Experimental investigation of phase equilibria in the Al–Ag–Si system
Source abstract
Abstract
The phase equilibria of the Al-Ag-Si ternary system at 500 °C and 600 °C were investigated by X-ray powder diffraction (XRD) and electron probe microanalysis (EPMA). Three two-phase regions ((Al) + (Si), (Si) + Ag2Al, and (Si) + (Ag)) and two three-phase regions ((Si) + (Ag) + Ag2Al and (Si) + (Ag) + Ag2Al) were observed at 500 °C. The (Si) + Ag2Al and (Si) + (Ag) two-phase regions and (Si) + Ag2Al + liquid and (Si) + (Ag) + Ag2Al three-phase regions were identified in the isothermal section at 600 °C. A vertical section of the Al–Ag–Si system along Al0.6Si0.4–Al0.8Ag0.2 was investigated using differential scanning calorimetry (DSC) from which the temperatures of the phase-transition reactions were determined. The isothermal and vertical sections obtained in this study provide fundamental data for the thermodynamics of the Al–Ag–Si system and knowledge of the thermodynamics associated with aluminium-based alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Thermodynamic and Structural Properties of Metals and Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Creep aging behavior and performance of Al-Zn-Mg-Cu alloys under different parameters in retrogression aging treatment10.1007/s11771-022-4955-3 ↗
2. Microstructure and mechanical properties of friction stir welded powder metallurgy AA2024 alloy10.1007/s11771-022-4962-4 ↗
3. Influence of temperature on creep behavior, mechanical properties and microstructural evolution of an Al-Cu-Li alloy during creep age forming10.1007/s11771-021-4769-8 ↗
4. After Concorde: evaluation of creep resistant Al–Cu–Mg–Ag alloys
5. The effect of long term creep exposure on the microstructure and properties of an underaged Al–Cu–Mg–Ag alloy10.1016/j.scriptamat.2004.02.001 ↗
6. Elevated-temperature mechanical properties and thermal stability of Al-Cu-Mg-Ag heat-resistant alloy10.1007/s11771-014-2319-3 ↗
7. The effect of Si additions on Ω precipitation in Al–Cu–Mg–(Ag) alloys10.1016/j.scriptamat.2003.09.004 ↗
8. Design and development of an experimental wrought aluminum alloy for use at elevated temperatures10.1007/BF02628387 ↗
9. Precipitate stability in Al-Cu-Mg-Ag alloys aged at high temperatures10.1016/0956-7151(94)90381-6 ↗
10. Precipitation structure and strengthening mechanisms in an Al-Cu-Mg-Ag alloy10.1016/j.msea.2017.06.110 ↗
11. Improvement of strength and fracture toughness of a spray-deposited Al-Cu-Mg-Ag-Mn-Ti-Zr alloy by optimized heat treatments and thermomechanical treatments10.1016/0921-5093(94)09646-5 ↗
12. Influence of Si additions on the ageing process of an Al-Cu-Mg-Ag alloy10.1080/01418619408242935 ↗
13. Effect of additions of Si and Ag to ternary Al-Cu-Mg alloys in the α + S phase field10.1016/S0921-5093(96)10341-5 ↗
14. Effects of Si additions on the precipitation hardening response in Al-Cu-Mg (-Ag) alloys
15. Catalyzed precipitation in Al-Cu-Si10.1007/BF02830329 ↗
16. The role of Si on microstructure, mechanical and local corrosion behaviors of an Al–Cu–Mg–Si alloy with high Cu/Mg ratio
17. Precipitation processes in Al-Cu-Mg alloys microalloyed with Si10.1007/BF02830331 ↗
18. New investigation of phase equilibria in the system Al–Cu–Si10.1016/j.jallcom.2011.09.076 ↗
19. (aluminum-magnesium-silicon)10.1007/s11669-007-9027-8 ↗
20. The crystal structure of the β ″phase in Al–Mg–Si alloys10.1016/S1359-6454(97)00493-X ↗
21. Experimental investigation and thermodynamic optimization of the Al–Ni–Sc ternary system10.1016/j.calphad.2022.102397 ↗
22. Experimental investigation of the phase relations in the Fe-Zr-Y ternary system10.3390/ma15020593 ↗
23. Experimental investigation and thermodynamic assessment of the Al–Ag–Sc system
24. An assessment of thermodynamic equilibria in the Ag–Al–Cu–Mg quaternary system in relation to precipitation reactions
25. Ag-Al-Cu-Mg (Silver-Aluminum-Copper-Magnesium)10.1007/s11669-010-9686-8 ↗
26. Assessment of the aluminum-rich corner of the Al–Cu–Mg–(Ag) phase diagram10.1016/j.calphad.2007.08.003 ↗
27. Thermodynamic assessment of the Al-Mg-Si-Ti phase diagram for metal matrix composites design
28. Al-Cu-Si (Aluminum-Copper-Silicon)10.1007/s11669-009-9618-7 ↗
29. Phase diagram determination and thermodynamic modeling of the Cu-Mg-Si system10.2298/JMMB150515009Z ↗
30. Thermodynamic modeling of the quaternary Al-Cu-Mg-Si system10.1016/j.calphad.2017.02.002 ↗
31. Experimental investigation and thermodynamic modeling of the Cu–Ag–Si ternary system10.1016/j.jct.2020.106172 ↗
32. The Ag–Al–Cu system
33. Thermodynamic calculation of the ternary system Al-Si-C10.1016/S0364-5916(96)00027-2 ↗
34. Thermodynamic evalution of the Ag-Si system10.1016/0040-6031(88)87048-5 ↗
35. The Ag− Al (silver-aluminum) system10.1007/BF02879428 ↗
36. Calvert · 1991
37. The Ag-Si (silver-silicon) system10.1007/BF02877631 ↗
38. Franke · 2002 · vol. 19 · 151
39. Thermodynamic assessment and experimental study of the Al-Ag-Ga phase diagram10.1016/j.tca.2016.11.005 ↗
40. Zhak · J. Alloys Compd. · 1999 · 291 · 17510.1016/S0925-8388(99)00253-4 ↗
41. Stel’makhovych · J. Alloys Compd. · 2000 · 298 · 16410.1016/S0925-8388(99)00634-9 ↗
42. A thermodynamic evaluation of the Ag-Al system10.1007/BF00810049 ↗