Enhancing ultra-early strength of sulphoaluminate cement-based materials by incorporating graphene oxide
Source abstract
Abstract
Abstract In order to meet the increasing engineering requirements, the ultra-early strength of sulphoaluminate cement (SAC)-based materials need to be improved to achieve road repair, engineering rescue and other objectives. Graphene oxide (GO) of 0.04 wt% was incorporated into SAC mortar to prepare GO enhanced SAC mortar (GO-SAC). It was found that the compressive strength of GO-SAC was increased by 46.9% at the age of 6 hours, and the flexural strength of GO-SAC was increased by 121.4% at the age of 100 minutes, compared with the control SAC mortar. The mechanism analysis based on the characterization results derived from XRD, BET, in situ ATR-FTIR, hydration heat measurement, TG–DSC and SEM showed that, the addition of minute quantities of GO led to the formation and growth of ribbon-like AFt,which further resulted in the improvement of the ultra-early strength of GO-SAC. This work indicates that GO has great potential for practical application in the preparation of high-performance SAC-based materials with ultra-early strength.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Civil Engineering, Harbin Institute of Technology , Harbin 150090 , China
Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education, Harbin Institute of Technology , Harbin 150090 , China
Key Lab of Smart Prevention and Mitigation of Civil Engineering Disasters of the Ministry of Industry and Information Technology, Harbin Institute of Technology , Harbin 150090 , China
Liaoning provincial transportation Planning and Design Institute Co., Ltd , Shenyang 110111 , China
Faculty of Architectural, Civil Engineering and Environment, Ningbo University , Ningbo 315000 , China
References (56)
Show source-provided references
1. Cho C.-G., Kim Y.-Y., Feo L., Hui D., Cyclic responses of reinforced concrete composite columns strengthened in the plastic hinge region by HPFRC mortar, Compos. Struct., 2012, 94, 2246-2253.10.1016/j.compstruct.2012.01.025 ↗
2. Xie X., Zhou Z., Jiang M., Xu X., Wang Z., Hui D., Cellulosic fibers from rice straw and bamboo used as reinforcement of cement-based composites for remarkably improving mechanical properties, Compos. Part. B-Eng., 2015, 78, 153-161.10.1016/j.compositesb.2015.03.086 ↗
3. Liu Y., Wang M., Wang W., Ohmic heating curing of electrically conductive carbon nanofiber/cement-based composites to avoid frost damage under severely low temperature, Compos. Part A-Appl. S., 2018, 115, 236-246.10.1016/j.compositesa.2018.10.008 ↗
4. Liu C., Deng X., Liu J., Hui D., Mechanical properties and microstructures of hypergolic and calcined coal gangue based geopolymer recycled concrete, Constr. Build. Mater., 2019, 221, 691-708.10.1016/j.conbuildmat.2019.06.048 ↗
5. Lang L., Duan H., Chen B., Properties of pervious concrete made from steel slag and magnesium phosphate cement, Constr. Build. Mater., 2019, 209, 95-104.10.1016/j.conbuildmat.2019.03.123 ↗
6. Juenger M.C.G., Winnefeld F., Provis J.L., Ideker J.H., Advances in alternative cementitious binders, Cement. Concrete. Res., 2011, 41, (12), 1232-1243.10.1016/j.cemconres.2010.11.012 ↗
7. Gartner E., Industrially interesting approaches to “low-CO2” cements, Constr. Build. Mater., 2004, 34, (9), 1489-1498.10.1016/j.cemconres.2004.01.021 ↗
8. Cabrera J.G., Al-Hasan A.S., Performance properties of concrete repair materials, Constr. Build. Mater., 1997, 11, (5), 283-290.10.1016/S0950-0618(97)00049-4 ↗
9. Gastaldini A.L.G., Isaia G.C., Saciloto A.P., Missau F., Hoppe T.F., Influence of curing time on the chloride penetration resistance of concrete containing rice husk ash: A technical and economical feasibility study, Cement. Concrete. Comp., 2010, 32, (10), 783-793.10.1016/j.cemconcomp.2010.08.001 ↗
10. Glasser F.P., Zhang L., High-performance cement matrices based on calcium sulfoaluminate–belite compositions, Cement. Concrete. Res., 2001, 31, (12), 1881-1886.10.1016/S0008-8846(01)00649-4 ↗
11. Li G., Zhang J., Song Z., Shi C., Zhang A., Improvement of workability and early strength of calcium sulphoaluminate cement at various temperature by chemical admixtures, Constr. Build. Mater., 2018, 160, 427-439.10.1016/j.conbuildmat.2017.11.076 ↗
12. Wang K., Lomboy G., Developing Green, Highly Flowable, Rapid Set, High-Performance Concrete for Pavement Patch Repair, In-Trans Project Reports., 2016.
13. Guo T., Xie Y., Weng X., Evaluation of the bond strength of a novel concrete for rapid patch repair of pavements, Constr. Build. Mater., 2018, 186, 790-800.10.1016/j.conbuildmat.2018.08.007 ↗
14. Making pavements safe: Cement provides fast-setting and durable road repairs, Roads & Bridges, 2018, 56, (10), 56-57.
15. Kwon B.J., Kim D., Rhee S.K., Kim Y.R., Spray injection patching for pothole repair using 100 percent reclaimed asphalt pavement, Constr. Build. Mater., 2018, 166, 445-451.10.1016/j.conbuildmat.2018.01.145 ↗
16. Wang S., Liu B., Zhao P., Lu L., Cheng X., Effect of early-strength-enhancing agents on setting time and early mechanical strength of belite–barium calcium sulfoaluminate cement, J. Therm. Anal. Calorim., 2018, 131, (3), 2337-2343.10.1007/s10973-017-6837-8 ↗
17. Aggoun S., Cheikh-Zouaoui M., Chikh N., Duval R., Effect of some admixtures on the setting time and strength evolution of cement pastes at early ages, Constr. Build.Mater., 2008, 22, (2), 106-110.10.1016/j.conbuildmat.2006.05.043 ↗
18. Dodson V., Concrete Admixture-Set Accelerating Admixtures, VN Reinhold, New York ,1990.10.1007/978-1-4757-4843-7 ↗
19. Thilgavathi S., Dhinakaran G., Venkataramana J., Durability of Fly Ash Concrete to Chloride Ingress, Iup. J. Struct. Eng., 2010, 3, (3), 47-65.
20. Yuan Q., Shi C., De Schutter G., Audenaert K., Deng D., Chloride binding of cement-based materials subjected to external chloride environment-A review, Constr. Build. Mater., 2009, 23, (1), 1-13.10.1016/j.conbuildmat.2008.02.004 ↗
21. Castellote M., Andrade C., Alonso C., Chloride-binding isotherms in concrete submitted to non-steady-state migration experiments, Cement. Concrete. Res., 1999, 29, (11), 1799-1806.10.1016/S0008-8846(99)00173-8 ↗
22. Xiao L.I., Liang L., Liu Z.D., Niu W.Y., Zhang Q., Zhang Z.B., Effect of Supplementary Curing after Steam-curing on Performance of Concrete, Bulletin Chin. Ceram. Soc., 2015, 852, 1376-1382.10.4028/www.scientific.net/MSF.852.1376 ↗
23. Nazari A., Riahi S., Effects of CuO nanoparticles on compressive strength of self-compacting concrete, Sadhana-Acad. P. Eng. S., 2011, 36, (3), 371.10.1007/s12046-011-0023-7 ↗
24. Naskar S., Chakraborty A.K., Effect of nano materials in geopolymer concrete, Perspectives in Science, 2016, 8, 273-275.10.1016/j.pisc.2016.04.049 ↗
25. Qin L., Gao X., Chen T., Influence of mineral admixtures on carbonation curing of cement paste, Constr. Build. Mater., 2019, 212, 653-662.10.1016/j.conbuildmat.2019.04.033 ↗
26. Adamu M., Mohammed B.S., Shafiq N., Shahir Liew M., Effect of crumb rubber and nano silica on the fatigue performance of roller compacted concrete pavement, Cogent Engineering, 2018, 5, (1), 1436027.10.1080/23311916.2018.1436027 ↗
27. Zhang W., Han B., Yu X., Ruan Y., Ou J., Nano boron nitride modified reactive powder concrete, Constr. Build. Mater., 2018, 179, 186-197.10.1016/j.conbuildmat.2018.05.244 ↗
28. Mokhtar M.M., Abo-El-Enein S.A., Hassaan M.Y., Morsy M.S., Khalil M.H., Mechanical performance, pore structure and microstructural characteristics of graphene oxide nano platelets reinforced cement, Constr. Build. Mater., 2017, 138, 333-339.10.1016/j.conbuildmat.2017.02.021 ↗
29. Dreyer D.R., Park S., Bielawski C.W., Ruoff R.S., The chemistry of graphene oxide, Chem. Soc. Rev., 2010, 39, (1), 228-240.10.1039/B917103G ↗
30. Warner J.H., Schaffel F., Rummeli M., Bachmatiuk A., Graphene: fundamentals and emergent applications, 2012, Newnes.
31. Cruz-Silva R., Endo M., Terrones M., Graphene oxide films, fibers, and membranes, Nanotechnol. Rev., 2016, 5, 377-391.10.1515/ntrev-2015-0041 ↗
32. Zepeng J., Bin Z., Chunya L., Weicong K., Jingxian Z., Yongqiang X., Shaozao T., Xiang C., Langhuan H., Carboxymethyl cellulose-grafted graphene oxide for efficient antitumor drug delivery, Nanotechnol. Rev., 2018, 7, 291-301.10.1515/ntrev-2018-0029 ↗
33. Suk J.W., Piner R.D., An J., Ruoff R.S., Mechanical properties of monolayer graphene oxide, Acs. Nano., 2010, 4, (11), 6557-6564.10.1021/nn101781v ↗
34. Chen W., Lv G., Hu W., Li D., Chen S., Dai Z., Synthesis and applications of graphene quantum dots: a review, Nanotechnol. Rev., 2018, 7, 157-185.10.1515/ntrev-2017-0199 ↗
35. Ghazizadeh S., Duffour P., Skipper N., Billing M., Bai Y.J.C., Research C., An investigation into the colloidal stability of graphene oxide nano-layers in alite paste, Cement. Concrete. Comp., 2017, 99, 116-128.10.1016/j.cemconres.2017.05.011 ↗
36. Shaikh F.U., Supit S.W., Barbhuiya S., Microstructure and nanoscaled characterization of HVFA cement paste containing nano-SiO2 and nano-CaCO3, J. Mater. Civil. Eng., 2017, 29, (8), 04017063.10.1061/(ASCE)MT.1943-5533.0001898 ↗
37. Lv S., Ma Y., Qiu C., Sun T., Liu J., Zhou Q., Effect of graphene oxide nanosheets of microstructure and mechanical properties of cement composites, Constr. Build. Mater., 2013, 49, 121-127.10.1016/j.conbuildmat.2013.08.022 ↗
38. Lv S., Liu J., Sun T., Ma Y., Zhou Q., Effect of GO nanosheets on shapes of cement hydration crystals and their formation process, Constr. Build. Mater., 2014, 64, 231-239.10.1016/j.conbuildmat.2014.04.061 ↗
39. Sharma S., Kothiyal N.C., Comparative effects of pristine and ball-milled graphene oxide on physico-chemical characteristics of cement mortar nanocomposites, Constr. Build. Mater., 2016, 115, 256-268.10.1016/j.conbuildmat.2016.04.019 ↗
40. Lv S., Hu H., Hou Y., Lei Y., Sun L., Zhang J., Liu L.J.N., Investigation of the Effects of Polymer Dispersants on Dispersion of GO Nanosheets in Cement Composites and Relative Microstructures/Performances, Nanomaterials, 2018, 8, 964.10.3390/nano8120964 ↗
41. Gong K., Pan Z., Koraye, A.H., Qiu L., Li D., Collins F., Wang C.M., Duan W.H., Reinforcing effects of graphene oxide on portland cement paste, J. Mater. Civil. Eng., 2014, 27, (2), A4014010.10.1061/(ASCE)MT.1943-5533.0001125 ↗
42. Pan Z., He L., Qiu L., Korayem A.H., Li G., Zhu J.W., Collins F., Li D., Duan W. H., Wang M.C., Mechanical properties and microstructure of a graphene oxide–cement composite, Cement Concrete Comp., 2015, 58, 140-147.10.1016/j.cemconcomp.2015.02.001 ↗
43. Coumes C.C.D., Dhoury M., Champenois J.-B., Mercier C., Damidot D., Combined effects of lithium and borate ions on the hydration of calcium sulfoaluminate cement, Cement. Concrete. Res., 2017, 97, 50-60.10.1016/j.cemconres.2017.03.006 ↗
44. Li G., He T., Hu D., Shi C., Effects of two retarders on the fluidity of pastes plasticized with aminosulfonic acid-based superplasticizers, Constr. Build. Mater., 2012, 26, (1), 72-78.10.1016/j.conbuildmat.2011.05.004 ↗
45. Jiahui P., Zonghan L., Study on the Formation Mechanism of Ettringite, J. Chin. Ceram. Soc. (in Chinese), 2000, 28, (6), 511-515.
46. Popoola O.O., Kriven W.M., Young J.F., Microstructural and Microchemical Characterization of a Calcium Aluminate-Polymer Composite (MDF Cement), J. Am. Ceram. Soc., 1991, 74, (8), 1928-1933.10.1111/j.1151-2916.1991.tb07811.x ↗
47. Han J., Yan P., Influence of lithium compound on sulphoaluminate cement hydration process, Journal of the Chinese Ceramic Society, 2010, 38, (4), 608-614.
48. Ghazizadeh S., Duffour P., Skipper N.T., Bai Y., Understanding the behaviour of graphene oxide in Portland cement paste, Cement. Concrete. Res., 2018, 111, 169-182.10.1016/j.cemconres.2018.05.016 ↗
49. Ma B., Zhu Y., Hu D., Li H., Influence of calcium formate on sulphoaluminate cement hydration and harden process at early age, J. Appl. Biomater. Fun., 2013, 44, 1763-1767.
50. Lv S., Ting S., Liu J., Zhou Q., Use of graphene oxide nanosheets to regulate the microstructure of hardened cement paste to increase its strength and toughness, Crystengcomm., 2014, 16, (36), 8508-8516.10.1039/C4CE00684D ↗
51. Shen C., Pan M., Hua Z., Yuan R., Aluminate cement/graphite conductive composite bipolar plate for proton exchange membrane fuel cells, J. Power. Sources., 2007, 166, (2), 419-423.10.1016/j.jpowsour.2007.01.082 ↗
52. Wang P., Li N., Xu L., Hydration evolution and compressive strength of calcium sulphoaluminate cement constantly cured over the temperature range of 0 to 80°C, Cement. Concrete. Res., 2017, 100, 203-213.10.1016/j.cemconres.2017.05.025 ↗
53. Ylmén R., Jäglid U., Panas I., Monitoring Early Hydration of Cement by Ex Situ and In Situ ATR-FTIR – a Comparative Study, J. Am. Ceram. Soc., 2014, 97, (11), 3669-3675.10.1111/jace.13186 ↗
54. Björnström J., Panas I., Antagonistic effect of superplasticizer and colloidal nano-silica in the hydration of Alite and Belite pastes, J. Mater. Sci., 2007, 42, (11), 3901-3907.10.1007/s10853-006-0467-z ↗
55. Oltulu M., Şahin R., Effect of nano-SiO2, nano-Al2O3 and nano-Fe2O3 powders on compressive strengths and capillary water absorption of cement mortar containing fly ash: A comparative study, Energ. Buildings, 2013, 58, 292-301.10.1016/j.enbuild.2012.12.014 ↗
56. Senff L., Hotza D., Lucas S., Ferreira V., Labrincha J. A., Effect of nano-SiO2 and nano-TiO2 addition on the rheological behavior and the hardened properties of cement mortars, Mat. Sci. Eng. A, 2012, 532, 354-361.10.1016/j.msea.2011.10.102 ↗