Lithium inventory tracking as a non-destructive battery evaluation and monitoring method
Source abstract
Abstract
Charge and discharge cycles of Li-NMC 811 cells.
The source flagged this abstract for review. Check formulas and completeness against the original publication.
Source: openaire · Quality: needs review · Source record ↗
Source flags: short_text
Source flags: short_text
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advanced Battery Technologies Research · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Xiao, J. et al. Understanding and applying coulombic efficiency in lithium metal batteries. Nat. Energy 5, 561–568 (2020).10.1038/s41560-020-0648-z ↗
2. Tornheim, A. & O’Hanlon, D. C. What do coulombic efficiency and capacity retention truly measure? A deep dive into cyclable lithium inventory, limitation type, and redox side reactions. J. Electrochem. Soc. 167, 110520 (2020).10.1149/1945-7111/ab9ee8 ↗
3. Bond, T. M., Burns, J. C., Stevens, D. A., Dahn, H. M. & Dahn, J. R. Improving precision and accuracy in coulombic efficiency measurements of Li-ion batteries. J. Electrochem. Soc. 160, A521–A527 (2013).10.1149/2.014304jes ↗
4. Smith, A. J., Burns, J. C., Trussler, S. & Dahn, J. R. Precision measurements of the coulombic efficiency of lithium-ion batteries and of electrode materials for lithium-ion batteries. J. Electrochem. Soc. 157, A196–A202 (2010).10.1149/1.3268129 ↗
5. Gyenes, B., Stevens, D. A., Chevrier, V. L. & Dahn, J. R. Understanding anomalous behavior in coulombic efficiency measurements on Li-ion batteries. J. Electrochem. Soc. 162, A278–A283 (2015).10.1149/2.0191503jes ↗
6. Adams, B. D., Zheng, J., Ren, X., Xu, W. & Zhang, J. G. Accurate determination of coulombic efficiency for lithium metal anodes and lithium metal batteries. Adv. Energy Mater. 8, 1702097 (2018).10.1002/aenm.201702097 ↗
7. Li, X. et al. Review on comprehending and enhancing the initial coulombic efficiency of anode materials in lithium-ion/sodium-ion batteries. Nano Energy 77, 105143 (2020).10.1016/j.nanoen.2020.105143 ↗
8. Li, Z., Huang, J., Liaw, B. Y. & Zhang, J. On state-of-charge determination for lithium-ion batteries. J. Power Sources 348, 281–301 (2017).10.1016/j.jpowsour.2017.03.001 ↗
9. Dubarry, M., Vuillaume, N. & Liaw, B. Y. Origins and accommodation of cell variations in Li-ion battery pack modeling. Int. J. Energy Res. 34, 216–231 (2010).10.1002/er.1668 ↗
10. Dubarry, M., Svoboda, V., Hwu, R. & Liaw, B. Y. Capacity loss in rechargeable lithium cells during cycle life testing: the importance of determining state-of-charge. J. Power Sources 174, 1121–1125 (2007).10.1016/j.jpowsour.2007.06.185 ↗
11. Dubarry, M. et al. Evaluation of commercial lithium-ion cells based on composite positive electrode for plug-in hybrid electric vehicle applications. Part I: Initial characterizations. J. Power Sources 196, 10328–10335 (2011).10.1016/j.jpowsour.2011.08.077 ↗
12. Wang, F. et al. Does polarization increase lead to capacity fade? J. Electrochem. Soc. 167, 090549 (2020).10.1149/1945-7111/ab956b ↗
13. Zhang, Y. et al. A quantitative failure analysis on capacity fade in rechargeable lithium metal cells. J. Electrochem. Soc. 167, 090502 (2020).10.1149/1945-7111/ab6cf4 ↗
14. Zhang, Y. et al. Cell qualification—a performance metric-based approach. J. Phys. Energy 2, 034003 (2020).10.1088/2515-7655/ab979b ↗
15. Liu, J. et al. Pathways for practical high-energy long-cycling lithium metal batteries. Nat. Energy 4, 180–186 (2019).10.1038/s41560-019-0338-x ↗
16. Kasnatscheew, J. et al. The truth about the 1st cycle coulombic efficiency of LiNi1/3Co1/3Mn1/3O2 (NCM) cathodes. Phys. Chem. Chem. Phys. 18, 3956–3965 (2016).10.1039/C5CP07718D ↗
17. Kang, S.-H., Yoon, W.-S., Nam, K.-W., Yang, X.-Q. & Abraham, D. P. Investigating the first-cycle irreversibility of lithium metal oxide cathodes for Li batteries. J. Mater. Sci. 43, 4701–4706 (2008).10.1007/s10853-007-2355-6 ↗
18. Choi, J. & Manthiram, A. Investigation of the irreversible capacity loss in the layered LiNi1/3Co1/3Mn1/3O2 cathodes. Electrochem. Solid State Lett. 8, C102–C105 (2005).10.1149/1.1943567 ↗
19. Zhang, S. S., Xu, K. & Jow, T. R. Formation of solid electrolyte interface in lithium nickel mixed oxide electrodes during the first cycling. Electrochem. Solid State Lett. 5, A92–A94 (2002).10.1149/1.1464506 ↗
20. Lee, K.-K. & Kim, K.-B. Electrochemical and structural characterization of LiNi1–2yCoyO2 (0 ≤ y ≤ 0.2) positive electrodes during initial cycling. J. Electrochem. Soc. 147, 1709–1717 (2000).10.1149/1.1393422 ↗
21. Arai, H., Okada, S., Sakurai, Y. & Yamaki, J.-I. Reversibility of LiNiO2 cathode. Solid State Ion. 95, 275–282 (1997).10.1016/S0167-2738(96)00598-X ↗
22. Xin, F. et al. Li–Nb–O coating/substitution enhances the electrochemical performance of the LiNi0.8Mn0.1Co0.1O2 (NMC 811) cathode. ACS Appl. Mater. Interfaces 11, 34889–34894 (2019).10.1021/acsami.9b09696 ↗
23. Zhou, H., Xin, F., Pei, B. & Whittingham, M. S. What limits the capacity of layered oxide cathodes in lithium batteries? ACS Energy Lett. 4, 1902–1906 (2019).10.1021/acsenergylett.9b01236 ↗
24. Märker, K., Reeves, P. J., Xu, C., Griffith, K. J. & Grey, C. P. Evolution of structure and lithium dynamics in LiNi0.8Mn0.1Co0.1O2 (NMC 811) cathodes during electrochemical cycling. Chem. Mater. 31, 2545–2554 (2019).10.1021/acs.chemmater.9b00140 ↗
25. Weppner, W. & Huggins, R. A. Determination of the kinetic parameters of mixed-conducting electrodes and application to the system Li3Sb. J. Electrochem. Soc. 124, 1569–1578 (1977).10.1149/1.2133112 ↗
26. Huggins, R. A. Advanced Batteries: Materials Science Aspects (Springer, 2008); https://doi.org/10.1007/978-0-387-76424-510.1007/978-0-387-76424-5 ↗
27. Li, Z. et al. Synchrotron operando depth profiling studies of state-of-charge gradients in thick Li(Ni0.8Mn0.1Co0.1)O2 cathode films. Chem. Mater. 32, 6358–6364 (2020).10.1021/acs.chemmater.0c00983 ↗
28. Mao, Y. et al. High-voltage charging-induced strain, heterogeneity, and micro-cracks in secondary particles of a nickel-rich layered cathode material. Adv. Funct. Mater. 29, 1900247 (2019).10.1002/adfm.201900247 ↗
29. Wu, F. et al. Removing the intrinsic NiO phase and residual lithium for high-performance nickel-rich materials. Energy Mater. Adv. 4, 0007 (2023).10.34133/energymatadv.0007 ↗
30. Rahimi Eichi H. & Chow, M.-Y. Modeling and analysis of battery hysteresis effects. In Proc. 2012 IEEE Energy Conversion Congress and Exposition 4479–4486 (IEEE, 2012).10.1109/ECCE.2012.6342212 ↗
31. Lim, J. et al. Origin and hysteresis of lithium compositional spatiodynamics within battery primary particles. Science 353, 566–571 (2016).10.1126/science.aaf4914 ↗
32. Hess, M., Sasaki, T., Villevieille, C. & Novák, P. Combined operando X-ray diffraction-electrochemical impedance spectroscopy detecting solid solution reactions of LiFePO4 in batteries. Nat. Commun. 6, 8169 (2015).10.1038/ncomms9169 ↗
33. Ovejas, V. J. & Cuadras, A. Effects of cycling on lithium-ion battery hysteresis and overvoltage. Sci. Rep. 9, 14875 (2019).10.1038/s41598-019-51474-5 ↗
34. Fang, Z. et al. Formation of surface impurities on lithium-nickel-manganese-cobalt oxides in the presence of CO2 and H2O. J. Am. Chem. Soc. 143, 10261–10274 (2021).10.1021/jacs.1c03812 ↗
35. Gering, K. L. et al. Investigation of path dependence in commercial lithium-ion cells chosen for plug-in hybrid vehicle duty cycle protocols. J. Power Sources 196, 3395–3403 (2011).10.1016/j.jpowsour.2010.05.058 ↗
36. Su, L. et al. Path dependence of lithium ion cells aging under storage conditions. J. Power Sources 315, 35–46 (2016).10.1016/j.jpowsour.2016.03.043 ↗