater.9b01967 ↗
28. Yu, S. & Siegel, D. J. Grain boundary contributions to Li-ion transport in the solid electrolyte Li7La3Zr2O12 (LLZO). Chem. Mater. 29, 9639–9647 (2017).10.1021/acs.chemmater.7b02805 ↗
29. Hachtel, J. A., Lupini, A. R. & Idrobo, J. C. Exploring the capabilities of monochromated electron energy loss spectroscopy in the infrared regime. Sci. Rep. 8, 5637 (2018).10.1038/s41598-018-23805-5 ↗
30. Zhan, W. et al. Nanoscale mapping of optical band gaps using monochromated electron energy loss spectroscopy. Nanotechnology 28, 105703 (2017).10.1088/1361-6528/aa5962 ↗
31. Tizei, L. H. G. et al. Exciton mapping at subwavelength scales in two-dimensional materials. Phys. Rev. Lett. 114, 107601 (2015).10.1103/PhysRevLett.114.107601 ↗
32. Thompson, T. et al. Electrochemical window of the Li-ion solid electrolyte Li7La3Zr2O12. ACS Energy Lett. 2, 462–468 (2017).10.1021/acsenergylett.6b00593 ↗
33. Bean, J. J. et al. Atomic structure and electronic properties of MgO grain boundaries in tunnelling magnetoresistive devices. Sci. Rep. 7, 45594 (2017).10.1038/srep45594 ↗
34. Chisholm, M. F. et al. Electronic structure of a grain-boundary model in SrTiO3. Phys. Rev. B 60, 2416–2424 (1999).10.1103/PhysRevB.60.2416 ↗
35. Guhl, H. et al. Structural and electronic properties of Σ7 grain boundaries in α-Al2O3. Acta Mater. 99, 16–28 (2015).10.1016/j.actamat.2015.07.042 ↗
36. Rangasamy, E., Wolfenstine, J. & Sakamoto, J. The role of Al and Li concentration on the formation of cubic garnet solid electrolyte of nominal composition Li7La3Zr2O12. Solid State Ion. 206, 28–32 (2012).10.1016/j.ssi.2011.10.022 ↗
37. Knauth, P. Inorganic solid Li ion conductors: an overview. Solid State Ion. 180, 911–916 (2009).10.1016/j.ssi.2009.03.022 ↗
38. Ma, C. et al. Atomic-scale origin of the large grain-boundary resistance in perovskite Li-ion-conducting solid electrolytes. Energy Environ. Sci. 7, 1638–1642 (2014).10.1039/c4ee00382a ↗
39. Lazar, S., Botton, G. A., Wu, M.-Y., Tichelaar, F. D. & Zandbergen, H. W. Materials science applications of HREELS in near edge structure analysis and low-energy loss spectroscopy. Ultramicroscopy 96, 535–546 (2003).10.1016/S0304-3991(03)00114-1 ↗
40. Park, J. & Yang, M. Determination of complex dielectric functions at HfO2/Si interface by using STEM-VEELS. Micron 40, 365–369 (2009).10.1016/j.micron.2008.10.006 ↗