journal article·2019-07-05

Characterizing the local oxidation nanolithography on highly oriented pyrolytic graphite

Zachary H Swart, Alex J Ulrich, Collin D Wick, Adarsh D Radadia

Nanotechnology· Volume 30· Issue 27
Publisher page

Abstract

Abstract Here, we characterize the patterns obtained through local oxidation nanolithography (LON) on highly oriented pyrolytic graphite as the write bias, speed, and force were varied. Different types of patterns—bumps, cracked bumps, and trenches—were obtained and characterized using four shape descriptors—pattern width, pattern height, cut width and cut depth. With an increase in write bias the obtained pattern type varied from bumps to cracked bumps to trenches. The use of a bias above 7.25 V resulted in trenches with increased variability in shape descriptor values. Similarly, an increase in write speed demonstrated a transition from trenches to cracked bumps to bumps. An increase in write force from 75 to 150 nN showed a shift in the threshold voltage from 4.25 V to just under 3.75 V and formed cracked bumps instead of bumps. These findings help solve the mystery of why bumps were not reported at threshold voltages before 2008. We believe these findings will be enable uniform reproduction and report of LON pattern.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Force Microscopy Techniques and Applications · Graphene research and applications · Carbon Nanotubes in Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Honeycomb carbon: a review of graphene10.1021/cr900070d ↗
2. Endo · 1997
4. Enhanced ionic sensitivity in solution‐gated graphene‐hexagonal boron nitride heterostructure field‐effect transistors10.1002/admt.201800133 ↗
5. Few-flakes reduced graphene oxide sensors for organic vapors with a high signal-to-noise ratio10.3390/nano7100339 ↗
6. On-chip micro gas chromatograph enabled by a noncovalently functionalized single-walled carbon nanotube sensor array10.1002/anie.200704501 ↗
7. Nanolithography and manipulation of graphene using an atomic force microscope10.1016/j.ssc.2008.06.027 ↗
8. Nanoscale tunable reduction of graphene oxide for graphene electronics10.1126/science.1188119 ↗
9. Nanoscale lithography on monolayer graphene using hydrogenation and oxidation10.1021/nn201601m ↗
10. Reversible electrical reduction and oxidation of graphene oxide10.1021/nn1014215 ↗
11. Controlled nanofabrication of highly oriented pyrolytic graphite with the scanning tunneling microscope10.1021/j100204a002 ↗
12. Nanometer‐scale hole formation on graphite using a scanning tunneling microscope10.1063/1.102201 ↗
13. Making a monolayer hole in a graphite surface by means of a scanning tunneling microscope10.1143/JJAP.29.L815 ↗
14. Mechanistic investigations of nanometer‐scale lithography at liquid‐covered graphite surfaces10.1063/1.104317 ↗
15. In situ scanning tunneling microscopy of the anodic oxidation of highly oriented pyrolytic graphite surfaces10.1021/j100331a006 ↗
16. Cutting of multiwalled carbon nanotubes by a negative voltage tip of an atomic force microscope: a possible mechanism10.1103/PhysRevB.68.113406 ↗
17. Nano-machining of highly oriented pyrolytic graphite using conductive atomic force microscope tips and carbon nanotubes10.1088/0957-4484/18/40/405306 ↗
18. Convex and concave nanodots and lines induced on HOPG surfaces by AFM voltages in ambient air10.1088/0957-4484/19/34/345302 ↗
19. Convex–concave nanostructure transition on highly oriented pyrolitic graphite surface induced by atomic force microscope tip under bias voltage10.1080/17458081003752970 ↗
20. Precise atomic force microscope cantilever spring constant calibration using a reference cantilever array10.1063/1.2764372 ↗
21. Calibration of rectangular atomic force microscope cantilevers10.1063/1.1150021 ↗
22. Conductive polycrystalline diamond probes for local anodic oxidation lithography10.1088/0957-4484/26/46/465201 ↗
23. Gwyddion: an open-source software for SPM data analysis10.2478/s11534-011-0096-2 ↗