Show source-provided references
1. Emadian, SM, Onay, TT, Demirel, B. Biodegradation of bioplastics in natural environments. Waste Manag 2017;59:526–36. https://doi.org/10.1016/j.wasman.2016.10.006.
10.1016/j.wasman.2016.10.006 ↗2. Gadhave, RV, Das, A, Mahanwar, PA, Gadekar, PT. Starch based bio-plastics: the future of sustainable packaging. Open J Polym Chem 2018;08:21–33. https://doi.org/10.4236/ojpchem.2018.82003.
10.4236/ojpchem.2018.82003 ↗3. Ashok, A, Abhijith, R, Rejeesh, CR. Material characterization of starch derived bio degradable plastics and its mechanical property estimation. Mater Today Proc 2018;5:2163–70. https://doi.org/10.1016/j.matpr.2017.09.214.
10.1016/j.matpr.2017.09.214 ↗4. Xin, Z, Tsuda, T, Doi, H. Evaluating the effects of air pollution from a plastic recycling facility on the health of nearby residents. Acta Med Okayama 2017;71:209–17. https://doi.org/10.18926/AMO/55203.
5. Ahmed, T, Shahid, M, Azeem, F, Rasul, I, Shah, AA, Noman, M, et al.. Biodegradation of plastics: current scenario and future prospects for environmental safety. Environ Sci Pollut Control Ser 2018;25:7287–98. https://doi.org/10.1007/s11356-018-1234-9.
10.1007/s11356-018-1234-9 ↗6. Hopewell, J, Dvorak, R, Kosior, E. Plastics recycling: challenges and opportunities. Phil Trans Biol Sci 2009;364:2115–26. https://doi.org/10.1098/rstb.2008.0311.
10.1098/rstb.2008.0311 ↗7. Tabassum, N, Rafique, U, Qayyum, M, Mohammed, AAA, Asif, S, Bokhari, A. Kaolin–polyvinyl alcohol–potato starch composite films for environmentally friendly packaging: optimization and characterization. J Compos Sci 2024;8:29. https://doi.org/10.3390/jcs8010029.
10.3390/jcs8010029 ↗8. Geyer, R, Jambeck, JR, Law, KL. Production, use, and fate of all plastics ever made. Sci Adv 2017;3:e1700782. https://doi.org/10.1126/sciadv.1700782.
10.1126/sciadv.1700782 ↗9. Ismail, NA, Mohd Tahir, S, Norihan, Y, Abdul Wahid, MF, Khairuddin, NE, Hashim, I, et al.. Synthesis and characterization of biodegradable starch-based bioplastics. Mater Sci Forum 2016;846:673–8. https://doi.org/10.4028/www.scientific.net/msf.846.673.
10.4028/www.scientific.net/MSF.846.673 ↗10. Fahim, IS, Chbib, H, Mahmoud, HM. The synthesis, production & economic feasibility of manufacturing PLA from agricultural waste. Sustain Chem Pharm 2019;12:100142.
10.1016/j.scp.2019.100142 ↗11. Sudhakar, MP, Magesh Peter, D, Dharani, G. Studies on the development and characterization of bioplastic film from the red seaweed (Kappaphycus alvarezii). Environ Sci Pollut Control Ser 2020;28:33899–913. https://doi.org/10.1007/s11356-020-10010-z.
10.1007/s11356-020-10010-z ↗12. Islam, HBMZ, Susan, MABH, Imran, AB. Effects of plasticizers and clays on the physical, chemical, mechanical, thermal, and morphological properties of potato starch-based nanocomposite films. ACS Omega 2020;5:17543–52. https://doi.org/10.1021/acsomega.0c02012.
10.1021/acsomega.0c02012 ↗13. Van Roijen, EC, Miller, SA. A review of bioplastics at end-of-life: linking experimental biodegradation studies and life cycle impact assessments. Resour Conserv Recycl 2022;181:106236. https://doi.org/10.1016/j.resconrec.2022.106236.
10.1016/j.resconrec.2022.106236 ↗14. Vartiainen, J, Vähä-Nissi, M, Harlin, A. Biopolymer films and coatings in packaging applications – a review of recent developments. Mater Sci Appl 2014;05:708–18. https://doi.org/10.4236/msa.2014.510072.
10.4236/msa.2014.510072 ↗15. Rosenboom, JG, Langer, R, Traverso, G. Bioplastics for a circular economy. Nat Rev Mater 2022;7:1–21. https://doi.org/10.1038/s41578-021-00407-8.
10.1038/s41578-021-00407-8 ↗16. Silva, RRA, Marques, CS, Arruda, TR, Teixeira, SC, de Oliveira, TV. Biodegradation of polymers: stages, measurement, standards and prospects. Macromolecules 2023;3:371–99. https://doi.org/10.3390/macromol3020023.
10.3390/macromol3020023 ↗17. Chinthapalli, R, Skoczinski, P, Carus, M, Baltus, W, de Guzman, D, Käb, H, et al.. Biobased building blocks and polymers – global capacities, production and trends, 2018–2023. Ind Biotechnol 2019;15:237–41. https://doi.org/10.1089/ind.2019.29179.rch.
10.1089/ind.2019.29179.rch ↗18. Matthews, C, Moran, F, Jaiswal, AK. A review on European Union’s strategy for plastics in a circular economy and its impact on food safety. J Clean Prod 2021;283:125263. https://doi.org/10.1016/j.jclepro.2020.125263.
10.1016/j.jclepro.2020.125263 ↗20. Akhtar, IH, Athar, H. Water supply and effective rainfall impacts on major crops across irrigated areas of Punjab, Pakistan. Theor Appl Climatol 2020;142:1097–116. https://doi.org/10.1007/s00704-020-03337-7.
10.1007/s00704-020-03337-7 ↗21. Atiwesh, G, Mikhael, A, Parrish, CC, Banoub, J, Le, TAT. Environmental impact of bioplastic use: a review. Heliyon 2021;7:e07918. https://doi.org/10.1016/j.heliyon.2021.e07918.
10.1016/j.heliyon.2021.e07918 ↗22. Khoo, HH, Tan, RBH. Environmental impacts of conventional plastic and bio-based carrier bags. Int J Life Cycle Assess 2010;15:338–45. https://doi.org/10.1007/s11367-010-0163-8.
10.1007/s11367-010-0163-8 ↗23. Bangar, SP, Purewal, SS, Trif, M, Maqsood, S, Kumar, M, Manjunatha, V, et al.. Functionality and applicability of starch-based films: an eco-friendly approach. Foods 2021;10:2181. https://doi.org/10.3390/foods10092181.
10.3390/foods10092181 ↗24. Vilchez, AC, Villasuso, AL, Wilke, N. Biophysical properties of lipid membranes from barley roots during low-temperature exposure and recovery. Langmuir 2023;39:11664–74. https://doi.org/10.1021/acs.langmuir.3c01244.
10.1021/acs.langmuir.3c01244 ↗25. Roy, K, Thory, R, Sinhmar, A, Pathera, AK, Nain, V. Development and characterization of nano starch-based composite films from mung bean (Vigna radiata). Int J Biol Macromol 2020;144:242–51. https://doi.org/10.1016/j.ijbiomac.2019.12.113.
10.1016/j.ijbiomac.2019.12.113 ↗26. Mostafa, NA, Farag, AA, Abo-dief, HM, Tayeb, AM. Production of biodegradable plastic from agricultural wastes. Arab J Chem 2018;11:546–53. https://doi.org/10.1016/j.arabjc.2015.04.008.
10.1016/j.arabjc.2015.04.008 ↗28. Ogunsona, E, Ojogbo, E, Mekonnen, T. Advanced material applications of starch and its derivatives. Eur Polym J 2018;108:570–81. https://doi.org/10.1016/j.eurpolymj.2018.09.039.
10.1016/j.eurpolymj.2018.09.039 ↗29. Chen, GQ, Patel, MK. Plastics derived from biological sources: present and future: a technical and environmental review. Chem Rev 2011;112:2082–99. https://doi.org/10.1021/cr200162d.
10.1021/cr200162d ↗30. Abera, G, Woldeyes, B, Demash, HD, Miyake, G. The effect of plasticizers on thermoplastic starch films developed from the indigenous Ethiopian tuber crop Anchote (Coccinia abyssinica) starch. Int J Biol Macromol 2020;155:581–7. https://doi.org/10.1016/j.ijbiomac.2020.03.218.
10.1016/j.ijbiomac.2020.03.218 ↗31. Zuo, Y, Gu, J, Tan, H, Zhang, Y. Thermoplastic starch prepared with different plasticizers: relation between degree of plasticization and properties. J Wuhan Univ Technol Mater Sci Ed 2015;30:423–8. https://doi.org/10.1007/s11595-015-1164-z.
10.1007/s11595-015-1164-z ↗32. Galdeano, MC, Mali, S, Grossmann, MVE, Yamashita, F, García, MA. Effects of plasticizers on the properties of oat starch films. Mater Sci Eng C 2009;29:532–8. https://doi.org/10.1016/j.msec.2008.09.034.
10.1016/j.msec.2008.09.034 ↗33. Chavan, P, Sinhmar, A, Sharma, S, Dufresne, A, Thory, R, Kaur, M, et al.. Nanocomposite starch films: a new approach for biodegradable packaging materials. Starch Stärke 2022;20:2100302. https://doi.org/10.1002/star.202100302.
10.1002/star.202100302 ↗34. Onyeaka, H, Obileke, K, Makaka, G, Nwokolo, N. Current research and applications of starch-based biodegradable films for food packaging. Polymers 2022;14:1126. https://doi.org/10.3390/polym14061126.
10.3390/polym14061126 ↗35. Coppola, G, Gaudio, MT, Lopresto, CG, Calabro, V, Curcio, S, Chakraborty, S. Bioplastic from renewable biomass: a facile solution for a greener environment. Earth Syst Environ 2021;5:231–51. https://doi.org/10.1007/s41748-021-00208-7.
10.1007/s41748-021-00208-7 ↗36. Narancic, T, Cerrone, F, Beagan, N, O’Connor, KE. Recent advances in bioplastics: application and biodegradation. Polymers 2020;12:920. https://doi.org/10.3390/polym12040920.
10.3390/polym12040920 ↗37. Mohite, AS, Jagtap, AR, Avhad, MS, More, AP. Recycling of major agriculture crop residues and its application in polymer industry: a review in the context of waste to energy nexus. Energy Nexus 2022;7:100134. https://doi.org/10.1016/j.nexus.2022.100134.
10.1016/j.nexus.2022.100134 ↗38. Majeed, A, Muhammad, Z. Potato production in Pakistan: challenges and prospective management strategies – a review. Pakistan J Bot 2018;50:2077–84.
39. Bezirhan Arikan, E, Bilgen, HD. Production of bioplastic from potato peel waste and investigation of its biodegradability. Int Adv Res Eng J 2019;3:93–7. https://doi.org/10.35860/iarej.420633.
10.35860/iarej.420633 ↗40. Siqueira, LV, Arias, CILF, Maniglia, BC, Tadini, CC. Starch-based biodegradable plastics: methods of production, challenges and future perspectives. Curr Opin Food Sci 2021;38:122–30. https://doi.org/10.1016/j.cofs.2020.10.020.
10.1016/j.cofs.2020.10.020 ↗41. Farahnaky, A, Saberi, B, Majzoobi, M. Effect of glycerol on physical and mechanical properties of wheat starch edible films. J Texture Stud 2013;44:176–86. https://doi.org/10.1111/jtxs.12007.
10.1111/jtxs.12007 ↗42. Marichelvam, MK, Jawaid, M, Asim, M. Corn and rice starch-based bio-plastics as alternative packaging materials. Fibers 2019;7:32. https://doi.org/10.3390/fib7040032.
10.3390/fib7040032 ↗43. Müller, CMO, Yamashita, F, Laurindo, JB. Evaluation of the effects of glycerol and sorbitol concentration and water activity on the water barrier properties of cassava starch films through a solubility approach. Carbohydr Polym 2008;72:82–7. https://doi.org/10.1016/j.carbpol.2007.07.026.
10.1016/j.carbpol.2007.07.026 ↗44. Athijayamani, A, Thiruchitrambalam, M, Natarajan, U, Pazhanivel, B. Effect of moisture absorption on the mechanical properties of randomly oriented natural fibers/polyester hybrid composite. Mater Sci Eng A 2009;517:344–53. https://doi.org/10.1016/j.msea.2009.04.027.
10.1016/j.msea.2009.04.027 ↗45. Krishnamurthy, A, Amritkumar, P. Synthesis and characterization of eco-friendly bioplastic from low-cost plant resources. SN Appl Sci 2019;1:1432. https://doi.org/10.1007/s42452-019-1460-x.
10.1007/s42452-019-1460-x ↗46. Teodoro, AP, Mali, S, Romero, N, de Carvalho, GM. Cassava starch films containing acetylated starch nanoparticles as reinforcement: physical and mechanical characterization. Carbohydr Polym 2015;126:9–16. https://doi.org/10.1016/j.carbpol.2015.03.021.
10.1016/j.carbpol.2015.03.021 ↗47. Amir, P, Ahmadian, Z, Najafi, M. Interactions between polyols and wheat biopolymers in a bread model system fortified with inulin: a Fourier transform infrared study. Heliyon 2018;4:e01017–7.
10.1016/j.heliyon.2018.e01017 ↗48. Li, H, Huneault, MA. Comparison of sorbitol and glycerol as plasticizers for thermoplastic starch in TPS/PLA blends. J Appl Polym Sci 2010;119:2439–48. https://doi.org/10.1002/app.32956.
10.1002/app.32956 ↗49. Gontard, N, Sonesson, U, Birkved, M, Majone, M, Bolzonella, D, Celli, A, et al.. A research challenge vision regarding management of agricultural waste in a circular bio-based economy. Crit Rev Environ Sci Technol 2018;48:614–54. https://doi.org/10.1080/10643389.2018.1471957.
10.1080/10643389.2018.1471957 ↗50. Karan, H, Funk, C, Grabert, M, Oey, M, Hankamer, B. Green bioplastics as part of a circular bioeconomy. Trends Plant Sci 2019;24:237–49. https://doi.org/10.1016/j.tplants.2018.11.010.
10.1016/j.tplants.2018.11.010 ↗51. Ili Balqis, AM, Nor, KMAR, Russly, AR, Nur Hanani, ZA. Effects of plasticizers on the physicochemical properties of kappa-carrageenan films extracted from Eucheuma cottonii. Int J Biol Macromol 2017;103:721–32. https://doi.org/10.1016/j.ijbiomac.2017.05.105.
10.1016/j.ijbiomac.2017.05.105 ↗52. Isotton, FS, Bernardo, GL, Baldasso, C, Rosa, LM, Zeni, M. The plasticizer effect on preparation and properties of etherified corn starchs films. Ind Crop Prod 2015;76:717–24. https://doi.org/10.1016/j.indcrop.2015.04.005.
10.1016/j.indcrop.2015.04.005 ↗53. Idriss, IM. Role of bio-based plasticizers in mitigating polymer membranes fragility and brittleness. Amplitudo J Sci Technol Innov 2024;3:128–39. https://doi.org/10.56566/amplitudo.v3i2.245.
10.56566/amplitudo.v3i2.245 ↗54. Sasaki, T, Matsuki, J. Effect of wheat starch structure on swelling power. Cereal Chem J 1998;75:525–9. https://doi.org/10.1094/cchem.1998.75.4.525.
10.1094/CCHEM.1998.75.4.525 ↗55. González-Torres, B, Robles-García, MÁ, Gutiérrez-Lomelí, M, Padilla-Frausto, JJ, Navarro-Villarruel, CL, Del-Toro-Sánchez, CL, et al.. Combination of sorbitol and glycerol, as plasticizers, and oxidized starch improves the physicochemical characteristics of films for food preservation. Polymers 2021;13:3356. https://doi.org/10.3390/polym13193356.
10.3390/polym13193356 ↗57. Ma, C, Tan, C, Xie, J, Yuan, F, Tao, H, Guo, L, et al.. Effects of different ratios of mannitol to sorbitol on the functional properties of sweet potato starch films. Int J Biol Macromol 2023;242:124914–4. https://doi.org/10.1016/j.ijbiomac.2023.124914.
10.1016/j.ijbiomac.2023.124914 ↗58. Ooi, ZX, Ismail, H, Bakar, AA, Aziz, A. The comparison effect of sorbitol and glycerol as plasticizing agents on the properties of biodegradable polyvinyl alcohol/rambutan skin waste flour blends. Polym-Plast Technol Eng 2012;51:432–7. https://doi.org/10.1080/03602559.2011.639827.
10.1080/03602559.2011.639827 ↗59. Thakur, R, Saberi, B, Pristijono, P, Stathopoulos, CE, Golding, JB, Scarlett, CJ, et al.. Use of response surface methodology (RSM) to optimize pea starch–chitosan novel edible film formulation. J Food Sci Technol 2017;54:2270–8. https://doi.org/10.1007/s13197-017-2664-y.
10.1007/s13197-017-2664-y ↗60. Basiak, E, Lenart, A, Debeaufort, F. How glycerol and water contents affect the structural and functional properties of starch-based edible films. Polymers 2018;10:412. https://doi.org/10.3390/polym10040412.
10.3390/polym10040412 ↗61. Ballesteros-Mártinez, L, Pérez-Cervera, C, Andrade-Pizarro, R. Effect of glycerol and sorbitol concentrations on mechanical, optical, and barrier properties of sweet potato starch film. NFS J 2020;20:1–9. https://doi.org/10.1016/j.nfs.2020.06.002.
10.1016/j.nfs.2020.06.002 ↗62. Quintana, DN, Sanabria, DP, Castro, HF, Roa, KL, Paredes, RA, Vargas, YC. Physical characterization of biopolymers with starch from potato and cassava organic wastes polymerized in water. J Phys Conf Ser 2021;2139:012015–5. https://doi.org/10.1088/1742-6596/2139/1/012015.
10.1088/1742-6596/2139/1/012015 ↗63. Liu, H, Adhikari, R, Guo, Q, Adhikari, B. Preparation and characterization of glycerol plasticized (high-amylose) starch–chitosan films. J Food Eng 2013;116:588–97. https://doi.org/10.1016/j.jfoodeng.2012.12.037.
10.1016/j.jfoodeng.2012.12.037 ↗64. Ng, JS, Kiew, PL, Lam, MK, Yeoh, WM, Ho, MY. Preliminary evaluation of the properties and biodegradability of glycerol- and sorbitol-plasticized potato-based bioplastics. Int J Environ Sci Technol 2021;6.
10.1007/s13762-021-03213-5 ↗65. Patel, M, Islam, S, Kallem, P, Patel, R, Banat, F, Patel, A. Potato starch-based bioplastics synthesized using glycerol–sorbitol blend as a plasticizer: characterization and performance analysis. Int J Environ Sci Technol 2022;3.
10.1007/s13762-022-04492-2 ↗66. Liu, H, Chaudhary, D, Yusa, S, Tadé, MO. Glycerol/starch/Na+-montmorillonite nanocomposites: a XRD, FTIR, DSC and 1H NMR study. Carbohydr Polym 2011;83:1591–7. https://doi.org/10.1016/j.carbpol.2010.10.018.
10.1016/j.carbpol.2010.10.018 ↗67. Zhang, Y, Han, JH. Plasticization of pea starch films with monosaccharides and polyols. J Food Sci 2006;71:E253–61. https://doi.org/10.1111/j.1750-3841.2006.00075.x.
10.1111/j.1750-3841.2006.00075.x ↗68. Srinivasa Rao, L, Naidu, CD, Tiwari, S. Investigation on synthesis, structure and degradability of starch based bioplastics. Mater Today Proc 2021;49:257–61.
10.1016/j.matpr.2021.01.917 ↗69. Yuliana, M, Huynh, LH, Ho, QP, Truong, CT, Ju, YH. Defatted cashew nut shell starch as renewable polymeric material: isolation and characterization. Carbohydr Polym 2012;87:2576–81. https://doi.org/10.1016/j.carbpol.2011.11.044.
10.1016/j.carbpol.2011.11.044 ↗70. Nguyen Vu, HP, Lumdubwong, N. Starch behaviors and mechanical properties of starch blend films with different plasticizers. Carbohydr Polym 2016;154:112–20. https://doi.org/10.1016/j.carbpol.2016.08.034.
10.1016/j.carbpol.2016.08.034 ↗71. AABA, M, Hasan, Z, Omran, AAB, Elfaghi, AM, Khattak, MA, Ilyas, RA, et al.. Effect of various plasticizers in different concentrations on physical, thermal, mechanical, and structural properties of wheat starch-based films. Polymers 2023;15:63.
10.3390/polym15010063 ↗72. Tsou, CH, Suen, MC, Yao, WH, Yeh, JT, Wu, CS, Tsou, CY, et al.. Preparation and characterization of bioplastic-based green renewable composites from tapioca with acetyl tributyl citrate as a plasticizer. Materials 2014;7:5617–32. https://doi.org/10.3390/ma7085617.
10.3390/ma7085617 ↗73. Shafqat, A, Al-Zaqri, N, Tahir, A, Alsalme, A. Synthesis and characterization of starch based bioplatics using varying plant-based ingredients, plasticizers and natural fillers. Saudi J Biol Sci 2021;28:1739–49. https://doi.org/10.1016/j.sjbs.2020.12.015.
10.1016/j.sjbs.2020.12.015 ↗74. Eslami, Z, Elkoun, S, Robert, M, Adjallé, K. A review of the effect of plasticizers on the physical and mechanical properties of alginate-based films. Molecules 2023;28:6637–7. https://doi.org/10.3390/molecules28186637.
10.3390/molecules28186637 ↗75. Averous, L, Boquillon, N. Biocomposites based on plasticized starch: thermal and mechanical behaviours. Carbohydr Polym 2004;56:111–22. https://doi.org/10.1016/j.carbpol.2003.11.015.
10.1016/j.carbpol.2003.11.015 ↗76. Jayarathna, S, Andersson, M, Andersson, R. Recent advances in starch-based blends and composites for bioplastics applications. Polymers 2022;14:4557. https://doi.org/10.3390/polym14214557.
10.3390/polym14214557 ↗77. Harussani, MM, Sapuan, SM, Firdaus, AHM, El-Badry, YA, Hussein, EE, El-Bahy, ZM. Determination of the tensile properties and biodegradability of cornstarch-based biopolymers plasticized with sorbitol and glycerol. Polymers 2021;13:3709. https://doi.org/10.3390/polym13213709.
10.3390/polym13213709 ↗78. Bourtoom, T, Chinnan, MS. Preparation and properties of rice starch–chitosan blend biodegradable film. LWT Food Sci Technol 2008;41:1633–41. https://doi.org/10.1016/j.lwt.2007.10.014.
10.1016/j.lwt.2007.10.014 ↗79. Amin, MR, Chowdhury, MA, Kowser, MA. Characterization and performance analysis of composite bioplastics synthesized using titanium dioxide nanoparticles with corn starch. Heliyon 2019;5:e02009. https://doi.org/10.1016/j.heliyon.2019.e02009.
10.1016/j.heliyon.2019.e02009 ↗80. Kozłowska, J, Skopińska-Wiśniewska, J, Kaczmarek-Szczepańska, B, Grabska-Zielińska, S, Makurat-Kasprolewicz, B, Michno, A, et al.. Gelatin and gelatin/starch-based films modified with sorbitol for wound healing. J Mech Behav Biomed Mater 2023;148:106205–5. https://doi.org/10.1016/j.jmbbm.2023.106205.
10.1016/j.jmbbm.2023.106205 ↗81. Paola, DM, Lupi, FR, Santo, GD, Calabrò, V, Calabrò, V. Formulation and process investigation of glycerol/starch suspensions for edible films production by tape casting. Chem Pap 2021;76:1525–38. https://doi.org/10.1007/s11696-021-01956-6.
10.1007/s11696-021-01956-6 ↗82. Jeziórska, R, Szadkowska, A, Studziński, M, Chmielarek, M, Spasowka, E. Morphology and selected properties of modified potato thermoplastic starch. Polymers 2023;15:1762–2. https://doi.org/10.3390/polym15071762.
10.3390/polym15071762 ↗83. Ibrahim, MIJ, Sapuan, SM, Zainudin, ES, Zuhri, MYM. Physical, thermal, morphological, and tensile properties of cornstarch-based films as affected by different plasticizers. Int J Food Prop 2019;22:925–41. https://doi.org/10.1080/10942912.2019.1618324.
10.1080/10942912.2019.1618324 ↗84. Valentina, L, Silva, MJ, Farayde, MF, Augustus, R. Plant-based films for food packaging as a plastic waste management alternative: potato and cassava starch case. Polymers 2024;16:2390–0.
10.3390/polym16172390 ↗85. Abotbina, W, Sapuan, SM, Sultan, MTH, Alkbir, MFM, Ilyas, RA. Development and characterization of cornstarch-based bioplastics packaging film using a combination of different plasticizers. Polymers 2021;13:3487–7. https://doi.org/10.3390/polym13203487.
10.3390/polym13203487 ↗86. Santana, RF, Bonomo, RCF, Gandolfi, ORR, Rodrigues, LB, Santos, LS, dos Santos Pires, AC, et al.. Characterization of starch-based bioplastics from jackfruit seed plasticized with glycerol. J Food Sci Technol 2018;55:278–86. https://doi.org/10.1007/s13197-017-2936-6.
10.1007/s13197-017-2936-6 ↗87. Sanyang, M, Sapuan, S, Jawaid, M, Ishak, M, Sahari, J. Effect of plasticizer type and concentration on tensile, thermal and barrier properties of biodegradable films based on sugar palm (Arenga pinnata) starch. Polymers 2015;7:1106–24. https://doi.org/10.3390/polym7061106.
10.3390/polym7061106 ↗88. Huzaisham, NA, Marsi, N. Utilization of banana (Musa Paradisiaca) peel as bioplastic for planting bag application. UTHM Institutional Repository (Universiti Tun Hussein Onn Malaysia); 2020.
89. Tang, X, Alavi, S, Herald, TJ. Effects of plasticizers on the structure and properties of starch–clay nanocomposite films. Carbohydr Polym 2008;74:552–8. https://doi.org/10.1016/j.carbpol.2008.04.022.
10.1016/j.carbpol.2008.04.022 ↗90. La Fuente, CIA, do Val Siqueira, L, Augusto, PED, Tadini, CC. Casting and extrusion processes to produce bio-based plastics using cassava starch modified by the dry heat treatment (DHT). Innov Food Sci Emerg Technol 2022;75:102906. https://doi.org/10.1016/j.ifset.2021.102906.
10.1016/j.ifset.2021.102906 ↗91. Jeyasubramanian, K, Balachander, R. Starch bioplastic film as an alternative food-packaging material. J Achiev Mater Manuf Eng 2016;75:78–84. https://doi.org/10.5604/17348412.1228383.
10.5604/17348412.1228383 ↗92. Żołek-Tryznowska, Z, Kałuża, A. The influence of starch origin on the properties of starch films: packaging performance. Materials 2021;14:1146. https://doi.org/10.3390/ma14051146.
10.3390/ma14051146 ↗93. Jumaidin, R, Sapuan, SM, Jawaid, M, Ishak, MR, Sahari, J. Thermal, mechanical, and physical properties of seaweed/sugar palm fibre reinforced thermoplastic sugar palm starch/agar hybrid composites. Int J Biol Macromol 2017;97:606–15. https://doi.org/10.1016/j.ijbiomac.2017.01.079.
10.1016/j.ijbiomac.2017.01.079 ↗94. Nampoothiri, KM, Nair, NR, John, RP. An overview of the recent developments in polylactide (PLA) research. Bioresour Technol 2010;101:8493–501. https://doi.org/10.1016/j.biortech.2010.05.092.
10.1016/j.biortech.2010.05.092 ↗95. Siracusa, V, Blanco, I. Bio-polyethylene (bio-PE), bio-polypropylene (bio-PP) and bio-poly(ethylene terephthalate) (bio-PET): recent developments in bio-based polymers analogous to petroleum-derived ones for packaging and engineering applications. Polymers 2020;12:1641. https://doi.org/10.3390/polym12081641.
10.3390/polym12081641 ↗96. Ferreira, FV, Cividanes, LS, Gouveia, RF, Lona, LMF. An overview on properties and applications of poly(butylene adipate-co-terephthalate)-PBAT based composites. Polym Eng Sci 2017;59:E7–15. https://doi.org/10.1002/pen.24770.
10.1002/pen.24770 ↗97. Dilshad, E, Waheed, H, Ali, U, Amin, A, Ahmed, I. General structure and classification of bioplastics and biodegradable plastics. Bioplast Sustain Dev 2021:61–82.
10.1007/978-981-16-1823-9_2 ↗98. Phadke, G, Rawtani, D. Bioplastics as polymeric building blocks: paving the way for greener and cleaner environment. Eur Polym J 2023;199:112453–3. https://doi.org/10.1016/j.eurpolymj.2023.112453.
10.1016/j.eurpolymj.2023.112453 ↗99. Jiang, T, Duan, Q, Zhu, J, Liu, H, Yu, L. Starch-based biodegradable materials: challenges and opportunities. Adv Ind Eng Polym Res 2019;3:8–18. https://doi.org/10.1016/j.aiepr.2019.11.003.
10.1016/j.aiepr.2019.11.003 ↗