journal article·2023-03-12

Novel ternary organic resistive switching memory doped with bipolar materials

Haoyang Li, Weixia Lan, Xian Wu, Zhiqiang Zhu, Bin Wei

Nanotechnology· Volume 34· Issue 11
Publisher page

Abstract

Abstract Organic resistive switching memory (ORSM) shows great potential for neotype memory devices due to the preponderances of simple architecture, low power consumption, high switching speed and feasibility of large-area fabrication. Herein, solution-processed ternary ORSM devices doped with bipolar materials were achieved with high ON/OFF ratio and outstanding device stability. The resistive switching performance was effectively ameliorated by doping two bipolar materials (DpAn-InAc and DpAn-5BzAc) in different blending concentration into the PVK:OXD-7 donor-accepter system. Compared with the binary system (PVK: 30 wt% OXD-7), the ON/OFF ratios of the ternary devices doped with 6 wt% DpAn-5BzAc were greatly increased from 7.91 × 102 to 4.98 × 104, with the operating voltage (∣V set–V reset∣) declined from 4.90 V to 2.25 V, respectively. Additionally, the stability of resistance state and uniformity of operating voltage were also significantly optimized for the ternary devices. For comparison, ternary devices doped with DpAn-InAc have been explored, which also achieved improved resistive switching behavior. A detailed analysis of electrical characteristics and the internal charge transfer properties of ORSM was performed to unveil the performance enhancement in ternary devices. Results indicate that the use of bipolar materials favors the efficient operation of OSRMs with proper energy level alignment and effective charge transfer.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Memory and Neural Computing · Perovskite Materials and Applications · Ferroelectric and Negative Capacitance Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Negative Photoconductance Effect: an Extension Function of the TiOx‐Based Memristor10.1002/advs.202003765 ↗
2. Photomemristive sensing via charge storage in 2D carbon nitrides10.1039/D2MH00069E ↗
3. Trends and challenges in the circuit and macro of RRAM-based computing-in-memory systems10.1016/j.chip.2022.100004 ↗
4. Solution-processed resistive switching memory devices based on hybrid organic–inorganic materials and composites10.1039/C8CP03945C ↗
5. Second-order associative memory circuit hardware implemented by the evolution from battery-like capacitance to resistive switching memory10.1016/j.isci.2022.105240 ↗
6. Multistage resistive switching processes in filament conduction-based organic memory devices10.1149/1945-7111/ab6b0a ↗
7. Donor–Acceptor Metallopolymers Containing Ferrocene for Brain Inspired Memristive Devices10.1002/aelm.202000841 ↗
8. Resistive switching memory performance of two-dimensional polyimide covalent organic framework films10.1021/acsami.0c15789 ↗
9. Fabrication of polymer composite films with carbon composite nanofibers doped MWNTs-OH for multilevel memory device application10.1016/j.compositesb.2018.08.045 ↗
10. Flexible rewritable organic memory devices using nitrogen-doped CNTs/PEDOT: PSS composites10.1016/j.orgel.2017.03.014 ↗
11. A versatile multifaceted resistive switching memory activated by light and ion irradiation in poly (3-octylthiophene)-zinc oxide hybrids10.1016/j.orgel.2020.105932 ↗
12. A graphene integrated highly transparent resistive switching memory device10.1063/1.5021099 ↗
13. Multilevel resistive memory switching in graphene sandwiched organic polymer heterostructure10.1016/j.carbon.2014.04.085 ↗
14. Switching characteristic of fabricated nonvolatile bipolar resistive switching memory (ReRAM) using PEDOT: PSS/GO10.1016/j.sse.2021.108208 ↗
15. The effect of the PVA hydrolysis degree on the electrical properties of organic resistive memories based on PVA + CNT composites10.1016/j.diamond.2021.108720 ↗
16. Resistive switching memory phenomena in PEDOT PSS: coexistence of switchable diode effect and write once read many memory10.1038/srep19594 ↗
17. Effect of a PEDOT: PSS modified layer on the electrical characteristics of flexible memristive devices based on graphene oxide: polyvinylpyrrolidone nanocomposites10.1016/j.apsusc.2018.03.035 ↗
18. Interfacial behavior of resistive switching in ITO–PVK–Al WORM memory devices10.1088/0022-3727/49/7/075104 ↗
19. Influence of blending ratio on resistive switching effect in donor-acceptor type composite of PCBM and PVK-based memory devices10.1016/j.orgel.2018.11.023 ↗
20. Resistive switching in silver/polystyrene/silver nano-gap devices10.1063/1.4831876 ↗
21. Bipolar resistive switching and nonvolatile memory effect in poly (3-hexylthiophene)–carbon nanotube composite films10.1016/j.carbon.2018.01.058 ↗
22. Asymmetric design of bipolar host materials with novel 1, 2, 4-oxadiazole unit in blue phosphorescent device10.1021/ol5002494 ↗
23. A bipolar small molecule based on indacenodithiophene and diketopyrrolopyrrole for solution processed organic solar cells10.1039/C3TA13816J ↗
24. Lead-free, air-stable hybrid organic–inorganic perovskite resistive switching memory with ultrafast switching and multilevel data storage10.1039/C8NR00863A ↗
25. Highly-efficient solution-processed green phosphorescent organic light-emitting diodes with reduced efficiency roll-off using ternary blend hosts10.1039/C9TC02701G ↗
26. Switching the resistive memory behavior from binary to ternary logic via subtle polymer donor and molecular acceptor design10.1039/D1TC00071C ↗
27. Stable charge retention in graphene-MoS2 assemblies for resistive switching effect in ultra-thin super-flexible organic memory devices10.1016/j.orgel.2018.03.039 ↗
28. Interfacial triggering of conductive filament growth in organic flexible memristor for high reliability and uniformity10.1021/acsami.9b10491 ↗
29. Azasiline-based thermally activated delayed fluorescence emitters for blue organic light emitting diodes10.1039/C6TC04653C ↗
30. Sterically shielded blue thermally activated delayed fluorescence emitters with improved efficiency and stability10.1039/C5MH00258C ↗
31. Improvement of resistive memory properties of poly (3, 4-ethylenedioxythiophene): poly (styrenesulfonate)/CH3NH3PbI3 based device by potassium iodide additives10.1016/j.jallcom.2018.12.369 ↗