Effects of the total thickness of multilayer thermite materials Al/CuO on the combustion mode and morphology of reaction products
Source abstract
Abstract
Abstract The multilayer thermite material Al/CuO is an outstanding representative of metastable intermolecular composites characterized by excellent energy and combustible properties. However, the combustion of such a material is accompanied by intensive release of gas and spraying products. In this work, it is demonstrated that in a certain thickness range (2–3 μ m) of the multilayer thermite material (Al/CuO) n formed on the surface of Sitall substrates, the reaction products remain on the surface of the substrate in the form of composite entities, in some cases resembling ladybugs. By means of high-speed video shooting from different angles, the propagation velocity of the combustion front was measured and the intensity of gas release was visually assessed depending on the thickness of the multilayer structure (Al/CuO) n . The spraying products effect becomes significant for multilayer structures (Al/CuO) 40 with a total thickness of 4 μ m. It was found that the propagation velocity of the combustion front increases with the thickness of the multilayer structure (Al/CuO) n until the effect of spraying products intensifies. The morphology and composition of the combustion products of multilayer structures were studied using scanning electron microscopy in combination with focused ion beam and energy-dispersive x-ray spectroscopy. In particular, it was found that in many cases, the composite entities are hollow inside and consist of an aluminum oxide framework, rounded fuses of metallic copper, and fragments of unreacted film multilayers. As a result of the analysis of experimental data, two combustion modes of multilayer thermocomposite materials on a substrate were described depending on the temperature of the combustion front, which are related to the thickness of the multilayer structure.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Energetic Materials and Combustion · Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. fine-tuning combustion behavior in microscale energetic lines fabricated by direct ink writing using nano thermite microspheres for applications in Pyro-MEMS10.1021/acsanm.4c03423 ↗
2. Improving the combustion efficiency and agglomeration of aluminum-water propellants via n-Al/CuO metastable intermolecular composites10.1016/j.combustflame.2023.113246 ↗
3. Construction and combustion behavior of horizontal two-dimension combustion networks of boron-metal oxides10.1016/j.enmf.2024.08.005 ↗
4. Microstructure modification of alumina prepared by water-stabilized plasma spraying method using Al-Cu-O reaction10.1016/j.jeurceramsoc.2024.03.016 ↗
5. Mitigating the negative catalytic effect of CuO by FAS-17 coated Al nanopowder: isothermal ageing of Al/CuO nanothermite at 71 °C and 60% relative humidity10.1016/j.dt.2023.11.003 ↗
6. Probing on mutual interaction mechanisms of the ingredients of Al/CuO/PVDF nanocomposites10.1021/acs.langmuir.3c01299 ↗
7. Facile fabrication of energetic nanocomposite materials by polydopamine10.3390/ijms242216199 ↗
8. Three-dimensional printing of energetic materials: a review10.1016/j.enmf.2022.04.001 ↗
9. Evaluation and design of metal-based gas-generating energetic materials10.1016/j.combustflame.2022.112615 ↗
10. Influence of composition on energetic properties of copper oxide—aluminum powder nanothermite materials formed by electrophoretic deposition10.1002/prep.202100292 ↗
11. Multilayered Al/CuO thermite formation by reactive magnetron sputtering: nano versus micro10.1063/1.3498821 ↗
12. Influence of Impurities on the front velocity of sputter deposited Al/CuO thermite multilayers10.3390/ma14237224 ↗
13. In-situ solid-state deformation-driven rapid reaction towards higher strength-ductility Al-CuO composites10.1016/j.compositesa.2024.108174 ↗
14. Additive manufacturing and combustion characteristics of polyethylene oxide/aluminum/copper oxide-based energetic nanocomposites for enhancing the propulsion of small projectiles10.3390/nano13061052 ↗
15. Joining and welding with a nanothermite and exothermic bonding using reactive multi-nanolayers—A review10.1016/j.jmapro.2021.12.056 ↗
16. Low air pressure self-sustaining combustion performances of 3D direct writing Al/CuO film10.1016/j.cej.2023.145031 ↗
17. Combustion model for thermite materials integrating explicit and coupled treatment of condensed and gas phase kinetics10.1016/j.proci.2022.08.117 ↗
18. Effects of shock-induced chemical reaction on equation of state for Ni/Al energetic structural material10.1016/j.enmf.2023.06.001 ↗
19. Combustion in reactive multilayer Ni/Al nanofoils: experiments and molecular dynamic simulation10.1016/j.combustflame.2016.01.014 ↗
20. Molecular dynamics studies in nanojoining: self-propagating reaction in Ni/Al nanocomposites10.1007/s11665-021-05520-x ↗
21. Investigation of compound formation sequence in Al/Ni/…/Al/Ni Multilayer system under conditions of an excessive amount of one component and its prediction using the analogy with gas system behavior10.1016/j.heliyon.2019.e01267 ↗
22. Modeling the pressure generation in aluminum‐based thermites10.1002/prep.201400297 ↗
23. Preparation of activated carbon nanostructured Al@CuO with low static sensitivity and high reactivity10.1021/acsomega.3c08086 ↗
24. Ignition and combustion characteristics of Al/TiB2-based nanothermites: effect of bifuel distribution10.1021/acsanm.3c05578 ↗
25. Exothermic reaction waves in multilayer nanofilms10.1070/rc2008v077n01abeh003748 ↗
26. Initial stage of titanium oxidation in Ti/CuO thermites: a molecular dynamics study using ReaxFF forcefields10.1039/d3cp00032j ↗
27. Nanosized niobium (V) and tantalum (V) oxide ceramics as competitive oxidizers within aluminium-based nanothermites10.1016/j.enmf.2021.07.001 ↗
28. Fast formation of a black inner α‐Al2O3 layer doped with CuO on Al–Cu–Li alloy by soft sparking PEO process10.1111/jace.19240 ↗
29. Al/Ni reactive multilayer films enhancing the properties of plasma induced by nanosecond pulsed laser10.1016/j.enmf.2021.04.001 ↗
30. Synthesis and characterization of porous Cu-30 at. %Al intermetallic compounds via thermal explosion: effect of porosity on the microstructure and thermal properties10.1016/j.jssc.2025.125557 ↗
31. Combustion Modes of Mixtures of Copper (II) Oxide with Aluminum and Titanium10.1134/s0010508221050063 ↗
32. Underwater wet welding of high-strength low-alloy steel using self-shielded flux-cored wire with highly exothermic Al/CuO mixture10.1016/j.jmatprotec.2024.118404 ↗
33. Effect of copper in the stabilization of Al/CuO energetic semiconductor bridge10.1063/5.0189436 ↗
34. Achieving superior ignition and combustion performance of Al/I2O5 biocidal nanoenergetic materials by CuO addition10.1016/j.combustflame.2023.113190 ↗
35. Combustion synthesis of zero-, one-, two- and three-dimensional nanostructures: current trends and future perspectives10.1016/j.pecs.2017.07.002 ↗
36. Joining with reactive nano-multilayers: influence of thermal properties of components on joint microstructure and mechanical performance10.3390/app9020262 ↗
37. Highly efficient packaging processes by reactive multilayer materials for die-attach in power electronic applications10.1109/eptc.2014.7028295 ↗
38. Investigation of integrated reactive multilayer systems for bonding in microsystem technology10.3390/mi12101272 ↗
39. Analysis of selective bonding processes using reactive multi-layers for system integration on LTCC based SiPs10.1007/s00542-022-05328-2 ↗
40. Engineering of Al/CuO reactive multilayer thin films for tunable initiation and actuation10.1002/prep.201800045 ↗
41. Reactive multilayer nanofilms: time of scientific and technological maturity10.59761/rcr5106 ↗
42. Layered Al/CuO thin films for tunable ignition and actuations10.3390/nano10102009 ↗
43. A review of nano-reactive multilayered films and their applications in micro-energetic igniters10.1016/j.fpc.2025.01.001 ↗
44. Nanoenergetics as pressure generator for nontoxic impact primers: comparison of Al/Bi2O3, Al/CuO, Al/MoO3 nanothermites and Al/PTFE10.1016/j.combustflame.2014.12.002 ↗
45. Influence of interface layer on the properties of exploding foil flyer generator by integrating Al/Ni multilayers10.1002/pssa.202000112 ↗
46. A “riding” combustion mode in CuO/Al reactive multilayer nano-foils10.1063/5.0109018 ↗
47. High heating rate decomposition dynamics of copper oxide by nanocalorimetry-coupled time-of-flight mass spectrometry10.1016/j.cplett.2017.09.066 ↗
48. Predicted aluminum monoxide phases and their structural evolution under pressure10.1016/j.actamat.2024.120667 ↗
49. Combustion of nano aluminum particles (review)10.1134/s0010508215020045 ↗
50. Two-dimensional aluminum monoxide nanosheets: a computational study10.1007/s11467-018-0782-2 ↗