Three-dimensional reconstruction of a solid-oxide fuel-cell anode
Source abstract
Abstract
The drive towards increased energy efficiency and reduced air pollution has led to accelerated worldwide development of fuel cells. As the performance and cost of fuel cells have improved, the materials comprising them have become increasingly sophisticated, both in composition and microstructure. In particular, state-of-the-art fuel-cell electrodes typically have a complex micro/nano-structure involving interconnected electronically and ionically conducting phases, gas-phase porosity, and catalytically active surfaces. Determining this microstructure is a critical, yet usually missing, link between materials properties/processing and electrode performance. Current methods of microstructural analysis, such as scanning electron microscopy, only provide two-dimensional anecdotes of the microstructure, and thus limited information about how regions are interconnected in three-dimensional space. Here we demonstrate the use of dual-beam focused ion beam-scanning electron microscopy to make a complete three-dimensional reconstruction of a solid-oxide fuel-cell electrode. We use this data to calculate critical microstructural features such as volume fractions and surface areas of specific phases, three-phase boundary length, and the connectivity and tortuosity of specific subphases.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Brandon, N. P., Skinner, S. & Steele, B. C. H. Recent advances in materials for fuel cells. Annu. Rev. Mater. Res. 33, 183–213 (2003).10.1146/annurev.matsci.33.022802.094122 ↗
2. Adler, S. B. Factors governing oxygen reduction in solid oxide fuel cell cathodes. Chem. Rev. 104, 4791–4843 (2004).10.1021/cr020724o ↗
3. Jiang, S. P. & Chan, S. H. A review of anode materials development in solid oxide fuel cells. J. Mater. Sci. 39, 4405–4439 (2004).10.1023/B:JMSC.0000034135.52164.6b ↗
4. Kenjo, T. & Nishiya, M. LaMnO3 air cathodes containing ZrO2 electrolyte for high temperature solid oxide fuel cells. Solid State Ion. 57, 295–302 (1992).10.1016/0167-2738(92)90161-H ↗
5. Svensson, A. M., Sunde, S. & Nisancioglu, K. A mathematical model of the porous SOFC electrode. Solid State Ion. 86, 1211–1216 (1996).10.1016/0167-2738(96)00289-5 ↗
6. Virkar, A. V., Chen, J., Tanner, C. W. & Kim, J. W. The role of electrode microstructure on activation and concentration polarizations in solid oxide fuel cells. Solid State Ion. 131, 189–198 (2000).10.1016/S0167-2738(00)00633-0 ↗
7. Sunde, S. Simulations of composite electrodes in fuel cells. J. Electroceram. 5, 153–182 (2000).10.1023/A:1009962319168 ↗
8. Murray, E. P., Tsai, T. & Barnett, S. A. Oxygen transfer processes in (La,Sr)MnO3/Y2O3-stabilized ZrO2 cathodes: an impedance spectroscopy study. Solid State Ion. 110, 235–243 (1998).10.1016/S0167-2738(98)00142-8 ↗
9. Tiedemann, W. H. & Newman, J. S. Porous electrode theory with battery applications. AIChE J. 21, 25–41 (1975).10.1002/aic.690210103 ↗
10. Zhao, F., Jiang, Y., Lin, G. Y. & Virkar, A. V. in Solid Oxide Fuel Cell VII (ed. Singhal, S. C.) 501–510 (The Electrochemical Society, Pennington NJ, 2001).
11. Deng, X. & Petric, A. Geometrical modeling of the triple-phase boundary in solid oxide fuel cells. J. Power Sources 140, 297–303 (2005).10.1016/j.jpowsour.2004.08.046 ↗
12. Wang, C. T. & Smith, J. M. Tortuosity factors for diffusion in catalyst pellets. AIChE J. 29, 132–136 (1983).10.1002/aic.690290118 ↗
13. Fleig, J. & Maier, J. The influence of laterally inhomogeneous contacts on the impedance of solid materials: a three-dimensional finite-element study. J. Electroceram. 1, 73–89 (1997).10.1023/A:1009902532596 ↗
14. Tanner, C. W., Fung, K. Z. & Virkar, A. V. The effect of porous composite electrode structure on solid oxide fuel cell performance. J. Electrochem. Soc. 144, 21–30 (1997).10.1149/1.1837360 ↗
15. Stevenson, J. W. et al. in Proc. 8th Int. Symp. on Solid Oxide Fuel Cells (eds Singhal, S. C. & Dokiya, M.) 31–42 (The Electrochemical Society, Pennington NJ, 2003).
16. Kim, J. W., Virkar, A. V., Fung, K. Z., Mehta, K. & Singhal, S. C. Polarization effects in intermediate temperature, anode-supported solid oxide fuel cells. J. Electrochem. Soc. 146, 69–78 (1999).10.1149/1.1391566 ↗
17. Brown, M., Primdahl, S. & Mogensen, M. Structure/performance relations for Ni/Yttria-stabilized zirconia anodes for solid oxide fuel cells. J. Electrochem. Soc. 147, 475–485 (2000).10.1149/1.1393220 ↗
18. Hansen, K. V., Norrman, K. & Mogensen, M. H2–H2O–Ni–YSZ electrode performance: Effect of segregation to the interface. J. Electrochem. Soc. 151, A1436–A1444 (2004).10.1149/1.1779630 ↗
19. Lin, Y., Zhan, Z., Liu, J. & Barnett, S. A. Direct operation of solid oxide fuel cells with methane fuel. Solid State Ion. 176, 1827–1835 (2005).10.1016/j.ssi.2005.05.008 ↗
20. Liu, J. & Barnett, S. A. Thin YSZ electrolyte solid oxide fuel cells by centrifugal casting. J. Am. Ceram. Soc. 85, 3096–3098 (2002).10.1111/j.1151-2916.2002.tb00588.x ↗
21. Sakamoto, S., Taira, H. & Takagi, H. Effective electrode reaction area of cofired type planar SOFC. Denki Kagaku 64, 609–613 (1996).10.5796/kogyobutsurikagaku.64.609 ↗
22. Norby, T. in Proc. 2nd European Solid Oxide Fuel Cell Forum (Oslo, Norway) (ed. Thorstenen, B.) 607–616 (Dr Ulf Bossel, Oberrohrdorf, Switzerland, 1996).
23. Bieberle, A., Meier, L. P. & Gauckler, L. J. The electrochemistry of Ni pattern anodes used as solid oxide fuel cell model electrodes. J. Electrochem. Soc. 148, A646–A656 (2001).10.1149/1.1372219 ↗
24. Mizusaki, J. et al. Preparation of nickel pattern electrodes on YSZ and their electrochemical properties in H2–H2O atmospheres. J. Electrochem. Soc. 141, 2129–2134 (1994).10.1149/1.2055073 ↗
25. Zhao, F. & Virkar, A. V. Dependence of polarization in anode-supported solid oxide fuel cells on various cell parameters. J. Power Sources 141, 79–95 (2005).10.1016/j.jpowsour.2004.08.057 ↗
26. Zalc, J. M., Reyes, S. C. & Iglesia, E. The effects of diffusion mechanism and void structure on transport rates and tortuosity factors in complex porous structures. Chem. Eng. Sci. 59, 2947–2960 (2004).10.1016/j.ces.2004.04.028 ↗