Low-temperature sintering of Ag nanoparticles for high-performance thermoelectric module design
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Heusler alloys: electronic and magnetic properties · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. DiSalvo, F. J. Thermoelectric cooling and power generation. Science 285, 703–706 (1999).10.1126/science.285.5428.703 ↗
2. Bell, L. E. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems. Science 321, 1457–1461 (2008).10.1126/science.1158899 ↗
3. Wang, X. et al. Band modulation and strain fluctuation for realizing high average zT in GeTe. Adv. Energy Mater. 12, 2201043 (2022).10.1002/aenm.202201043 ↗
4. Zhu, H. et al. Discovery of ZrCoBi based half Heuslers with high thermoelectric conversion efficiency. Nat. Commun. 9, 2497 (2018).10.1038/s41467-018-04958-3 ↗
5. Zhao, L.-D. et al. Ultrahigh power factor and thermoelectric performance in hole-doped single-crystal SnSe. Science 351, 141–144 (2016).10.1126/science.aad3749 ↗
6. Mao, J. et al. High thermoelectric cooling performance of n-type Mg3Bi2-based materials. Science 365, 495–498 (2019).10.1126/science.aax7792 ↗
7. Zhang, Q. et al. Deep defect level engineering: a strategy of optimizing the carrier concentration for high thermoelectric performance. Energy Environ. Sci. 11, 933–940 (2018).10.1039/C8EE00112J ↗
8. Yin, L. et al. Reliable n-type Mg3.2Sb1.5Bi0.49Te0.01/304 stainless steel junction for thermoelectric applications. Acta Mater. 198, 25–34 (2020).10.1016/j.actamat.2020.07.058 ↗
9. Manikam, V. R. & Cheong, K. Y. Die attach materials for high temperature applications: a review. IEEE Trans. Compon. Packag. Manuf. Technol. 1, 457–478 (2011).10.1109/TCPMT.2010.2100432 ↗
10. Lu, G.-Q., Calata, J. N., Lei, G. & Chen, X. Low-temperature and pressureless sintering technology for high-performance and high-temperature interconnection of semiconductor devices. In 2007 International Conference on Thermal, Mechanical and Multi-Physics Simulation Experiments in Microelectronics and Micro-Systems 1–5 (IEEE, 2007).10.1109/ESIME.2007.360066 ↗
11. Li, M., Xiao, Y., Zhang, Z. & Yu, J. Bimodal sintered silver nanoparticle paste with ultrahigh thermal conductivity and shear strength for high temperature thermal interface material applications. ACS Appl. Mater. Interfaces 7, 9157–9168 (2015).10.1021/acsami.5b01341 ↗
12. Jood, P., Ohta, M., Yamamoto, A. & Kanatzidis, M. G. Excessively doped PbTe with Ge-induced nanostructures enables high-efficiency thermoelectric modules. Joule 2, 1339–1355 (2018).10.1016/j.joule.2018.04.025 ↗
13. Brinkfeldt, K. et al. Sintered nano-Ag as joining material for thermoelectric modules. In Proc. 11th European Conference on Thermoelectrics (eds Amaldi, A. & Tang, F.) 71–82 (Springer, 2014).10.1007/978-3-319-07332-3_9 ↗
14. Funahashi, R. et al. Relationship between tensile strength and durability of oxide thermoelectric modules. J. Electron. Mater. 50, 3996–4005 (2021).10.1007/s11664-021-08934-4 ↗
15. Li, H. et al. Interface evolution analysis of graded thermoelectric materials joined by low temperature sintering of nano-silver paste. J. Alloys Compd. 659, 95–100 (2016).10.1016/j.jallcom.2015.11.057 ↗
16. Paknejad, S. A. & Mannan, S. H. Review of silver nanoparticle based die attach materials for high power/temperature applications. Microelectron. Reliab. 70, 1–11 (2017).10.1016/j.microrel.2017.01.010 ↗
17. Peng, P. et al. Self-oriented nanojoining of silver nanowires via surface selective activation. Part. Part. Syst. Charact. 30, 420–426 (2013).10.1002/ppsc.201200099 ↗
18. Paknejad, S., Dumas, G., West, G., Lewis, G. & Mannan, S. Microstructure evolution during 300 °C storage of sintered Ag nanoparticles on Ag and Au substrates. J. Alloys Compd. 617, 994–1001 (2014).10.1016/j.jallcom.2014.08.062 ↗
19. Lu, L., Shen, Y., Chen, X., Qian, L. & Lu, K. Ultrahigh strength and high electrical conductivity in copper. Science 304, 422–426 (2004).10.1126/science.1092905 ↗
20. Crocker, A. & Wilson, M. Microhardness in PbTe and related alloys. J. Mater. Sci. 13, 833–842 (1978).10.1007/BF00570520 ↗
21. Hu, X. et al. Power generation from nanostructured PbTe-based thermoelectrics: comprehensive development from materials to modules. Energy Environ. Sci. 9, 517–529 (2016).10.1039/C5EE02979A ↗
22. Jiang, B. et al. Realizing high-efficiency power generation in low-cost PbS-based thermoelectric materials. Energy Environ. Sci. 13, 579–591 (2020).10.1039/C9EE03410B ↗
23. Jiang, B. et al. High-entropy-stabilized chalcogenides with high thermoelectric performance. Science 371, 830–834 (2021).10.1126/science.abe1292 ↗
24. Jia, B. et al. Realizing high thermoelectric performance in non-nanostructured n-type PbTe. Energy Environ. Sci. 15, 1920–1929 (2022).10.1039/D1EE03883D ↗
25. Ben-Ayoun, D., Sadia, Y. & Gelbstein, Y. Compatibility between Co-metallized PbTe thermoelectric legs and an Ag–Cu–In brazing alloy. Materials 11, 99 (2018).10.3390/ma11010099 ↗
26. Hori, Y. & Ito, T. Fabrication of 500°C class thermoelectric module and evaluation of its high temperature stability. In 25th International Conference on Thermoelectrics 642–645 (IEEE, 2006).10.1109/ICT.2006.331223 ↗
27. Tan, G. et al. Subtle roles of Sb and S in regulating the thermoelectric properties of n‐type PbTe to high performance. Adv. Energy Mater. 7, 1700099 (2017).10.1002/aenm.201700099 ↗
28. Wang, X. et al. Organic/inorganic hybrid design as a route for promoting the Bi0.5Sb1.5Te3 for high-performance thermoelectric power generation. Adv. Funct. Mater. 32, 2200307 (2022).10.1002/adfm.202200307 ↗
29. Zhang, Q. et al. High thermoelectric performance by resonant dopant indium in nanostructured SnTe. Proc. Natl Acad. Sci. USA 110, 13261–13266 (2013).10.1073/pnas.1305735110 ↗
30. Zhu, J. et al. AgNi alloy as a suitable barrier layer material for NbFeSb-Based half-Heusler thermoelectric modules. J. Electron. Mater. 48, 6815–6822 (2019).10.1007/s11664-019-07514-x ↗
31. Sun, Y. et al. Low contact resistivity and excellent thermal stability of p-type YbMg0.8Zn1.2Sb2/Fe-Sb junction for thermoelectric applications. Acta Mater. 235, 118066 (2022).10.1016/j.actamat.2022.118066 ↗
32. Joshi, G. et al. NbFeSb-based p-type half-Heuslers for power generation applications. Energy Environ. Sci. 7, 4070–4076 (2014).10.1039/C4EE02180K ↗
33. Liu, Y. et al. Demonstration of a phonon-glass electron-crystal strategy in (Hf,Zr)NiSn half-Heusler thermoelectric materials by alloying. J. Mater. Chem. A 3, 22716–22722 (2015).10.1039/C5TA04418A ↗
34. Zhu, B. et al. Realizing record high performance in n-type Bi2Te3-based thermoelectric materials. Energy Environ. Sci. 13, 2106–2114 (2020).10.1039/D0EE01349H ↗
35. Zhang, Q. et al. Realizing a thermoelectric conversion efficiency of 12% in bismuth telluride/skutterudite segmented modules through full-parameter optimization and energy-loss minimized integration. Energy Environ. Sci. 10, 956–963 (2017).10.1039/C7EE00447H ↗
36. Liang, Z. et al. High thermoelectric energy conversion efficiency of a unicouple of n-type Mg3Bi2 and p-type Bi2Te3. Mater. Today Phys. 19, 100413 (2021).10.1016/j.mtphys.2021.100413 ↗
37. Zhu, Q. & Ren, Z. A double four-point probe method for reliable measurement of energy conversion efficiency of thermoelectric materials. Energy 191, 116599 (2020).10.1016/j.energy.2019.116599 ↗
38. Gao, B., Sun, X., Yao, C. & Mao, L. A new strategy to obtain thin ZrO2–Al2O3 composite aerogel coating with prominent high-temperature resistance and rapid heat dissipation. J. Solid State Chem. 314, 123384 (2022).10.1016/j.jssc.2022.123384 ↗
39. Knoerr, M., Kraft, S. & Schletz, A. Reliability assessment of sintered nano-silver die attachment for power semiconductors. In 12th Electronics Packaging Technology Conference 56–61 (IEEE, 2010).10.1109/EPTC.2010.5702605 ↗
40. Watanabe, T., Yanagisawa, A. & Sasaki, T. Development of Ag based brazing filler metal with low melting point. Sci. Technol. Weld. Join. 16, 502–508 (2011).10.1179/1362171811Y.0000000037 ↗
41. Buhl, S., Leinenbach, C., Spolenak, R. & Wegener, K. Microstructure, residual stresses and shear strength of diamond–steel-joints brazed with a Cu-Sn-based active filler alloy. Int. J. Refract. Met. Hard Mater. 30, 16–24 (2012).10.1016/j.ijrmhm.2011.06.006 ↗
42. Ambrose, J., Nicholas, M., Young, N. & Jenkins, S. Wetting and spreading of Ni–P brazes: effects of workpiece and braze composition. Mater. Sci. Technol. 6, 1021–1031 (1990).10.1179/026708390790189533 ↗
43. Yang, T., Shiue, R. & Wu, S. Infrared brazing of Ti50Ni50 shape memory alloy using pure Cu and Ti–15Cu–15Ni foils. Intermetallics 12, 1285–1292 (2004).10.1016/j.intermet.2004.03.020 ↗
44. Weng, W. & Chuang, T. Interfacial characteristics for brazing of aluminum matrix composites with Al-12Si filler metals. Metall. Mater. Trans. A 28, 2673–2682 (1997).10.1007/s11661-997-0024-7 ↗
45. Rowe, D. M. CRC Handbook of Thermoelectrics (CRC Press, 2018).10.1201/9781420049718 ↗
46. Brož, P. et al. Study of thermal stability of CoSb3 skutterudite by Knudsen effusion mass spectrometry. Calphad 65, 1–7 (2019).10.1016/j.calphad.2019.01.012 ↗
47. Zhang, J. et al. Mechanical properties and thermal stability of the high-thermoelectric-performance Cu2Se compound. ACS Appl. Mater. Interfaces 13, 45736–45743 (2021).10.1021/acsami.1c12533 ↗
48. Shang, H. et al. n-Type Mg3Sb2–xBix with improved thermal stability for thermoelectric power generation. Acta Mater. 201, 572–579 (2020).10.1016/j.actamat.2020.10.035 ↗
49. Zhang, F. & Saxena, S. Phase stability and thermal expansion property of FeSi2. Scr. Mater. 54, 1375–1377 (2006).10.1016/j.scriptamat.2005.11.076 ↗
50. Jiang, C. et al. Thermal stability of p-type polycrystalline Bi2Te3-based bulks for the application on thermoelectric power generation. J. Alloys Compd. 692, 885–891 (2017).10.1016/j.jallcom.2016.09.143 ↗
51. Shi, D.-l et al. Thermal stability study of Cu1.97Se superionic thermoelectric materials. J. Mater. Chem. C 8, 10221–10228 (2020).10.1039/D0TC01085E ↗
52. Tan, G. et al. High thermoelectric performance of p-type SnTe via a synergistic band engineering and nanostructuring approach. J. Am. Chem. Soc. 136, 7006–7017 (2014).10.1021/ja500860m ↗
53. Yin, K. et al. Thermal stability of Mg2Si0.3Sn0.7 under different heat treatment conditions. J. Mater. Chem. C 3, 10381–10387 (2015).10.1039/C5TC01434D ↗
54. Mi, J.-L. et al. Elaborating the crystal structures of MgAgSb thermoelectric compound: polymorphs and atomic disorders. Chem. Mater. 29, 6378–6388 (2017).10.1021/acs.chemmater.7b01768 ↗
55. Hou, S. et al. High performance wearable thermoelectric generators using Ag2Se films with large carrier mobility. Nano Energy 87, 106223 (2021).10.1016/j.nanoen.2021.106223 ↗
56. Singh, A. et al. Development of low resistance electrical contacts for thermoelectric devices based on n-type PbTe and p-type TAGS-85 ((AgSbTe2)0.15(GeTe)0.85). J. Phys. D 42, 015502 (2009).10.1088/0022-3727/42/1/015502 ↗
57. Hsieh, H.-C. et al. Joint properties enhancement for PbTe thermoelectric materials by addition of diffusion barrier. Mater. Chem. Phys. 246, 122848 (2020).10.1016/j.matchemphys.2020.122848 ↗
58. Liu, W. et al. Understanding of the contact of nanostructured thermoelectric n-type Bi2Te2.7Se0.3 legs for power generation applications. J. Mater. Chem. 1, 13093–13100 (2013).10.1039/c3ta13456c ↗
59. Wu, X. et al. A general design strategy for thermoelectric interface materials in n-type Mg3Sb1.5Bi0.5 single leg used in TEGs. Acta Mater. 226, 117616 (2022).10.1016/j.actamat.2021.117616 ↗
60. Xing, T. et al. High efficiency GeTe-based materials and modules for thermoelectric power generation. Energy Environ. Sci. 14, 995–1003 (2021).10.1039/D0EE02791J ↗
61. Bu, Z. et al. Realizing a 14% single-leg thermoelectric efficiency in GeTe alloys. Sci. Adv. 7, eabf2738 (2021).10.1126/sciadv.abf2738 ↗
62. Gu, M., Xia, X., Li, X., Huang, X. & Chen, L. Microstructural evolution of the interfacial layer in the Ti-Al/Yb0.6Co4Sb12 thermoelectric joints at high temperature. J. Alloys Compd. 610, 665–670 (2014).10.1016/j.jallcom.2014.05.087 ↗