Precursor salt assisted syntheses of high-index faceted concave hexagon and nanorod-like polyoxometalates

This paper describes an effective method for a precursor salt assisted fabrication and reshaping of two different polyoxometalates [(NH4)2Cu(MoO4)2 (ACM) and Cu3(MoO4)2(OH)2 (CMOH)] into five distinctive shapes through straightforward and indirect routes. Explicit regulation of the structural arrangements of ACM and CMOH has been studied in detail with altered precursor salt concentration employing our laboratory developed modified hydrothermal (MHT) method. Morphologically different ACM 3D architectures are evolved with higher molybdate concentration, whereas 1D growth of CMOH is observed with increased copper concentration. Interesting morphological transformation of the products has been accomplished employing one precursor salt at a time without using any other foreign reagent. It has been proven that large ACMs become labile in the presence of incoming Cu(II) and NH4(+) ions of the precursor salts. A new strategy for the conversion of faceted ACMs (hexagonal plate, circular plate and hollow flower) to exclusive CMOH nanorods through a Cu(II) assisted reaction has been adopted. According to thermodynamic consideration, the synthesis of rare concave nanostructures with high index facet is still challenging due to their higher reactivity. In this study, concave hexagonal ACM with high index facet {hkl} has been successfully prepared for the first time from hexagonal ACM through simple etching with ammonium heptamolybdate (AHM), which is another precursor salt. Hexagonal ACM corrugates to a concave hexagon because of the higher reactivity of the {001} crystal plane than that of the {010} plane. It has been shown that high index facet exposed concave hexagonal ACM serves as a better catalyst for the photodegradation of dye than the other microstructures enclosed by low index facets.