Intercalation-conversion hybrid cathodes enabling Li–S full-cell architectures with jointly superior gravimetric and volumetric energy densities
Source abstract
Abstract
A common practise in the research of Li–S batteries is to use high electrode porosity and excessive electrolytes to boost sulfur-specific capacity. Here we propose a class of dense intercalation-conversion hybrid cathodes by combining intercalation-type Mo6S8 with conversion-type sulfur to realize a Li–S full cell. The mechanically hard Mo6S8 with fast Li-ion transport ability, high electronic conductivity, active capacity contribution and high affinity for lithium polysulfides is shown to be an ideal backbone to immobilize the sulfur species and unlock their high gravimetric capacity. Cycling stability and rate capability are reported under realistic conditions of low carbon content (~10 wt%), low electrolyte/active material ratio (~1.2 µl mg−1), low cathode porosity (~55 vol%) and high mass loading (>10 mg cm−2). A pouch cell assembled based on the hybrid cathode and a 2× excess Li metal anode is able to simultaneously deliver a gravimetric energy density of 366 Wh kg−1 and a volumetric energy density of 581 Wh l−1. Despite tremendous progress in the development of LiS batteries, their performance at the full-cell level is not as competitive as state-of-the-art Li-ion batteries. Here the authors report a full-cell architecture making use of a hybrid intercalation-conversion cathode, enabling both high volumetric and gravimetric energy densities.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Liu, X., Huang, J. Q., Zhang, Q. & Mai, L. Nanostructured metal oxides and sulfides for lithium-sulfur batteries. Adv. Mater. 29, 1601759 (2017).10.1002/adma.201601759 ↗
2. Manthiram, A., Fu, Y., Chung, S. H., Zu, C. & Su, Y. S. Rechargeable lithium-sulfur batteries. Chem. Rev. 114, 11751–11787 (2014).10.1021/cr500062v ↗
3. Zhang, S., Zhao, K., Zhu, T. & Li, J. Electrochemomechanical segradation of high-capacity battery electrode materials. Prog. Mater. Sci. 89, 479–521 (2017).10.1016/j.pmatsci.2017.04.014 ↗
4. Pang, Q., Liang, X., Kwok, C. Y., Kulisch, J. & Nazar, L. F. A comprehensive approach toward stable lithium-sulfur batteries with high volumetric energy density. Adv. Energy Mater. 7, 1601630 (2016).10.1002/aenm.201601630 ↗
5. Xue, W. et al. Gravimetric and volumetric energy densities of lithium-sulfur batteries. Curr. Opin. Electrochem. 6, 92–99 (2017).10.1016/j.coelec.2017.10.007 ↗
6. Fan, F. Y. et al. Solvent effects on polysulfide redox kinetics and ionic conductivity in lithium-sulfur batteries. J. Electrochem. Soc. 163, A3111–A3116 (2016).10.1149/2.1181614jes ↗
7. Pang, Q., Liang, X., Kwok, C. Y. & Nazar, L. F. Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes. Nat. Energy 1, 16132 (2016).10.1038/nenergy.2016.132 ↗
8. Chen, J. et al. Improving lithium-sulfur battery performance under lean electrolyte through nanoscale confinement in soft swellable gels. Nano Lett. 17, 3061–3067 (2017).10.1021/acs.nanolett.7b00417 ↗
9. McCloskey, B. D. Attainable gravimetric and volumetric energy density of Li-S and Li-ion battery cells with solid separator-protected Li metal anodes. J. Phys. Chem. Lett. 6, 4581–4588 (2015).10.1021/acs.jpclett.5b01814 ↗
10. Choi, J. W. & Aurbach, D. Promise and reality of post-lithium-ion batteries with high energy densities. Nat. Rev. Mater. 1, 16013 (2016).10.1038/natrevmats.2016.13 ↗
11. Berg, E. J., Villevieille, C., Streich, D., Trabesinger, S. & Novák, P. Rechargeable batteries: grasping for the limits of chemistry. J. Electrochem. Soc. 162, A2468–A2475 (2015).10.1149/2.0081514jes ↗
12. Ji, X., Evers, S., Black, R. & Nazar, L. F. Stabilizing lithium–sulphur cathodes using polysulphide reservoirs. Nat. Commun. 2, 325 (2011).10.1038/ncomms1293 ↗
13. Xue, W. et al. Double-oxide sulfur host for advanced lithium-sulfur batteries. Nano Energy 38, 12–18 (2017).10.1016/j.nanoen.2017.05.041 ↗
14. Tao, X. et al. Strong sulfur binding with conducting Magneli-phase Ti(n)O2(n-1) nanomaterials for improving lithium-sulfur batteries. Nano Lett. 14, 5288–5294 (2014).10.1021/nl502331f ↗
15. Wei Seh, Z. et al. Sulphur-TiO2 yolk-shell nanoarchitecture with internal void space for long-cycle lithium–sulphur batteries. Nat. Commun. 4, 1331 (2013).10.1038/ncomms2327 ↗
16. Liang, X. & Nazar, L. F. In situ reactive assembly of scalable core-shell sulfur-MnO2 composite cathodes. ACS Nano 10, 4192–4198 (2016).10.1021/acsnano.5b07458 ↗
17. Li, Z., Zhang, J. & Lou, X. W. Hollow carbon nanofibers filled with MnO2 nanosheets as efficient sulfur hosts for lithium-sulfur batteries. Angew. Chem. Int. Ed. 54, 12886–12890 (2015).10.1002/anie.201506972 ↗
18. Liang, X. et al. A highly efficient polysulfide mediator for lithium–sulfur batteries. Nat. Commun. 6, 5682 (2015).10.1038/ncomms6682 ↗
19. Ma, L. et al. Hybrid cathode architectures for lithium batteries based on TiS2 and sulfur. J. Mater. Chem. A 3, 19857–19866 (2015).10.1039/C5TA06348E ↗
20. Su, Y.-S. & Manthiram, A. Sulfur/lithium-insertion compound composite cathodes for Li-S batteries. J. Power Sources 270, 101–105 (2014).10.1016/j.jpowsour.2014.07.099 ↗
21. Zhou, G. et al. Catalytic oxidation of Li2S on the surface of metal sulfides for Li-S batteries. Proc. Natl Acad. Sci. USA 114, 840–845 (2017).10.1073/pnas.1615837114 ↗
22. Lin, Z., Liu, T. F., P., A. X. & Liang, C. D. Aligning academia and industry for unified battery performance metrics. Nat. Commun. 9, 5262 (2018).10.1038/s41467-018-07599-8 ↗
23. Zhao, Q., Zheng, J. & Archer, L. Interphases in lithium-sulfur batteries: toward deployable devices with competitive energy density and stability. ACS Energy Lett. 3, 2104–2113 (2018).10.1021/acsenergylett.8b01001 ↗
24. Pan, H. et al. Addressing passivation in lithium-sulfur battery under lean electrolyte condition. Adv. Funct. Mater. 28, 1707234 (2018).10.1002/adfm.201707234 ↗
25. Wang, H. et al. Tailored reaction route by micropore confinement for Li-S batteries operating under lean electrolyte conditions. Adv. Energy Mater. 8, 1800590 (2018).10.1002/aenm.201800590 ↗
26. Chung, S. H. & Manthiram, A. Rational design of statically and dynamically stable lithium-sulfur batteries with high sulfur loading and low electrolyte/sulfur ratio. Adv. Mater. 30, 1705951 (2018).10.1002/adma.201705951 ↗
27. Mao, Y. et al. Foldable interpenetrated metal-organic frameworks/carbon nanotubes thin film for lithium–sulfur batteries. Nat. Commun. 8, 14628 (2017).10.1038/ncomms14628 ↗
28. Chung, S.-H. & Manthiram, A. Designing lithium-sulfur cells with practically necessary parameters. Joule 2, 710–724 (2018).10.1016/j.joule.2018.01.002 ↗
29. Bai, S., Liu, X., Zhu, K., Wu, S. & Zhou, H. Metal-organic framework-based separator for lithium–sulfur batteries. Nat. Energy 1, 16094 (2016).10.1038/nenergy.2016.94 ↗
30. Xu, G. et al. Absorption mechanism of carbon-nanotube paper-titanium dioxide as a multifunctional barrier material for lithium-sulfur batteries. Nano Res. 8, 3066–3074 (2015).10.1007/s12274-015-0812-0 ↗
31. Wang, X. et al. Structural and chemical synergistic encapsulation of polysulfides enables ultralong-life lithium-sulfur batteries. Energy Environ. Sci. 9, 2533–2538 (2016).10.1039/C6EE00194G ↗
32. Peng, H. J. et al. Healing high-loading sulfur electrodes with unprecedented long cycling life: spatial heterogeneity control. J. Am. Chem. Soc. 139, 8458 (2017).10.1021/jacs.6b12358 ↗
33. Zhou, G. et al. A graphene foam electrode with high sulfur loading for flexible and high energy Li–S batteries. Nano Energy 11, 356–365 (2015).10.1016/j.nanoen.2014.11.025 ↗
34. Zhang, Q. et al. Understanding the anchoring effect of two-dimensional layered materials for lithium-sulfur batteries. Nano Lett. 15, 3780–3786 (2015).10.1021/acs.nanolett.5b00367 ↗
35. Yuan, Z. et al. Powering lithium-sulfur battery performance by propelling polysulfide redox at sulfiphilic hosts. Nano Lett. 16, 519–527 (2016).10.1021/acs.nanolett.5b04166 ↗
36. Zang, J. et al. Hollow-in-hollow carbon spheres with hollow foam-like cores for lithium-sulfur batteries. Nano Res. 8, 2663–2675 (2015).10.1007/s12274-015-0773-3 ↗
37. Li, G. et al. Chemisorption of polysulfides through redox reactions with organic molecules for lithium–sulfur batteries. Nat. Commun. 9, 705 (2018).10.1038/s41467-018-03116-z ↗
38. Pan, H. et al. Non-encapsulation approach for high-performance Li–S batteries through controlled nucleation and growth. Nat. Energy 2, 813 (2017).10.1038/s41560-017-0005-z ↗
39. Tan, G. et al. Burning lithium in CS2 for high-performing compact Li2S-graphene nanocapsules for Li–S batteries. Nat. Energy 2, 17090 (2017).10.1038/nenergy.2017.90 ↗
40. Levi, M. D. et al. Kinetic and thermodynamic studies of Mg2+ and Li+ ion insertion into the Mo6S8 chevrel phase. J. Electrochem. Soc. 151, A1044 (2004).10.1149/1.1758811 ↗
41. Suo, L. et al. ‘Water-in-salt’ electrolyte enables high-voltage aqueous lithium-ion chemistries. Science 350, 938–943 (2015).10.1126/science.aab1595 ↗
42. Mei, L. et al. Chevrel phase Mo6T8 (T = S, Se) as electrodes for advanced energy storage. Small 13, 1701441 (2017).10.1002/smll.201701441 ↗
43. Saha, P. et al. A convenient approach to Mo6S8 chevrel phase cathode for rechargeable magnesium battery. J. Electrochem. Soc. 161, A593–A598 (2014).10.1149/2.061404jes ↗
44. Peng, H.-J., Huang, J.-Q., Cheng, X.-B. & Zhang, Q. Review on high-loading and high-energy lithium-sulfur batteries. Adv. Energy Mater. 7, 1700260 (2017).10.1002/aenm.201700260 ↗
45. Cañas, N. A., Fronczek, D. N., Wagner, N., Latz, A. & Friedrich, K. A. Experimental and theoretical analysis of products and reaction intermediates of lithium-sulfur batteries. J. Phys. Chem. C 118, 12106–12114 (2014).10.1021/jp5013208 ↗
46. Rajput, N. N. et al. Elucidating the solvation structure and dynamics of lithium polysulfides resulting from competitive salt and solvent interactions. Chem. Mater. 29, 3375–3379 (2017).10.1021/acs.chemmater.7b00068 ↗
47. Pope, M. A. & Aksay, I. A. Structural design of cathodes for Li–S batteries. Adv. Energy Mater. 5, 1500124 (2015).10.1002/aenm.201500124 ↗
48. Hagen, M. et al. Lithium-sulfur cells: the gap between the state-of-the-art and the requirements for high energy battery cells. Adv. Energy Mater. 5, 1401986 (2015).10.1002/aenm.201401986 ↗
49. Eroglu, D., Zavadil, K. R. & Gallagher, K. G. Critical link between materials chemistry and cell-level design for high energy density and low cost lithium-sulfur transportation battery. J. Electrochem. Soc. 162, A982–A990 (2015).10.1149/2.0611506jes ↗
50. Suo, L. et al. Fluorine-donating electrolytes enable highly reversible 5-V-class Li metal batteries. Proc. Natl Acad. Sci. USA 115, 1156–1161 (2018).10.1073/pnas.1712895115 ↗
51. Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865 (1996).10.1103/PhysRevLett.77.3865 ↗
52. Blöchl, P. E. Projector augmented-wave method. Phys. Rev. B 50, 17953 (1994).10.1103/PhysRevB.50.17953 ↗
53. Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169 (1996).10.1103/PhysRevB.54.11169 ↗
54. Tkatchenko, A. & Scheffler, M. Accurate molecular van der Waals interactions from ground-state electron density and free-atom reference data. Phys. Rev. Lett. 102, 073005 (2009).10.1103/PhysRevLett.102.073005 ↗
55. Wan, L. F., Perdue, B. R., Apblett, C. A. & Prendergast, D. Mg desolvation and intercalation mechanism at the Mo6S8 Chevrel phase surface. Chem. Mater. 27, 5932–5940 (2015).10.1021/acs.chemmater.5b01907 ↗
56. Tarascon, J., DiSalvo, F., Murphy, D., Hull, G. & Waszczak, J. New superconducting ternary molybdenum chalcogenides in Mo6Se8, T1Mo6S8, and T1Mo6Se8. Phys. Rev. B 29, 172 (1984).10.1103/PhysRevB.29.172 ↗
57. Geng, L., Lv, G., Xing, X. & Guo, J. Reversible electrochemical intercalation of aluminum in Mo6S8. Chem. Mater. 27, 4926–4929 (2015).10.1021/acs.chemmater.5b01918 ↗