Enhanced flexural properties of aramid fiber/epoxy composites by graphene oxide
Source abstract
Abstract
Abstract The reinforcing effect of graphene oxide (GO) in enhancing the flexural strength and flexural modulus of aramid fiber (AF)/epoxy composites were investigated with GO-AFs at a weight fraction of 0.1-0.7%. The flexural strength and flexural modulus of the composite reached 87.16 MPa and 1054.7 MPa, respectively, which were about 21.19% and 40.86% higher than those of the pure epoxy resin, respectively. In addition, the flexural properties and interfacial shear strength (IFSS) of composite reinforced by GO-AFs were much higher than the composites reinforced by AFs due to GO improved the interfacial bonding between the reinforcement material and matrix.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Natural Fiber Reinforced Composites · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (92)
Show source-provided references
1. Study of the validity of the three-point bending test for pharmaceutical round tablets using finite element method modeling10.1002/jps.23898 ↗
2. Contrast on tensile and flexural properties of glass powder reinforced epoxy composites: pilot study10.1002/app.34469 ↗
3. Improved interlaminar shear strength of glass fiber/epoxy composites by graphene oxide modified short glass fiber10.1088/2053-1591/ab2254 ↗
4. An experimental study on mechanical properties of epoxy-matrix composites containing graphite filler10.1016/j.prostr.2016.02.011 ↗
5. Deposition of carbon nanotubes onto aramid fibers using as-received and chemically modified fibers10.1016/j.apsusc.2016.05.037 ↗
6. A review on the tensile properties of natural fiber reinforced polymer composites10.1016/j.compositesb.2011.01.010 ↗
7. Mechanism of cement paste reinforced by graphene oxide/carbon nanotubes composites with enhanced mechanical properties10.1039/C5RA18602A ↗
8. Limiting role of crystalline domain orientation on the modulus and strength of aramid fibers10.1016/j.polymer.2018.02.018 ↗
9. Novel application of graphene oxide to improve hydrophilicity and mechanical strength of aramid nanofiber hybrid membrane10.1016/j.compositesa.2018.04.023 ↗
10. Nondestructive grafting of PEI on aramid fiber surface through the coordination of Fe (III) to enhance composite interfacial properties10.1016/j.apsusc.2017.01.051 ↗
11. Effect of coupling agents on polymer-filler surface interactions, morphology and properties of fiber-reinforced thermoplastics
12. Dispersions of aramid nanofibers: a new nanoscale building block10.1021/nn2014003 ↗
13. Improving the interfacial strength of PMMA resin composites by chemically grafting graphene oxide on UHMWPE fiber10.1080/09276440.2018.1439646 ↗
14. Improved cryogenic interlaminar shear strength of glass fabric/epoxy composites by graphene oxide10.1016/j.compositesb.2014.12.023 ↗
15. Amino graphene oxide/dopamine modified aramid fibers: preparation, epoxy nanocomposites and property analysis10.1016/j.polymer.2019.02.021 ↗
16. Hybridization effects on tensile and bending behavior of aramid/basalt fiber reinforced epoxy composites
17. Some basic aspects of polymer nanocomposites: A critical review10.1016/j.nanoms.2019.02.006 ↗
18. Novel application of graphene oxide to improve hydrophilicity and mechanical strength of aramid nanofiber hybrid membrane10.1016/j.compositesa.2018.04.023 ↗
19. Limiting role of crystalline domain orientation on the modulus and strength of aramid fibers10.1016/j.polymer.2018.02.018 ↗
20. Measurement of the elastic properties and intrinsic strength of monolayer graphene10.1126/science.1157996 ↗
21. Influence of aramid fiber treatment and carbon nanotubes on the interfacial strength of polypropylene hierarchical composites10.1016/j.compositesb.2017.04.006 ↗
22. Improved mechanical properties of carbon fiber/graphene oxideepoxy hybrid composites10.1016/j.compscitech.2016.09.007 ↗
23. Verpoest I., Interfacial shear strength of a glass fiber/epoxy bonding in composites modified with carbon nanotubes10.1016/j.compscitech.2010.04.010 ↗
24. A review on the tensile properties of natural fiber reinforced polymer composites10.1016/j.compositesb.2011.01.010 ↗
25. Improved synthesis of graphene oxide10.1021/nn1006368 ↗
26. Graphene oxide films, fibers and membranes
27. Measurement of the elastic properties and intrinsic strength of monolayer graphene10.1126/science.1157996 ↗
28. Comparison of carbon nanotubes and graphene oxide coated carbon fiber for improving the interfacial properties of carbon fiber/epoxy composites
29. Amino graphene oxide/dopamine modified aramid fibers: preparation, epoxy nanocomposites and property analysis10.1016/j.polymer.2019.02.021 ↗
30. Improved cryogenic interlaminar shear strength of glass fabric/epoxy composites by graphene oxide10.1016/j.compositesb.2014.12.023 ↗
31. Aqueous dispersion of polyurethane nanocomposites based on calix[4]arenes modified graphene oxide nanosheets: preparation, characterization, and anti-corrosion properties10.1016/j.cej.2018.05.111 ↗
32. Effect of coupling agents on polymer-filler surface interactions, morphology and properties of fiber-reinforced thermoplastics
33. Improving the interfacial and flexural properties of carbon fiber-epoxy composites via the grafting of a hyperbranched aromatic polyamide onto a carbon fiber surface on the basis of solution polymerization
34. Deposition of carbon nanotubes onto aramid fibers using as-received and chemically modified fibers10.1016/j.apsusc.2016.05.037 ↗
35. Verpoest I., Interfacial shear strength of a glass fiber/epoxy bonding in composites modified with carbon nanotubes10.1016/j.compscitech.2010.04.010 ↗
36. Effect of the carbon nanotube functionalization on flexural properties of multiscale carbon fiber/epoxy composites manufactured by VARIM10.1016/j.compositesb.2012.09.063 ↗
37. Hybridization effects on tensile and bending behavior of aramid/basalt fiber reinforced epoxy composites
38. Synthesis and mechanical properties of Al matrix composites reinforced with few-layer graphene and graphene oxide10.1016/j.jallcom.2017.08.268 ↗
39. Improving the interfacial strength of PMMA resin composites by chemically grafting graphene oxide on UHMWPE fiber10.1080/09276440.2018.1439646 ↗
40. Aramid fiber with excellent interfacial properties suitable for resin composite in a wide polarity range10.1016/j.cej.2018.04.149 ↗
41. Synthesis and mechanical properties of Al matrix composites reinforced with few-layer graphene and graphene oxide10.1016/j.jallcom.2017.08.268 ↗
42. Improving the interfacial and flexural properties of carbon fiber-epoxy composites via the grafting of a hyperbranched aromatic polyamide onto a carbon fiber surface on the basis of solution polymerization
43. An experimental study on mechanical properties of epoxy-matrix composites containing graphite filler10.1016/j.prostr.2016.02.011 ↗
44. Morphological and physical properties of a thermoplastic polyurethane reinforced with functionalized graphene sheet10.1002/pi.2549 ↗
45. Surface modification and characterization of aramid fibers with hybrid coating10.1016/j.apsusc.2014.09.196 ↗
46. Morphological and physical properties of a thermoplastic polyurethane reinforced with functionalized graphene sheet10.1002/pi.2549 ↗
47. Aqueous dispersion of polyurethane nanocomposites based on calix[4]arenes modified graphene oxide nanosheets: preparation, characterization, and anti-corrosion properties10.1016/j.cej.2018.05.111 ↗
48. Grafting degradable coordination polymer on aramid fiber surface to improve its interfacial properties10.1016/j.matlet.2018.08.134 ↗
49. Recent advances in fiber/matrix interphase engineering for polymer composites10.1016/j.pmatsci.2015.02.003 ↗
50. The effect of graphene oxide (GO) nanoparticles on the processing of epoxy/glass fiber composites using resin infusion10.1007/s00170-015-7427-1 ↗
51. Graphene oxide films, fibers and membranes
52. Graphene and its analogues
53. Mechanical and thermal properties of epoxy resin nanocomposites reinforced with graphene oxide10.1080/03602559.2011.625381 ↗
54. Highly tunable interfacial adhesion of glass fiber by hybrid multilayers of graphene oxide and aramid nanofiber10.1021/am5082364 ↗
55. Nondestructive grafting of PEI on aramid fiber surface through the coordination of Fe (III) to enhance composite interfacial properties10.1016/j.apsusc.2017.01.051 ↗
56. Surface modification of aramid fibers with graphene oxide for interface improvement in composites10.1007/s10443-018-9718-9 ↗
57. Silver nanoparticles/graphene oxide decorated carbon fiber synergistic reinforcement in epoxy-based composites10.1016/j.polymer.2017.10.049 ↗
58. Dispersions of aramid nanofibers: a new nanoscale building block10.1021/nn2014003 ↗
59. Highly improved UV resistance and composite interfacial properties of aramid fiber via iron (III) coordination10.1016/j.apsusc.2017.10.227 ↗
60. Preparation of graphitic oxide10.1021/ja01539a017 ↗
61. Surface modification and characterization of aramid fibers with hybrid coating10.1016/j.apsusc.2014.09.196 ↗
62. Silver nanoparticles/graphene oxide decorated carbon fiber synergistic reinforcement in epoxy-based composites10.1016/j.polymer.2017.10.049 ↗
63. Chemical methods for the production of graphenes10.1038/nnano.2009.58 ↗
64. Graphene and its analogues
65. Enhanced mechanical and thermal properties of short carbon fiber reinforced polypropylene composites by graphene oxide
66. Mechanical and thermal properties of epoxy resin nanocomposites reinforced with graphene oxide10.1080/03602559.2011.625381 ↗
67. The effect of graphene oxide (GO) nanoparticles on the processing of epoxy/glass fiber composites using resin infusion10.1007/s00170-015-7427-1 ↗
68. Grafting degradable coordination polymer on aramid fiber surface to improve its interfacial properties10.1016/j.matlet.2018.08.134 ↗
69. Silane coupling agents used for natural fiber/polymer composites: a review10.1016/j.compositesa.2010.03.005 ↗
70. Study of the validity of the three-point bending test for pharmaceutical round tablets using finite element method modeling10.1002/jps.23898 ↗
71. Influence of aramid fiber treatment and carbon nanotubes on the interfacial strength of polypropylene hierarchical composites10.1016/j.compositesb.2017.04.006 ↗
72. Highly tunable interfacial adhesion of glass fiber by hybrid multilayers of graphene oxide and aramid nanofiber10.1021/am5082364 ↗
73. Improved synthesis of graphene oxide10.1021/nn1006368 ↗
74. Effects of fiber surface treatments on mechanical properties of epoxy composites reinforced with glass fabric
75. Effect of the carbon nanotube functionalization on flexural properties of multiscale carbon fiber/epoxy composites manufactured by VARIM10.1016/j.compositesb.2012.09.063 ↗
76. Aramid fiber with excellent interfacial properties suitable for resin composite in a wide polarity range10.1016/j.cej.2018.04.149 ↗
77. Enhanced mechanical and thermal properties of short carbon fiber reinforced polypropylene composites by graphene oxide
78. Highly improved UV resistance and composite interfacial properties of aramid fiber via iron (III) coordination10.1016/j.apsusc.2017.10.227 ↗
79. Effect of carbon nanotube (CNT) functionalization in epoxy-CNT composites10.1515/ntrev-2018-0068 ↗
80. Mechanism of cement paste reinforced by graphene oxide/carbon nanotubes composites with enhanced mechanical properties10.1039/C5RA18602A ↗
81. Recent advances in fiber/matrix interphase engineering for polymer composites10.1016/j.pmatsci.2015.02.003 ↗
82. Effect of carbon nanotube (CNT) functionalization in epoxy-CNT composites10.1515/ntrev-2018-0068 ↗
83. Preparation of graphitic oxide10.1021/ja01539a017 ↗
84. Some basic aspects of polymer nanocomposites: A critical review10.1016/j.nanoms.2019.02.006 ↗
85. Comparison of carbon nanotubes and graphene oxide coated carbon fiber for improving the interfacial properties of carbon fiber/epoxy composites
86. Chemical methods for the production of graphenes10.1038/nnano.2009.58 ↗
87. Surface modification of aramid fibers with graphene oxide for interface improvement in composites10.1007/s10443-018-9718-9 ↗
88. Improved interlaminar shear strength of glass fiber/epoxy composites by graphene oxide modified short glass fiber10.1088/2053-1591/ab2254 ↗
89. Effects of fiber surface treatments on mechanical properties of epoxy composites reinforced with glass fabric
90. Contrast on tensile and flexural properties of glass powder reinforced epoxy composites: pilot study10.1002/app.34469 ↗
91. Silane coupling agents used for natural fiber/polymer composites: a review10.1016/j.compositesa.2010.03.005 ↗
92. Improved mechanical properties of carbon fiber/graphene oxideepoxy hybrid composites10.1016/j.compscitech.2016.09.007 ↗