Gradient bandgaps in sulfide kesterite solar cells enable over 13% certified efficiency
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Wang, W. et al. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency. Adv. Energy Mater. 4, 1301465 (2014).10.1002/aenm.201301465 ↗
2. Antunez, P. D., Bishop, D. M., Luo, Y. & Haight, R. Efficient kesterite solar cells with high open-circuit voltage for applications in powering distributed devices. Nat. Energy 2, 884–890 (2017).10.1038/s41560-017-0028-5 ↗
3. Yan, C. et al. Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment. Nat. Energy 3, 764–772 (2018).10.1038/s41560-018-0206-0 ↗
4. Zhou, J. et al. Control of the phase evolution of kesterite by tuning of the selenium partial pressure for solar cells with 13.8% certified efficiency. Nat. Energy 8, 526–535 (2023).10.1038/s41560-023-01251-6 ↗
5. Gong, Y. et al. Elemental de-mixing-induced epitaxial kesterite/CdS interface enabling 13%-efficiency kesterite solar cells. Nat. Energy 7, 966–977 (2022).10.1038/s41560-022-01132-4 ↗
6. Best research-cell efficiency chart. NREL https://www.nrel.gov/pv/cell-efficiency.html
7. Su, Z. et al. Device postannealing enabling over 12% efficient solution-processed Cu2ZnSnS4 solar cells with Cd2+ substitution. Adv. Mater. 32, e2000121 (2020).10.1002/adma.202000121 ↗
8. Yan, C. et al. Beyond 11% efficient sulfide kesterite Cu2ZnxCd1–xSnS4 solar cell: effects of cadmium alloying. ACS Energy Lett. 2, 930–936 (2017).10.1021/acsenergylett.7b00129 ↗
9. Wang, A. et al. Cd-free pure sulfide kesterite Cu2ZnSnS4 solar cell with over 800 mV open-circuit voltage enabled by phase evolution intervention. Adv. Mater. 36, e2307733 (2024).10.1002/adma.202307733 ↗
10. Hadke, S. H. et al. Synergistic effects of double cation substitution in solution-processed CZTS solar cells with over 10% efficiency. Adv. Energy Mater. 8, 1802540 (2018).10.1002/aenm.201802540 ↗
11. Kauk-Kuusik, M. et al. Cu2ZnSnS4 monograin layer solar cells for flexible photovoltaic applications. J. Mater. Chem. A 11, 23640–23652 (2023).10.1039/D3TA04541B ↗
12. Pan, X. et al. 12.3% Efficient low VOC loss pure sulfide kesterite solar cells from DMSO solution via cadmium alloying. Adv. Funct. Mater. 13, 2301780 (2023).
13. Green, M. A. et al. Solar cell efficiency tables (version 63). Prog. Photovolt. Res. Appl. 32, 3–13 (2023).10.1002/pip.3750 ↗
14. Gong, Y. et al. Identifying the origin of the VOC deficit of kesterite solar cells from the two grain growth mechanisms induced by Sn2+ and Sn4+ precursors in DMSO solution. Energy Environ. Sci. 14, 2369–2380 (2021).10.1039/D0EE03702H ↗
15. Chen, W., Dahliah, D., Rignanese, G. M. & Hautier, G. Origin of the low conversion efficiency in Cu2ZnSnS4 kesterite solar cells: the actual role of cation disorder. Energy Environ. Sci. 14, 3567–3578 (2021).10.1039/D1EE00260K ↗
16. Kim, S., Park, J.-S., Hood, S. N. & Walsh, A. Lone-pair effect on carrier capture in Cu2ZnSnS4 solar cells. J. Mater. Chem. A 7, 2686–2693 (2019).10.1039/C8TA10130B ↗
17. Li, J. et al. Unveiling microscopic carrier loss mechanisms in 12% efficient Cu2ZnSnSe4 solar cells. Nat. Energy 7, 754–764 (2022).10.1038/s41560-022-01078-7 ↗
18. Kim, S., Márquez, J. A., Unold, T. & Walsh, A. Upper limit to the photovoltaic efficiency of imperfect crystals from first principles. Energy Environ. Sci. 13, 1481–1491 (2020).10.1039/D0EE00291G ↗
19. Monserrat, B., Park, J.-S., Kim, S. & Walsh, A. Role of electron–phonon coupling and thermal expansion on band gaps, carrier mobility, and interfacial offsets in kesterite thin-film solar cells. Appl. Phys. Lett. 112, 193903 (2018).10.1063/1.5028186 ↗
20. Persson, C. Electronic and optical properties of Cu2ZnSnS4 and Cu2ZnSnSe4. J. Appl. Phys. 107, 053710 (2010).10.1063/1.3318468 ↗
21. Duan, B. W. et al. Underlying mechanism of the efficiency loss in CZTSSe solar cells: disorder and deep defects. Sci. China Mater. 63, 2371–2396 (2020).10.1007/s40843-020-1385-0 ↗
22. Ramkumar, S. P. et al. Insights into cation disorder and phase transitions in CZTS from a first-principles approach. Phys. Rev. Mater. 2, 085403 (2018).10.1103/PhysRevMaterials.2.085403 ↗
23. Bourdais, S. et al. Is the Cu/Zn disorder the main culprit for the voltage deficit in kesterite solar cells? Adv. Funct. Mater. 6, 1502276 (2016).
24. Larsen, J. K., Scragg, J. J. S., Ross, N. & Platzer-Björkman, C. Band tails and Cu–Zn disorder in Cu2ZnSnS4 solar cells. ACS Appl. Energy Mater. 3, 7520–7526 (2020).10.1021/acsaem.0c00926 ↗
25. Gokmen, T., Gunawan, O., Todorov, T. K. & Mitzi, D. B. Band tailing and efficiency limitation in kesterite solar cells. Appl. Phys. Lett. 103, 103506 (2013).10.1063/1.4820250 ↗
26. Chirilă, A. et al. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films. Nat. Mater. 10, 857–861 (2011).10.1038/nmat3122 ↗
27. Kato, T. Cu(In,Ga)(Se,S)2 solar cell research in Solar Frontier: progress and current status. Jpn J. Appl. Phys. 56, 04ca02 (2017).10.7567/JJAP.56.04CA02 ↗
28. Keller, J. et al. High-concentration silver alloying and steep back-contact gallium grading enabling copper indium gallium selenide solar cell with 23.6% efficiency. Nat. Energy 9, 467–478 (2024).10.1038/s41560-024-01472-3 ↗
29. Qi, Y. et al. Engineering of interface band bending and defects elimination via a Ag-graded active layer for efficient (Cu,Ag)2ZnSn(S,Se)4 solar cells. Energy Environ. Sci. 10, 2401–2410 (2017).10.1039/C7EE01405H ↗
30. Yuan, Z. et al. Engineering solar cell absorbers by exploring the band alignment and defect disparity: the case of Cu- and Ag-based kesterite compounds. Adv. Funct. Mater. 25, 6733–6743 (2015).10.1002/adfm.201502272 ↗
31. Yang, K. et al. A band-gap-graded CZTSSe solar cell with 12.3% efficiency. J. Mater. Chem. A 4, 10151–10158 (2016).10.1039/C6TA01558A ↗
32. Zhao, Y. et al. Controllable double gradient bandgap strategy enables high efficiency solution-processed kesterite solar cells. Adv. Funct. Mater. 34, 2311992 (2023).10.1002/adfm.202311992 ↗
33. Son, D.-H. et al. Effect of solid-H2S gas reactions on CZTSSe thin film growth and photovoltaic properties of a 12.62% efficiency device. J. Mater. Chem. A 7, 25279–25289 (2019).10.1039/C9TA08310C ↗
34. Xu, X. et al. Controlling selenization equilibrium enables high-quality kesterite absorbers for efficient solar cells. Nat. Commun. 14, 6650 (2023).10.1038/s41467-023-42460-7 ↗
35. Mangan, T. C., McCandless, B. E., Dobson, K. D. & Birkmire, R. W. Thermochemical and kinetic aspects of Cu2ZnSn(S,Se)4 thin film growth by reacting Cu–Zn–Sn precursors in H2S and H2Se. J. Appl. Phys. 118, 065303 (2015).10.1063/1.4928161 ↗
36. Guo, H. et al. Band-gap-graded Cu2ZnSn(S,Se)4 drives highly efficient solar cells. Energy Environ. Sci. 15, 693–704 (2022).10.1039/D1EE03134A ↗
37. Gong, Y. et al. Ag incorporation with controlled grain growth enables 12.5% efficient kesterite solar cell with open circuit voltage reached 64.2% Shockley–Queisser limit. Adv. Funct. Mater. 31, 2101927 (2021).10.1002/adfm.202101927 ↗
38. Su, Z. et al. Cation substitution of solution-processed Cu2ZnSnS4 thin film solar cell with over 9% efficiency. Adv. Funct. Mater. 5, 1500682 (2015).
39. Xiao, Z. et al. Bandgap engineering of Cu2CdxZn1-xSnS4 alloy for photovoltaic applications: a complementary experimental and first-principles study. J. Appl. Phys. 114, 183506 (2013).10.1063/1.4829457 ↗
40. Pilvet, M. et al. Compositionally tunable structure and optical properties of Cu1.85(CdxZn1-x)1.1SnS4.1 (0 ≤ x ≤ 1) monograin powders. Thin Solid Films 582, 180–183 (2015).10.1016/j.tsf.2014.10.091 ↗
41. Fan, P. et al. Over 10% efficient Cu2CdSnS4 solar cells fabricated from optimized sulfurization. Adv. Funct. Mater. 32, 2207470 (2022).10.1002/adfm.202207470 ↗
42. Hadke, S. et al. Suppressed deep traps and bandgap fluctuations in Cu2CdSnS4 solar cells with ≈8% efficiency. Adv. Energy Mater. 9, 1902509 (2019).10.1002/aenm.201902509 ↗
43. Shi, J. et al. Identification of high-temperature exciton states and their phase-dependent trapping behaviour in lead halide perovskites. Energy Environ. Sci. 11, 1460–1469 (2018).10.1039/C7EE03543H ↗
44. Heath, J. T., Cohen, J. D. & Shafarman, W. N. Bulk and metastable defects in CuIn1-xGaxSe2 thin films using drive-level capacitance profiling. J. Appl. Phys. 95, 1000–1010 (2004).10.1063/1.1633982 ↗
45. Shi, J. et al. Multinary alloying for facilitated cation exchange and suppressed defect formation in kesterite solar cells with above 14% certified efficiency. Nat. Energy 9, 1095–1104 (2024).
46. Gunawan, O., Todorov, T. K. & Mitzi, D. B. Loss mechanisms in hydrazine-processed Cu2ZnSn(Se,S)4 solar cells. Appl. Phys. Lett. 97, 233506 (2010).10.1063/1.3522884 ↗
47. Li, Y. et al. Exploiting electrical transients to quantify charge loss in solar cells. Joule 4, 472–489 (2020).10.1016/j.joule.2019.12.016 ↗
48. Shi, J. et al. From ultrafast to ultraslow: charge-carrier dynamics of perovskite solar cells. Joule 2, 879–901 (2018).10.1016/j.joule.2018.04.010 ↗
49. Larsen, J. K. et al. Cadmium free Cu2ZnSnS4 solar cells with 9.7% efficiency. Adv. Energy Mater. 9, 1900439 (2019).10.1002/aenm.201900439 ↗
50. Li, Y. et al. Suppressing element inhomogeneity enables 14.9% efficiency CZTSSe solar cells. Adv. Mater. 36, 2400138 (2024).10.1002/adma.202400138 ↗
51. Clark, S. J. et al. First principles methods using CASTEP. Z. Kristallogr. 220, 567–570 (2005).10.1524/zkri.220.5.567.65075 ↗
52. Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996).10.1103/PhysRevLett.77.3865 ↗
53. Govind, N., Petersen, M., Fitzgerald, G., King-Smith, D. & Andzelm, J. A generalized synchronous transit method for transition state location. Comp. Mater. Sci. 28, 250–258 (2003).10.1016/S0927-0256(03)00111-3 ↗
54. Cui, X. et al. Cd-free Cu2ZnSnS4 solar cell with an efficiency greater than 10% enabled by Al2O3 passivation layers. Energy Environ. Sci. 12, 2751–2764 (2019).10.1039/C9EE01726G ↗
55. Li, J. et al. Defect control for 12.5% efficiency Cu2ZnSnSe4 kesterite thin-film solar cells by engineering of local chemical environment. Adv. Mater. 32, 2005268 (2020).10.1002/adma.202005268 ↗
56. Sun, Y. et al. N-type surface design for p-type CZTSSe thin film to attain high efficiency. Adv. Mater. 33, 2104330 (2021).10.1002/adma.202104330 ↗