An alcohol-dispersed conducting polymer complex for fully printable organic solar cells with improved stability
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Cheng, Y.-B., Pascoe, A., Huang, F. & Peng, Y. Print flexible solar cells. Nature 539, 488–489 (2016).10.1038/539488a ↗
2. Hou, J., Inganäs, O., Friend, R. H. & Gao, F. Organic solar cells based on non-fullerene acceptors. Nat. Mater. 17, 119–128 (2018).10.1038/nmat5063 ↗
3. Qian, D. et al. Design rules for minimizing voltage losses in high-efficiency organic solar cells. Nat. Mater. 17, 703–709 (2018).10.1038/s41563-018-0128-z ↗
4. Wang, G., Adil, M. A., Zhang, J. & Wei, Z. Large-area organic solar cells: material requirements, modular designs, and printing methods. Adv. Mater. 31, 1805089 (2019).10.1002/adma.201805089 ↗
5. Andersen, T. R. et al. Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules. Energy Environ. Sci. 7, 2925–2933 (2014).10.1039/C4EE01223B ↗
6. Li, C. et al. Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells. Nat. Energy 6, 605–613 (2021).10.1038/s41560-021-00820-x ↗
7. Zheng, Z. et al. Tandem organic solar cell with 20.2% efficiency. Joule 6, 171–184 (2022).10.1016/j.joule.2021.12.017 ↗
8. Meng, L. et al. Organic and solution-processed tandem solar cells with 17.3% efficiency. Science 361, 1094–1098 (2018).10.1126/science.aat2612 ↗
9. Guo, F. et al. ITO-free and fully solution-processed semitransparent organic solar cells with high Fill factors. Adv. Energy Mater. 3, 1062–1067 (2013).10.1002/aenm.201300100 ↗
10. Carlé, J. E. et al. Overcoming the scaling lag for polymer solar cells. Joule 1, 274–289 (2017).10.1016/j.joule.2017.08.002 ↗
11. Czolk, J., Landerer, D., Koppitz, M., Nass, D. & Colsmann, A. Highly efficient, mechanically flexible, semi-transparent organic solar cells doctor Bbaded from non-halogenated solvents. Adv. Mater. Technol. 1, 1600184 (2016).10.1002/admt.201600184 ↗
12. Eggenhuisen, T. M. et al. High efficiency, fully inkjet printed organic solar cells with freedom of design. J. Mater. Chem. A 3, 7255–7262 (2015).10.1039/C5TA00540J ↗
13. Strohm, S. et al. P3HT: non-fullerene acceptor based large area, semi-transparent PV modules with power conversion efficiencies of 5%, processed by industrially scalable methods. Energy Environ. Sci. 11, 2225–2234 (2018).10.1039/C8EE01150H ↗
14. Park, S. et al. Progress in materials, solution processes, and long-term stability for large-area organic photovoltaics. Adv. Mater. 32, 2002217 (2020).10.1002/adma.202002217 ↗
15. Sun, L. et al. Flexible all-solution-processed organic solar cells with high-performance nonfullerene active layers. Adv. Mater. 32, 1907840 (2020).10.1002/adma.201907840 ↗
16. Guo, X. & Facchetti, A. The journey of conducting polymers from discovery to application. Nat. Mater. 19, 922–928 (2020).10.1038/s41563-020-0778-5 ↗
17. Jiang, Y., Liu, T. & Zhou, Y. Recent advances of synthesis, properties, film fabrication methods, modifications of poly(3,4-ethylenedioxythiophene), and applications in solution-processed photovoltaics. Adv. Funct. Mater. 30, 2006213 (2020).10.1002/adfm.202006213 ↗
18. Sun, K. et al. Review on application of PEDOTs and PEDOT:PSS in energy conversion and storage devices. J. Mater. Sci.: Mater. Electron. 26, 4438–4462 (2015).
19. Cameron, J. & Skabara, P. J. The damaging effects of the acidity in PEDOT:PSS on semiconductor device performance and solutions based on non-acidic alternatives. Mater. Horiz. 7, 1759–1772 (2020).10.1039/C9MH01978B ↗
20. de Jong, M. P., van Ijzendoorn, L. J. & de Voigt, M. J. A. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes. Appl. Phys. Lett. 77, 2255–2257 (2000).10.1063/1.1315344 ↗
21. Kim, S., Kim, S. Y., Chung, M. H., Kim, J. & Kim, J. H. A one-step roll-to-roll process of stable AgNW/PEDOT:PSS solution using imidazole as a mild base for highly conductive and transparent films: optimizations and mechanisms. J. Mater. Chem. C. 3, 5859–5868 (2015).10.1039/C5TC00801H ↗
22. van der Poll, T. S., Love, J. A., Nguyen, T.-Q. & Bazan, G. C. Non-basic high-performance molecules for solution-processed organic solar cells. Adv. Mater. 24, 3646–3649 (2012).10.1002/adma.201201127 ↗
23. Du, X. et al. Overcoming interfacial losses in solution-processed organic multi-junction solar cells. Adv. Energy Mater. 7, 1601959 (2017).10.1002/aenm.201601959 ↗
24. Mochizuki, Y., Horii, T. & Okuzaki, H. Effect of pH on structure and conductivity of PEDOT/PSS. Trans. Mater. Res. Soc. Japan 37, 307–310 (2012).10.14723/tmrsj.37.307 ↗
25. Moet, D. J. D., de Bruyn, P. & Blom, P. W. M. High work function transparent middle electrode for organic tandem solar cells. Appl. Phys. Lett. 96, 153504 (2010).10.1063/1.3387863 ↗
26. Cheng, P. & Zhan, X. Stability of organic solar cells: challenges and strategies. Chem. Soc. Rev. 45, 2544–2582 (2016).10.1039/C5CS00593K ↗
27. Adams, J. et al. Water ingress in encapsulated inverted organic solar cells: correlating infrared imaging and photovoltaic performance. Adv. Energy Mater. 5, 1501065 (2015).10.1002/aenm.201501065 ↗
28. Züfle, S. et al. An effective area approach to model lateral degradation in organic solar cells. Adv. Energy Mater. 5, 1500835 (2015).10.1002/aenm.201500835 ↗
29. Nikolka, M. et al. High operational and environmental stability of high-mobility conjugated polymer field-effect transistors through the use of molecular additives. Nat. Mater. 16, 356–362 (2017).10.1038/nmat4785 ↗
30. Zuo, G., Linares, M., Upreti, T. & Kemerink, M. General rule for the energy of water-induced traps in organic semiconductors. Nat. Mater. 18, 588–593 (2019).10.1038/s41563-019-0347-y ↗
31. Maisch, P. et al. A generic surfactant-free approach to overcome wetting limitations and its application to improve inkjet-printed P3HT:non-fullerene acceptor PV. J. Mater. Chem. A 7, 13215–13224 (2019).10.1039/C9TA02209K ↗
32. Murray-Rust, D. M. & Hartley, H. B. The dissociation of acids in methyl and in ethyl alcohol. Proc. R. Soc. London A 126, 84–106 (1929).10.1098/rspa.1929.0206 ↗
33. Ferrell, W. H., Kushner, D. I. & Hickner, M. A. Investigation of polymer–solvent interactions in poly(styrene sulfonate) thin films. J. Polym. Sci. B 55, 1365–1372 (2017).10.1002/polb.24383 ↗
34. Barton, A. F. M. Solubility parameters. Chem. Rev. 75, 731–753 (1975).10.1021/cr60298a003 ↗
35. Kusoglu, A. & Weber, A. Z. New insights into perfluorinated sulfonic-acid ionomers. Chem. Rev. 117, 987–1104 (2017).10.1021/acs.chemrev.6b00159 ↗
36. Hou, X. et al. Improvement of the power conversion efficiency and long term stability of polymer solar cells by incorporation of amphiphilic Nafion doped PEDOT-PSS as a hole extraction layer. J. Mater. Chem. A 3, 18727–18734 (2015).10.1039/C5TA03967C ↗
37. Lee, T. W., Chung, Y., Kwon, O. & Park, J. J. Self-organized gradient hole injection to improve the performance of polymer electroluminescent devices. Adv. Funct. Mater. 17, 390–396 (2007).10.1002/adfm.200600278 ↗
38. Cho, H. et al. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes. Science 350, 1222–1225 (2015).10.1126/science.aad1818 ↗
39. Lim, K.-G., Ahn, S., Kim, Y.-H., Qi, Y. & Lee, T.-W. Universal energy level tailoring of self-organized hole extraction layers in organic solar cells and organic–inorganic hybrid perovskite solar cells. Energy Environ. Sci. 9, 932–939 (2016).10.1039/C5EE03560K ↗
40. Li, W.-L. et al. Perfluorinated ionomer and poly(3,4-ethylenedioxythiophene) colloid as a hole transporting layer for optoelectronic devices. J. Mater. Chem. A 9, 17967–17977 (2021).10.1039/D1TA04362E ↗
41. Howells, C. T. et al. Influence of perfluorinated ionomer in PEDOT:PSS on the rectification and degradation of organic photovoltaic cells. J. Mater. Chem. A 6, 16012–16028 (2018).10.1039/C8TA04098B ↗
42. Tang, H., Shang, Y., Zhou, W., Peng, Z. & Ning, Z. Energy level tuning of PEDOT:PSS for high performance tin–lead mixed perovskite solar cells. Sol. RRL 3, 1800256 (2019).10.1002/solr.201800256 ↗
43. Yeo, R. S. Dual cohesive energy densities of perfluorosulphonic acid (Nafion) membrane. Polymer 21, 432–435 (1980).10.1016/0032-3861(80)90015-4 ↗
44. Hotchkiss, P. J. et al. The modification of indium tin oxide with phosphonic acids: mechanism of binding, tuning of surface properties, and potential for use in organic electronic applications. Acc. Chem. Res. 45, 337–346 (2012).10.1021/ar200119g ↗
45. Tan, J.-K., Png, R.-Q., Zhao, C. & Ho, P. K. H. Ohmic transition at contacts key to maximizing fill factor and performance of organic solar cells. Nat. Commun. 9, 3269 (2018).10.1038/s41467-018-05200-w ↗
46. Friedel, B. et al. Effects of layer thickness and annealing of PEDOT:PSS layers in organic photodetectors. Macromolecules 42, 6741–6747 (2009).10.1021/ma901182u ↗
47. Qin, F. et al. Robust metal ion-chelated polymer interfacial layer for ultraflexible non-fullerene organic solar cells. Nat. Commun. 11, 4508 (2020).10.1038/s41467-020-18373-0 ↗