Novel Ti-base nanostructure–dendrite composite with enhanced plasticity
Source abstract
Abstract
Single-phase nanocrystalline materials undergo inhomogeneous plastic deformation under loading at room temperature, which results in a very limited plastic strain (smaller than 0-3%). The materials therefore display low ductility, leading to catastrophic failure, which severely restricts their application. Here, we present a new in situ-formed nanostructured matrix/ductile dendritic phase composite microstructure for Ti-base alloys, which exhibits up to 14.5% compressive plastic strain at room temperature. The new composite microstructure was synthesized on the basis of the appropriate choice of composition, and by using well-controlled solidification conditions. Deformation occurs partially through dislocation movement in dendrites, and partially through a shear-banding mechanism in the nanostructured matrix. The dendrites act as obstacles restricting the excessive deformation by isolating the highly localized shear bands in small, discrete interdendritic regions, and contribute to the plasticity. We suggest that microscale ductile crystalline phases might therefore be used to toughen nanostructured materials.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Quasicrystal Structures and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Ovid'ko, I.A. Deformation of nanostructures. Science 295, 2386–2386 (2002).10.1126/science.1071064 ↗
2. Koch, C.C., Morris, D.G., Lu, K. & Inoue, A. Ductility of nanostructured materials. Mater. Res. Bull. 24, 54–58 (1999).10.1557/S0883769400051551 ↗
3. Greer, A.L. Metallic glasses. Science 267, 1947–1953 (1995).10.1126/science.267.5206.1947 ↗
4. Johnson, W.L. Bulk glass-forming metallic alloys: science and technology. Mater. Res. Bull. 24, 42–56 (1999).10.1557/S0883769400053252 ↗
5. Inoue, A. High strength bulk amorphous alloys with low critical cooling rates (overview). Mater. Trans. JIM 36, 866–875 (1995).10.2320/matertrans1989.36.866 ↗
6. Nieh, T.G., Wadsworth, J., Liu, C.T., Ohkubo, Y. & Hirotsu, Y. Plasticity and structural instability in a bulk metallic glass deformed in the supercooled liquid region. Acta Mater. 49, 2887–2896 (2001).10.1016/S1359-6454(01)00218-X ↗
7. Liu, C.T. et al. Test environments and mechanical properites of Zr-base bulk amorphous alloys. Metall. Mater. Trans. A 29, 1811–1820 (1998).10.1007/s11661-998-0004-6 ↗
8. Bruck, H.A., Christman, T., Rosakis, A.J. & Johnson, W.L. Quasi-static constitutive behaviour of Zr41.25Ti13.75Ni10Cu12.5Be22.5 bulk amorphous alloys. Scripta Metall. Mater. 30, 429–434 (1994).10.1016/0956-716X(94)90598-3 ↗
9. Fan, C. & Inoue, A. Improvement of mechanical properties by precipitation of nanoscale compound particles in Zr-Cu-Pd-Al amorphous alloys. Mater. Trans. JIM 38, 1040–1046 (1997).10.2320/matertrans1989.38.1040 ↗
10. Kühn, U., Eckert, J., Mattern, N. & Schultz, L. ZrNbCuNiAl bulk metallic glass matrix composites containing dendritic bcc phase precipitates. Appl. Phys. Lett. 80, 2478–2480 (2002).10.1063/1.1467707 ↗
11. Hays, C.C., Kim, C.P. & Johnson, W.L. Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions. Phys. Rev. Lett. 84, 2901–2904 (2000).10.1103/PhysRevLett.84.2901 ↗
12. Williams, D.B. & Carter, C.B. Transmission Electron Microscopy: A Textbook for Materials Science 444–450 (Plenum, New York, 1996).10.1007/978-1-4757-2519-3 ↗
13. Inoue, A. Stabilization of metallic supercooled liquid and bulk amorphous alloys. Acta Mater. 48, 279–306 (2000).10.1016/S1359-6454(99)00300-6 ↗
14. Inoue, A. Preparation and novel properties of nanocrystalline and nanoquasicrystalline alloys. Nanostruct. Mater. 6, 53–64 (1995).10.1016/0965-9773(95)00029-1 ↗
15. Wei, Q., Jia, D., Ramesh, K.T. & Ma, E. Evolution and microstructure of shear bands in nanostructured Fe. Appl. Phys. Lett. 81, 1240–1242 (2002).10.1063/1.1501158 ↗
16. Jia, D., Ramesh, K.T. & Ma, E. Failure mode and dynamic behaviour of nanophase iron under compression. Scripta Mater. 42, 73–78 (2000).10.1016/S1359-6462(99)00312-7 ↗
17. Jia, D., Ramesh, K.T., Ma, E., Lu, L. & Lu, K. Compressive behaviour of an electrodeposited nanostructured copper at quasistatic and high strain rates. Scripta Mater. 45, 613–620 (2001).10.1016/S1359-6462(01)01071-5 ↗
18. Carsley, J.E., Fisher, A., Milligan, W.W. & Aifantis, E.C. Mechanical behaviour of a bulk nanostructured iron alloy. Metall. Mater. Trans. A 29, 2261–2271 (1998).10.1007/s11661-998-0104-3 ↗
19. McFadden, S.X., Mishra, R.S., Valiev, R.Z., Zhilyaev, A.P. & Mukherjee, A.K. Low-temperature superplasticity in nanostructured nickel and metal alloys. Nature 398, 684–686 (1999).10.1038/19486 ↗
20. Chen, H., He, Y., Shiflet, G.J. & Poon, S.J. Deformation-induced nanocrystal formation in shear bands of amorphous alloys. Nature 367, 541–543 (1994).10.1038/367541a0 ↗
21. Weertman, J.R. et al. Structure and mechanical behaviour of bulk nanocrystalline materials. Mater. Res. Bull. 24, 44–50 (1999).10.1557/S088376940005154X ↗
22. Fan, C. & Inoue, A. Preparation and mechanical properties of Zr-based bulk nanocrystalline alloys containing compound and amorphous phases. Mater. Trans. JIM 40, 42–51 (1999).10.2320/matertrans1989.40.42 ↗
23. Zhang, T. & Inoue, A. Thermal and mechanical properties of Ti-Ni-Cu-Sn amorphous alloys with a wide supercooled liquid region before crystallization. Mater. Trans. JIM 39, 1001–1006 (1998).10.2320/matertrans1989.39.1001 ↗
24. Lin, X.H. & Johnson, W.L. Formation of Ti-Zr-Cu-Ni bulk metallic glasses. J. Appl. Phys. 78, 6514–6519 (1995).10.1063/1.360537 ↗
25. Bakker, H. Enthalpies in Alloys 70 (Trans Tech, Switzerland, 1998).10.4028/www.scientific.net/MSFo.1 ↗
26. Froes, F.H., Yau, T.L. & Weidinger, H.G. in Materials Science and Technology Vol. 8 (eds Cahn, R.W., Haasen, P. & Kramer, E.J.) 403–435 (VCH, Weinheim, Germany, 1996).
27. Massalaki, T.B., Okamoto, H., Subramanian, P.R. & Kacprzak, L. (eds) Binary Alloy Phase Diagrams 2nd edn 1416–3441 (ASM International, Ohio, USA, 1992).