Additive engineering for robust interphases to stabilize high-Ni layered structures at ultra-high voltage of 4.8 V
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Wu, L. et al. Structural origin of overcharge-induced thermal instability of Ni-containing layered-cathodes for high-energy-density lithium batteries. Chem. Mater. 23, 3953–3960 (2011).10.1021/cm201452q ↗
2. Nam, K.-W. et al. Combining in situ synchrotron X-ray diffraction and absorption techniques with transmission electron microscopy to study the origin of thermal instability in overcharged cathode materials for lithium-ion batteries. Adv. Funct. Mater. 23, 1047–1063 (2013).10.1002/adfm.201200693 ↗
3. Lin, F. et al. Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries. Nat. Commun. 5, 3529 (2014).10.1038/ncomms4529 ↗
4. Mao, Y. et al. High‐voltage charging‐induced strain, heterogeneity, and micro‐cracks in secondary particles of a nickel‐rich layered cathode material. Adv. Funct. Mater. 29, 1900247 (2019).10.1002/adfm.201900247 ↗
5. Tornheim, A. et al. Effect of electrolyte composition on rock salt surface degradation in NMC cathodes during high-voltage potentiostatic holds. Nano Energy 55, 216–225 (2019).10.1016/j.nanoen.2018.10.065 ↗
6. Zhang, S., Ma, J., Hu, Z., Cui, G. & Chen, L. Identifying and addressing critical challenges of high-voltage layered ternary oxide cathode materials. Chem. Mater. 31, 6033–6065 (2019).10.1021/acs.chemmater.9b01557 ↗
7. Gent, W. E. et al. Persistent state-of-charge heterogeneity in relaxed, partially charged Li1–xNi1/3Co1/3Mn1/3O2 secondary particles. Adv. Mater. 28, 6631–6638 (2016).10.1002/adma.201601273 ↗
8. Wei, C. et al. Mesoscale battery science: the behavior of electrode particles caught on a multispectral X-ray camera. Acc. Chem. Res. 51, 2484–2492 (2018).10.1021/acs.accounts.8b00123 ↗
9. Shangguan, X. et al. Additive-assisted novel dual-salt electrolyte addresses wide temperature operation of lithium–metal batteries. Small 15, 1900269 (2019).10.1002/smll.201900269 ↗
10. Yang, H. et al. Simultaneously dual modification of Ni‐rich layered oxide cathode for high‐energy lithium‐ion batteries. Adv. Funct. Mater. 29, 1808825 (2019).10.1002/adfm.201808825 ↗
11. Park, K.-J. et al. Improved cycling stability of Li[Ni0.90Co0.05Mn0.05]O2 through microstructure modification by boron doping for Li-ion batteries. Adv. Energy Mater. 8, 1801202 (2018).10.1002/aenm.201801202 ↗
12. Yan, P. et al. Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries. Nat. Energy 3, 600–605 (2018).10.1038/s41560-018-0191-3 ↗
13. Bi, Y. et al. Reversible planar gliding and microcracking in a single-crystalline Ni-rich cathode. Science 370, 1313–1317 (2020).10.1126/science.abc3167 ↗
14. Wang, W. et al. Stable cycling of high-voltage lithium-metal batteries enabled by high-concentration FEC-based electrolyte. ACS Appl. Mater. Interfaces 12, 22901–22909 (2020).10.1021/acsami.0c03952 ↗
15. Kim, K.-E. et al. A combination of lithium difluorophosphate and vinylene carbonate as reducible additives to improve cycling performance of graphite electrodes at high rates. Electrochem. Commun. 61, 121–124 (2015).10.1016/j.elecom.2015.10.013 ↗
16. Yang, B., Zhang, H., Yu, L., Fan, W. & Huang, D. Lithium difluorophosphate as an additive to improve the low temperature performance of LiNi0.5Co0.2Mn0.3O2/graphite cells. Electrochim. Acta 221, 107–114 (2016).10.1016/j.electacta.2016.10.037 ↗
17. Zhao, W. et al. Toward a stable solid-electrolyte-interfaces on nickel-rich cathodes: LiPO2F2 salt-type additive and its working mechanism for LiNi0.5Mn0.25Co0.25O2 cathodes. J. Power Sources 380, 149–157 (2018).10.1016/j.jpowsour.2018.01.041 ↗
18. Ma, L. et al. LiPO2F2 as an electrolyte additive in Li[Ni0.5Mn0.3Co0.2]O2/graphite pouch cells. J. Electrochem. Soc. 165, A891–A899 (2018).10.1149/2.0381805jes ↗
19. Liu, Y., Harlow, J. & Dahn, J. Microstructural observations of “single crystal” positive electrode materials before and after long term cycling by cross-section scanning electron microscopy. J. Electrochem. Soc. 167, 020512 (2020).10.1149/1945-7111/ab6288 ↗
20. Zhao, D. et al. New insight into the mechanism of LiPO2F2 on the interface of high-voltage cathode LiNi0.5Mn1.5O4 with truncated octahedral structure. Appl. Surf. Sci. 491, 595–606 (2019).10.1016/j.apsusc.2019.06.146 ↗
21. Fan, X. & Wang, C. High-voltage liquid electrolytes for Li batteries: progress and perspectives. Chem. Soc. Rev 50, 10486–10566 (2021).10.1039/D1CS00450F ↗
22. Suo, L. et al. Fluorine-donating electrolytes enable highly reversible 5-V-class Li metal batteries. Proc. Natl Acad. Sci. USA 115, 1156–1161 (2018).10.1073/pnas.1712895115 ↗
23. Wang, C., Meng, Y. S. & Xu, K. Perspective—fluorinating interphases. J. Electrochem. Soc. 166, A5184–A5186 (2019).10.1149/2.0281903jes ↗
24. Zhan, C., Wu, T., Lu, J. & Amine, K. Dissolution, migration, and deposition of transition metal ions in Li-ion batteries exemplified by Mn-based cathodes – a critical review. Energy Environ. Sci. 11, 243–257 (2018).10.1039/C7EE03122J ↗
25. Xu, G.-L. et al. Building ultraconformal protective layers on both secondary and primary particles of layered lithium transition metal oxide cathodes. Nat. Energy 4, 484–494 (2019).10.1038/s41560-019-0387-1 ↗
26. Li, S. et al. Targeted research on the single role of lithium bis(oxalate)borate in the film-forming process through a novel lithium salt-free electrolyte system. J. Power Sources 471, 228426 (2020).10.1016/j.jpowsour.2020.228426 ↗
27. Cui, X. et al. Antioxidation mechanism of highly concentrated electrolytes at high voltage. ACS Appl. Mater. Interfaces 13, 59580–59590 (2021).10.1021/acsami.1c19969 ↗
28. Li, N. W., Yin, Y. X., Yang, C. P. & Guo, Y. G. An artificial solid electrolyte interphase layer for stable lithium metal anodes. Adv. Mater. 28, 1853–1858 (2016).10.1002/adma.201504526 ↗
29. Hall, D. S., Self, J. & Dahn, J. R. Dielectric constants for quantum chemistry and Li-ion batteries: solvent blends of ethylene carbonate and ethyl methyl carbonate. J. Phys. Chem. C 119, 22322–22330 (2015).10.1021/acs.jpcc.5b06022 ↗
30. Zhao, W. et al. Toward a stable solid-electrolyte-interfaces on nickel-rich cathodes: LiPO2F2 salt-type additive and its working mechanism for LiNi0.5Mn0.25Co0.25O2 cathodes. J. Power Sources 380, 149–157 (2018).10.1016/j.jpowsour.2018.01.041 ↗
31. Wang, J. et al. Analyzing the mechanism of functional groups in phosphate additives on the interface of LiNi0.8Co0.15Al0.05O2 cathode materials. ACS Appl. Mater. Interfaces 13, 16939–16951 (2021).10.1021/acsami.0c21535 ↗
32. Wang, C. et al. Lithium difluorophosphate as a promising electrolyte lithium additive for high-voltage lithium-ion batteries. ACS Appl. Energy Mater. 1, 2647–2656 (2018).10.1021/acsaem.8b00342 ↗
33. Eldesoky, A., Logan, E. R., Johnson, M. B., McFarlane, C. R. M. & Dahn, J. R. Scanning micro X-ray fluorescence (μXRF) as an effective tool in quantifying Fe dissolution in LiFePO4 cells: towards a mechanistic understanding of Fe dissolution. J. Electrochem. Soc. 167, 130539 (2020).10.1149/1945-7111/abba62 ↗
34. Müller, V. et al. Effects of mechanical compression on the aging and the expansion behavior of Si/C-composite|NMC811 in different lithium-ion battery cell formats. J. Electrochem. Soc. 166, A3796–A3805 (2019).10.1149/2.1121915jes ↗
35. Harte, P. et al. Adaptation and improvement of an elemental mapping method for lithium ion battery electrodes and separators by means of laser ablation-inductively coupled plasma-mass spectrometry. Anal. Bioanal. Chem. 411, 581–589 (2019).10.1007/s00216-018-1351-9 ↗
36. Yang, S.-J. et al. Plating current density distribution of lithium metal anodes in pouch cells. J. Energy Chem. 69, 70–75 (2022).10.1016/j.jechem.2021.12.049 ↗
37. Wandt, J. et al. Transition metal dissolution and deposition in Li-ion batteries investigated by operando X-ray absorption spectroscopy. J. Mater. Chem. A 4, 18300–18305 (2016).10.1039/C6TA08865A ↗
38. Giordano, L. et al. Chemical reactivity descriptor for the oxide-electrolyte interface in Li-ion batteries. J. Phys. Chem. Lett. 8, 3881–3887 (2017).10.1021/acs.jpclett.7b01655 ↗
39. Østergaard, T. M. et al. Oxidation of ethylene carbonate on Li metal oxide surfaces. J. Phys. Chem. C 122, 10442–10449 (2018).10.1021/acs.jpcc.8b01713 ↗
40. Jiang, Z. et al. Machine-learning-revealed statistics of the particle-carbon/binder detachment in lithium-ion battery cathodes. Nat. Commun. 11, 2310 (2020).10.1038/s41467-020-16233-5 ↗
41. Li, J. et al. The impact of electrolyte additives and upper cut-off voltage on the formation of a rocksalt surface layer in LiNi0.8Mn0.1Co0.1O2 electrodes. J. Electrochem. Soc. 164, A655–A665 (2017).10.1149/2.0651704jes ↗
42. Li, S. et al. Synergistic dual-additive electrolyte enables practical lithium-metal batteries. Angew. Chem. Int. Ed. 59, 14935–14941 (2020).10.1002/anie.202004853 ↗
43. Hu, J. et al. Fundamental linkage between structure, electrochemical properties, and chemical compositions of LiNi1–x–yMnxCoyO2 cathode materials. ACS Appl. Mater. Interfaces 13, 2622–2629 (2021).10.1021/acsami.0c18942 ↗
44. Hu, J. et al. Mesoscale-architecture-based crack evolution dictating cycling stability of advanced lithium ion batteries. Nano Energy 79, 105420 (2021).10.1016/j.nanoen.2020.105420 ↗
45. Solé, V. A., Papillon, E., Cotte, M., Walter, P. & Susini, J. A multiplatform code for the analysis of energy-dispersive X-ray fluorescence spectra. Spectrochim. Acta B Spectrosc. 62, 63–68 (2007).10.1016/j.sab.2006.12.002 ↗
46. Cesar da Silva, J. et al. Efficient concentration of high-energy X-rays for diffraction-limited imaging resolution. Optica 4, 492–495 (2017).10.1364/OPTICA.4.000492 ↗
47. Cloetens, P. et al. Holotomography: quantitative phase tomography with micrometer resolution using hard synchrotron radiation X rays. Appl. Phys. Lett. 75, 2912–2914 (1999).10.1063/1.125225 ↗
48. Mirone, A., Brun, E., Gouillart, E., Tafforeau, P. & Kieffer, J. The PyHST2 hybrid distributed code for high speed tomographic reconstruction with iterative reconstruction and a priori knowledge capabilities. Nucl. Instrum. Methods Phys. Res. B 324, 41–48 (2014).10.1016/j.nimb.2013.09.030 ↗