Carrier management through electrode and electron-selective layer engineering for 10.70% efficiency antimony selenosulfide solar cells
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Liu, S. et al. Buried interface molecular hybrid for inverted perovskite solar cells. Nature 632, 536–542 (2024).10.1038/s41586-024-07723-3 ↗
2. Keller, J. et al. High-concentration silver alloying and steep back-contact gallium grading enabling copper indium gallium selenide solar cell with 23.6% efficiency. Nat. Energy 9, 467–478 (2024).10.1038/s41560-024-01472-3 ↗
3. Green, M. A. et al. Solar cell efficiency tables (version 65). Prog. Photovolt. Res. Appl. 33, 3–15 (2025).10.1002/pip.3867 ↗
4. Shi, J. et al. Multinary alloying for facilitated cation exchange and suppressed defect formation in kesterite solar cells with above 14% certified efficiency. Nat. Energy 9, 1095–1104 (2024).
5. Tang, R. et al. Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency. Nat. Energy 5, 587–595 (2020).10.1038/s41560-020-0652-3 ↗
6. Zhou, Y. et al. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries. Nat. Photon. 9, 409–415 (2015).10.1038/nphoton.2015.78 ↗
7. Kondrotas, R. et al. Sb2S3 solar cells. Joule 2, 857–878 (2018).10.1016/j.joule.2018.04.003 ↗
8. Wang, X. et al. Upper efficiency limit of Sb2Se3 solar cells. Joule 8, 2105–2122 (2024).10.1016/j.joule.2024.05.004 ↗
9. Chen, C. et al. Open-circuit voltage loss of antimony chalcogenide solar cells: status, origin, and possible solutions. ACS Energy Lett. 5, 2294–2304 (2020).10.1021/acsenergylett.0c00940 ↗
10. Qian, C. et al. Bifacial and semitransparent Sb2(S,Se)3 solar cells for single-junction and tandem photovoltaic applications. Adv. Mater. 35, 2303936 (2023).10.1002/adma.202303936 ↗
11. Wang, W. et al. Over 6% certified Sb2(S,Se)3 solar cells fabricated via in situ hydrothermal growth and postselenization. Adv. Electron. Mater. 5, 1800683 (2019).10.1002/aelm.201800683 ↗
12. Zhao, Y. et al. Innovative in situ passivation strategy for high-efficiency Sb2(S,Se)3 solar cells. Adv. Mater. 36, 2410669 (2024).10.1002/adma.202410669 ↗
13. Dong, J. et al. Low-cost antimony selenosulfide with tunable bandgap for highly efficient solar cells. Small 19, 2206175 (2023).10.1002/smll.202206175 ↗
14. Liu, C. et al. Heterojunction lithiation engineering and diffusion-induced defect passivation for highly efficient Sb2(S,Se)3 solar cells. Energy Environ. Sci. 17, 8402–8412 (2024).10.1039/D4EE03135K ↗
15. Zhou, J. et al. Control of the phase evolution of kesterite by tuning of the selenium partial pressure for solar cells with 13.8% certified efficiency. Nat. Energy 8, 526–535 (2023).10.1038/s41560-023-01251-6 ↗
16. Jehl, Z. et al. Thinning of CIGS solar cells: part II: cell characterizations. Thin Solid Films 519, 7212–7215 (2011).10.1016/j.tsf.2010.12.224 ↗
17. Bothwell, A. M. et al. Performance analysis of 0.4–1.2-μm CdTe solar cells. IEEE J. Photovolt. 10, 259–266 (2020).10.1109/JPHOTOV.2019.2947556 ↗
18. Chen, Z. et al. The effect of absorber thickness on the planar Sb2S3 thin film solar cell: trade-off between light absorption and charge separation. Sol. Energy 201, 323–329 (2020).10.1016/j.solener.2020.02.074 ↗
19. Kambe, M. et al. Fabrication of A-Si:H solar cells on high haze SnO2:F thin films. In 2008 33rd IEEE Photovoltaic Specialists Conference 1–4 (IEEE, 2008).10.1109/PVSC.2008.4922507 ↗
20. Kim, M. et al. Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells. Science 375, 302–306 (2022).10.1126/science.abh1885 ↗
21. Ge, Y. et al. Suppressing wide-angle light loss and non-radiative recombination for efficient perovskite solar cells. Nat. Photon. 19, 170–177 (2025).10.1038/s41566-024-01570-4 ↗
22. Isabella, O. et al. Modulated surface textures for enhanced light trapping in thin-film silicon solar cells. Appl. Phys. Lett. 97, 101106 (2010).10.1063/1.3488023 ↗
23. Tamang, A. et al. Light-trapping and interface morphologies of amorphous silicon solar cells on multiscale surface textured substrates. IEEE J. Photovolt. 4, 16–21 (2014).10.1109/JPHOTOV.2013.2280020 ↗
24. Jin, X. et al. Controllable solution-phase epitaxial growth of Q1D Sb2(S,Se)3/CdS heterojunction solar cell with 9.2% efficiency. Adv. Mater. 33, 2104346 (2021).10.1002/adma.202104346 ↗
25. Cao, Z. et al. Anomalous electron doping in CdS to promote the efficiency improvement in Sb2Se3 thin film solar cells. Adv. Funct. Mater. 35, 2418974 (2025).10.1002/adfm.202418974 ↗
26. Li, J. et al. Hydrazine hydrate-induced surface modification of CdS electron transport layer enables 10.30%-efficient Sb2(S,Se)3 planar solar cells. Adv. Sci. 9, 2202356 (2022).10.1002/advs.202202356 ↗
27. Zhao, Y. et al. Zinc-based electron transport materials for over 9.6%-efficient S-rich Sb2(S,Se)3 solar cells. J. Mater. Chem. A 9, 12644–12651 (2021).10.1039/D1TA02356J ↗
28. Waleed, A. et al. Performance improvement of solution-processed CdS/CdTe solar cells with a thin compact TiO2 buffer layer. Sci. Bull. 61, 86–91 (2016).10.1007/s11434-015-0963-0 ↗
29. Kartopu, G. et al. Enhancement of the photocurrent and efficiency of CdTe solar cells suppressing the front contact reflection using a highly-resistive ZnO buffer layer. Sol. Energy Mater. Sol. Cells 191, 78–82 (2019).10.1016/j.solmat.2018.11.002 ↗
30. Naghavi, N. et al. Buffer layers and transparent conducting oxides for chalcopyrite Cu(In,Ga)(S,Se)2 based thin film photovoltaics: present status and current developments. Prog. Photovolt. Res. Appl. 18, 411–433 (2010).10.1002/pip.955 ↗
31. Yao, Y. et al. Achieving over 860 mV open-circuit voltage in low-Ag wide-bandgap Cu(In,Ga)Se2 solar cells through ion diffusion and band structure optimization. Adv. Funct. Mater. https://doi.org/10.1002/adfm.202423228 (2025).10.1002/adfm.202423228 ↗
32. Rau, U. et al. Electronic properties of ZnO/CdS/Cu(In,Ga)Se2 solar cells-aspects of heterojunction formation. Thin Solid Films 387, 141–146 (2001).10.1016/S0040-6090(00)01737-5 ↗
33. Ishizuka, S. et al. Fabrication of wide-gap Cu(In1−xGax)Se2 thin film solar cells: a study on the correlation of cell performance with highly resistive i-ZnO layer thickness. Sol. Energy Mater. Sol. Cells 87, 541–548 (2005).10.1016/j.solmat.2004.08.017 ↗
34. Tseng, P. C. et al. Angle-resolved characteristics of silicon photovoltaics with passivated conical-frustum nanostructures. Sol. Energy Mater. Sol. Cells 95, 2610–2615 (2011).10.1016/j.solmat.2011.05.010 ↗
35. Lv, K. et al. Effect of thickness and Se distribution of Sb2S3−ySey thin films to solar cell efficiency. Mater. Today Energy 36, 101367 (2023).10.1016/j.mtener.2023.101367 ↗
36. Zhao, Y. et al. Regulating energy band alignment via alkaline metal fluoride assisted solution post-treatment enabling Sb2(S,Se)3 solar cells with 10.7% efficiency. Adv. Energy Mater. 12, 2103015 (2022).10.1002/aenm.202103015 ↗
37. Dong, J. et al. Lowest open-circuit voltage deficit achievement to attain high efficient antimony selenosulfide solar cells. Adv. Funct. Mater. 34, 2309764 (2024).10.1002/adfm.202309764 ↗
38. Neupane, S. et al. Ex situ bismuth doping for efficient CdSeTe thin-film solar cells with open-circuit voltages exceeding 900 mV. Joule 9, 101766 (2025).10.1016/j.joule.2024.09.013 ↗
39. Luo, D. et al. Minimizing non-radiative recombination losses in perovskite solar cells. Nat. Rev. Mater. 5, 44–60 (2020).10.1038/s41578-019-0151-y ↗
40. Zhu, J. et al. A donor-acceptor-type hole-selective contact reducing non-radiative recombination losses in both subcells towards efficient all-perovskite tandems. Nat. Energy 8, 714–724 (2023).10.1038/s41560-023-01274-z ↗
41. Wang, W. et al. Double interface modification promotes efficient Sb2Se3 solar cell by tailoring band alignment and light harvest. J. Energy Chem. 70, 191–200 (2022).10.1016/j.jechem.2022.02.013 ↗
42. Yu, H. et al. Superfast room-temperature activation of SnO2 thin films via atmospheric plasma oxidation and their application in planar perovskite photovoltaics. Adv. Mater. 30, 1704825 (2018).10.1002/adma.201704825 ↗
43. Paik, M. J. et al. Ultrafine SnO2 colloids with enhanced interface quality for high-efficiency perovskite solar cells. Joule 8, 2073–2086 (2024).10.1016/j.joule.2024.04.010 ↗
44. Gao, D. et al. Long-term stability in perovskite solar cells through atomic layer deposition of tin oxide. Science 386, 187–192 (2024).10.1126/science.adq8385 ↗
45. Park, S. M. et al. Low-loss contacts on textured substrates for inverted perovskite solar cells. Nature 624, 289–294 (2023).10.1038/s41586-023-06745-7 ↗
46. Lan, Z. et al. Homogenizing the electron extraction via eliminating low-conductive contacts enables efficient perovskite solar cells with reduced up-scaling losses. Adv. Funct. Mater. 34, 2316591 (2024).10.1002/adfm.202316591 ↗
47. Lian, W. et al. Probing the trap states in n–i–p Sb2(S,Se)3 solar cells by deep-level transient spectroscopy. J. Chem. Phys. 153, 124703 (2020).10.1063/5.0020244 ↗
48. Lian, W. et al. Distinctive deep-level defects in non-stoichiometric Sb2Se3 photovoltaic materials. Adv. Sci. 9, 2105268 (2022).10.1002/advs.202105268 ↗
49. Huang, M. et al. Complicated and unconventional defect properties of the quasi-one-dimensional photovoltaic semiconductor Sb2Se3. ACS Appl. Mater. Interfaces 11, 15564–15572 (2019).10.1021/acsami.9b01220 ↗
50. Wang, J. et al. Pd(II)/Pd(IV) redox shuttle to suppress vacancy defects at grain boundaries for efficient kesterite solar cells. Nat. Commun. 15, 4344 (2024).10.1038/s41467-024-48850-9 ↗
51. Shen, G. et al. Strong chelating additive and modified electron transport layer for 8.26%-efficient Sb2S3 solar cells. Adv. Energy Mater. https://doi.org/10.1002/aenm.202406051 (2025).10.1002/aenm.202406051 ↗
52. Gu, Y. et al. Solvent annealing enabling reconstruction of cadmium sulfide film for improved heterojunction quality and photovoltaic performance of antimony selenosulfide solar cells. Adv. Funct. Mater. 34, 2311577 (2024).10.1002/adfm.202311577 ↗
53. Chen, G. et al. Suppressing buried interface nonradiative recombination losses toward high-efficiency antimony triselenide solar cells. Adv. Mater. 36, 2308522 (2024).10.1002/adma.202308522 ↗
54. Ding, Y. et al. Single-crystalline TiO2 nanoparticles for stable and efficient perovskite modules. Nat. Nanotechnol. 17, 598–605 (2022).10.1038/s41565-022-01108-1 ↗
55. Gong, X. et al. Highly efficient perovskite solar cells with gradient bilayer electron transport materials. Nano Lett. 18, 3969–3977 (2018).10.1021/acs.nanolett.8b01440 ↗
56. Shi, J. et al. From ultrafast to ultraslow: charge-carrier dynamics of perovskite solar cells. Joule 2, 879–901 (2018).10.1016/j.joule.2018.04.010 ↗
57. Yin, K. et al. Gradient bandgaps in sulfide kesterite solar cells enable over 13% certified efficiency. Nat. Energy 10, 105–214 (2025).
58. Liang, X. et al. Reduction of bulk and interface defects via photo-annealing treatment for high-efficiency antimony selenide solar cells. Energy Environ. Sci. 17, 9499–9508 (2024).10.1039/D4EE02877E ↗
59. Li, Z. et al. 9.2%-efficient core-shell structured antimony selenide nanorod array solar cells. Nat. Commun. 10, 125 (2019).10.1038/s41467-018-07903-6 ↗
60. Wen, X. et al. Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency. Nat. Commun. 9, 2179 (2018).10.1038/s41467-018-04634-6 ↗
61. Zhang, Y. et al. Selenium-graded Sb2(S1-xSex)3 for planar heterojunction solar cell delivering a certified power conversion efficiency of 5.71%. Sol. RRL 1, 1700017 (2017).10.1002/solr.201700017 ↗
62. Chen, C. et al. 6.5% certified efficiency Sb2Se3 solar cells using PbS colloidal quantum dot film as hole-transporting layer. ACS Energy Lett. 2, 2125–2132 (2017).10.1021/acsenergylett.7b00648 ↗
63. Chen, S. et al. A codoping strategy for efficient planar heterojunction Sb2S3 solar cells. Adv. Energy Mater. 12, 2202897 (2022).10.1002/aenm.202202897 ↗
64. Che, B. et al. Post-deposition treatment of Sb2Se3 enables defect passivation and increased carrier transport dimension for efficient solar cell application. Angew. Chem. Int. Ed. 64, e202425639 (2025).10.1002/anie.202425639 ↗
65. Shi, X. et al. Nanorod-textured Sb2(S,Se)3 bilayer with enhanced light harvesting and accelerated charge extraction for high-efficiency Sb2(S,Se)3 solar cells. Chem. Eng. J. 437, 135341 (2022).10.1016/j.cej.2022.135341 ↗
66. Wang, L. et al. Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer. Nat. Energy 2, 17046 (2017).10.1038/nenergy.2017.46 ↗