journal article·2022-04-04Open access

Mechanical properties and microstructure of nano-strengthened recycled aggregate concrete

Yuanxun Zheng, Yahui Zhang, Jingbo Zhuo, Peng Zhang, Weixing Kong

Nanotechnology Reviews· Volume 11· Issue 1

Abstract

Abstract The surface adhesion mortar of recycled coarse aggregate (RCA) is the main factor leading to poor aggregate quality, and it also affects the internal structure and mechanical properties of recycled aggregate concrete (RAC). To improve the quality of RCA and mechanical properties of RAC, self-developed mortar removal equipment was used to strengthen the RCA. Then, the RCA was soaked in 1, 2, and 3% nano-silica solutions, and the vibration-mixing process was used to improve the quality of RAC. In addition, the microstructure of the RAC was examined via scanning electron microscopy to observe its improvement effect on the microstructure of the RAC. The results indicated that the quality of the RCA was improved by mechanical and physical strengthening, and the water-absorption rate and crushing value decreased by 32.9 and 23.9%, respectively. The improvement effect of nano-immersion on the RAC was obvious. The optimal condition was a combination of physical strengthening, 2 days of immersion in 2% NS solution, and vibration stirring. The 28 day compressive strength increased by 31.3%, the splitting tensile strength increased by 23%, and the flexural strength increased by 49%. The proposed strengthening method improves the mechanical properties and microstructure of RAC. The results of this study provided a technical reference for the mechanical strengthening of RAC and promotion of the application and popularization of RAC.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Water Conservancy Engineering, Zhengzhou University , Zhengzhou , 450001 , China

References (52)

Show source-provided references
1. Guo H, Shi C, Guan X, Zhu J, Ding Y, Ling T, et al. Durability of recycled aggregate concrete – A review. Cem Concr Compos. 2018;89:251–9.10.1016/j.cemconcomp.2018.03.008 ↗
2. Evangelista L, de Brito J. Durability performance of concrete made with fine recycled concrete aggregates. Cem Concr Compos. 2010;32(1):9–14.10.1016/j.cemconcomp.2009.09.005 ↗
3. Eguchi K, Teranishi K, Nakagome A. Application of recycled coarse aggregate by mixture to concrete construction. Constr Build Mater. 2007;21(7):1542–51.10.1016/j.conbuildmat.2005.12.023 ↗
4. Bru K, Touzé S, Bourgeois F. Assessment of a microwave-assisted recycling process for the recovery of high-quality aggregates from concrete waste. Int J Miner Process. 2014;126:90–8.10.1016/j.minpro.2013.11.009 ↗
5. Wang L, Wang J, Qian X. An environmentally friendly method to improve the quality of recycled concrete aggregates. Constr Build Mater. 2017;144:432–41.10.1016/j.conbuildmat.2017.03.191 ↗
6. Li L, Poon C, Xiao J. Effect of carbonated recycled coarse aggregate on the dynamic compressive behavior of recycled aggregate concrete. Constr Build Mater. 2017;151:52–62.10.1016/j.conbuildmat.2017.06.043 ↗
7. Zhao Z, Wang S, Lu L. Evaluation of pre-coated recycled aggregate for concrete and mortar. Constr Build Mater. 2013;43:191–6.10.1016/j.conbuildmat.2013.01.032 ↗
8. Dimitriou G, Savva P, Petrou M. Enhancing mechanical and durability properties of recycled aggregate concrete. Constr Build Mater. 2018;158:228–35.10.1016/j.conbuildmat.2017.09.137 ↗
9. Tam V, Tam C, Le K. Removal of cement mortar remains from recycled aggregate using pre-soaking approaches. Resour Conserv Recycl. 2007;50(1):82–101.10.1016/j.resconrec.2006.05.012 ↗
10. Marta S, Pila A. Study on the influence of attached mortar content on the properties of recycled concrete aggregate. Constr Build Mater. 2008;23(2):872–7.10.1016/j.conbuildmat.2008.04.012 ↗
11. Shima H, Tateyashiki H, Matsuhashi R. An advanced concrete recycling technology and its applicability assessment through input-output analysis. J Adv Concr. 2005;3(1):53–67.10.3151/jact.3.53 ↗
12. Akbarnezhad A, Ong K, Zhang M. Microwave-assisted beneficiation of recycled concrete aggregates. Constr Build Mater. 2011;25(8):3469–79.10.1016/j.conbuildmat.2011.03.038 ↗
13. Mukharjee B, Barai S. Influence of Nano-Silica on the properties of recycled aggregate concrete. Constr Build Mater. 2014;55:29–37.10.1016/j.conbuildmat.2014.01.003 ↗
14. Shaikh F, Chavda V, Minhaj N. Effect of mixing methods of nano silica on properties of recycled aggregate concrete. Struct Concr. 2018;19(2):387–99.10.1002/suco.201700091 ↗
15. Szostak B, Golewski GL. Effect of nano admixture of CSH on selected strength parameters of concrete including Fly Ash. IOP conference series Mater Sci Eng C. 2018;416(1):12105.10.1088/1757-899X/416/1/012105 ↗
16. Szostak B, Golewski GL. Rheology of cement pastes with siliceous fly ash and the CSH nano-admixture. Mater. 2021;14(13):3640.10.3390/ma14133640 ↗
17. Golewski GL, Szostak B. Application of the C–S–H phase nucleating agents to improve the performance of sustainable concrete composites containing fly ash for use in the precast concrete industry. Mater. 2021;14(21):6514.10.3390/ma14216514 ↗
18. Gao C, Huang L, Yan L. Mechanical properties of recycled aggregate concrete modified by nano-particles. Constr Build Mater. 2020;241:118030–30.10.1016/j.conbuildmat.2020.118030 ↗
19. Shaban W, Yang J, Su H. Properties of recycled concrete aggregates strengthened by different types of pozzolan slurry. Constr Build Mater. 2019;216:632–47.10.1016/j.conbuildmat.2019.04.231 ↗
20. Zeng W, Zhao Y, Zheng H. Improvement in corrosion resistance of recycled aggregate concrete by nano silica suspension modification on recycled aggregates. Cem Concr Compos. 2020;106:103476.10.1016/j.cemconcomp.2019.103476 ↗
21. Li W, Luo Z, Long C. Effects of nanoparticle on the dynamic behaviors of recycled aggregate concrete under impact loading. Mate Design. 2016;112:58–66.10.1016/j.matdes.2016.09.045 ↗
22. Nuaklong P, Sata V, Wongsa A. Recycled aggregate high calcium fly ash geopolymer concrete with inclusion of OPC and nano-SiO2. Constr Build Mater. 2018;174:244–52.10.1016/j.conbuildmat.2018.04.123 ↗
23. Golewski GL, Szostak B. Strengthening the very early-age structure of cementitious composites with coal fly ash via incorporating a novel nanoadmixture based on C–S–H phase activators. Constr Build Mater. 2021;312:125426.10.1016/j.conbuildmat.2021.125426 ↗
24. Golewski GL. Evaluation of fracture processes under shear with the use of DIC technique in fly ash concrete and accurate measurement of crack path lengths with the use of a new crack tip tracking method. Measurement. 2021;181:109632.10.1016/j.measurement.2021.109632 ↗
25. Golewski GL. Validation of the favorable quantity of fly ash in concrete and analysis of crack propagation and its length – Using the crack tip tracking (CTT) method – In the fracture toughness examinations under Mode II, through digital image correlation. Constr Build Mater. 2021;296:122362.10.1016/j.conbuildmat.2021.122362 ↗
26. Abdelgadir A, Gholamreza F. Durability of recycled aggregate concrete designed with equivalent mortar volume method. Cem Concr Compos. 2009;31(8):555–63.10.1016/j.cemconcomp.2009.02.012 ↗
27. Ismail S, Ramli M. Engineering properties of treated recycled concrete aggregate (RCA) for structural applications. Constr Build Mater. 2013;44:464–76.10.1016/j.conbuildmat.2013.03.014 ↗
28. Xiong G, Wang C, Zhou S, Jia X, Luo W, Liu J, et al. Preparation of high strength lightweight aggregate concrete with the vibration mixing process. Constr Build Mater. 2019;229:116936.10.1016/j.conbuildmat.2019.116936 ↗
29. Shaban W, Elbaz K, Yang J. Effect of pozzolan slurries on recycled aggregate concrete: Mechanical and durability performance. Constr Build Mater. 2021;276:121940.10.1016/j.conbuildmat.2020.121940 ↗
30. Zhang P, Wang K, Wang J, Guo J, Ling Y. Macroscopic and microscopic analyses on mechanical performance of metakaolin/fly ash based geopolymer mortar. J Clean Prod. 2021;294:126193.10.1016/j.jclepro.2021.126193 ↗
31. Erdem S, Hanbay S, Güler Z. Micromechanical damage analysis and engineering performance of concrete with colloidal nano-silica and demolished concrete aggregates. Constr Build Mater. 2018;171:634–42.10.1016/j.conbuildmat.2018.03.197 ↗
32. Byung-Wan J, Chang-Hyun K, Jae-Hoon L. Characteristics of cement mortar with nano-SiO2 Particles. Constr Build Mater. 2008;21:1351–5.10.1016/j.conbuildmat.2005.12.020 ↗
33. Li W, Luo Z, Long C. Effects of nanoparticle on the dynamic behaviors of recycled aggregate concrete under impact loading. Mater Design. 2016;112:58–66.10.1016/j.matdes.2016.09.045 ↗
34. Sanchez F, Sobolev K. Nanotechnology in concrete – A review. Constr Build Mater. 2010;24(11):2060–71.10.1016/j.conbuildmat.2010.03.014 ↗
35. Song X, Li C, Chen D. Interfacial mechanical properties of recycled aggregate concrete reinforced by nano-materials. Constr Build Mater. 2021;270:121446.10.1016/j.conbuildmat.2020.121446 ↗
36. Wang R, Yu N, Li Y. Methods for improving the microstructure of recycled concrete aggregate: A review. Constr Build Mater. 2020;242:118164.10.1016/j.conbuildmat.2020.118164 ↗
37. Mukharjee B, Barai S. Influence of incorporation of nano-silica and recycled aggregates on compressive strength and microstructure of concrete. Constr Build Mater. 2014;55:29–37.10.1016/j.conbuildmat.2014.01.003 ↗
38. Li C. Mechanical and transport properties of recycled aggregate concrete modified with limestone powder. Compos Part B-Eng. 2020;197:108189.10.1016/j.compositesb.2020.108189 ↗
39. Wang L, Lu X, Liu L, Xiao J, Zhang G, Guo F, et al. Influence of MgO on the hydration and shrinkage behavior of low heat Portland cement-based materials via pore structural and fractal analysis. Fractal Fract. 2022;6:40.10.3390/fractalfract6010040 ↗
40. Wang L, Guo FX, Yang HM, Wang Y. Comparison of fly ash, PVA fiber, MgO and shrinkage-reducing admixture on the frost resistance of face slab concrete via pore structural and fractal analysis. Fractals. 2021;29(2):2140002.10.1142/S0218348X21400028 ↗
41. Wang L, Luo R, Zhang W, Jin M, Tang S. Effects of fineness and content of phosphorus slag on cement hydration, permeability, pore structure and fractal dimension of concrete. Fractals. 2021;29(2):2140004.10.1142/S0218348X21400041 ↗
42. Tao M, Zhang J, Wei H, Shen J. Effect of nano-strengthening on the properties and microstructure of recycled concrete. Nanotechnol Rev. 2020;9(1):79–92.10.1515/ntrev-2020-0008 ↗
43. Zhang C, Sun Y, Xu J. The effect of vibration mixing on the mechanical properties of steel fiber concrete with different mix ratios. Mater. 2021;14(13):3669.10.3390/ma14133669 ↗
44. Zhang P, Ling Y, Wang J, Shi Y. Bending resistance of PVA fiber reinforced cementitious composites containing nano-SiO2. Nanotechnol Rev. 2019;8(1):690–8.10.1515/ntrev-2019-0060 ↗
45. Ling Y, Zhang P, Wang J, Chen Y. Effect of PVA fiber on mechanical properties of cementitious composite with and without nano-SiO2. Constr Build Mater. 2019;229:117068.10.1016/j.conbuildmat.2019.117068 ↗
46. Ling Y, Zhang P, Wang J, Taylor P, Hu S. Effects of nanoparticles on engineering performance of cementitious composites reinforced with PVA fibers. Nanotechnol Rev. 2020;9(1):504–14.10.1515/ntrev-2020-0038 ↗
47. Gao Z, Zhang P, Wang J, Wang K, Zhang T. Interfacial properties of geopolymer mortar and concrete substrate: Effect of polyvinyl alcohol fiber and nano-SiO2 contents. Constr Build Mater. 2022;315:125735.10.1016/j.conbuildmat.2021.125735 ↗
48. Zhang P, Sha D, Li Q, Zhao S, Ling Y. Effect of nano silica particles on impact resistance and durability of concrete containing coal fly ash. Nanomaterials. 2021;11(5):1296.10.3390/nano11051296 ↗
49. Zhang P, Wang K, Wang J, Guo J, Hu S, Ling Y. Mechanical properties and prediction of fracture parameters of geopolymer/alkali-activated mortar modified with PVA fiber and nano-SiO2. Ceram Int. 2020;46:(12)20027–37.10.1016/j.ceramint.2020.05.074 ↗
50. Wang K, Zhang P, Guo J, Gao Z. Single and synergistic enhancement on durability of geopolymer mortar by polyvinyl alcohol fiber and nano-SiO2. J Mater Res Technol. 2021;15:6367–86.10.1016/j.jmrt.2021.09.036 ↗
51. Zhang P, Zhang H, Cui G, Yue X, Guo J, Hui D. Effect of steel fiber on impact resistance and durability of concrete containing nano-SiO2. Nanotechnol Rev. 2021;10(1):504–17.10.1515/ntrev-2021-0040 ↗
52. Zheng Y, Zhuo J, Zhang P. A review on durability of nano-SiO2 and basalt fiber modified recycled aggregate concrete. Constr Build Mater. 2021;304:124659.10.1016/j.conbuildmat.2021.124659 ↗