journal article·2021-06

Effect of varying ratio of starch in melamine-formaldehyde/starch based adhesive and its properties

Rishi Raj, Susmita Dey Sadhu

Bulletin of Materials Science· Volume 44· Issue 2
Publisher page

Abstract

In this study, the adhesion strength of melamine–formaldehyde (MF) resin-based adhesives is improved manifolds by incorporating a little amount of starch in it for adhering Denim cloth. The effect of varying starch content in the adhesive has also been studied. The reaction conditions of the adhesive preparation with respect to time, temperature and pH have been optimized. To understand the right storage condition, the denim fabric after application of adhesives is stored at different conditions of humidity and temperature. Thermogravimetric analysis (TGA) and Fourier transform infrared (FTIR) have been performed to study the effect of starch on the thermal stability and to study the interactions between the chemical species of the adhesive, respectively. Scanning electron microscopy (SEM) was done to study the morphology of the adhesive. At elevated temperature, the adhesion strength was found to improve and there was no effect of high humidity (90% RH) on the adhesion strength. The effect of temperature on viscosity changes of the adhesives was also recorded. Further, the chemical resistance of the adhesive in various solvents having different pH and polarity are also studied.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photopolymerization techniques and applications · Dyeing and Modifying Textile Fibers · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Pizzi A 1987 Melamine–formaldehyde adhesives handbook of adhesive technology, 2nd edn revised and expanded. CRC Press, Florida
2. Hse C Y, Fu F and Pan H 2008 For. Prod. J. 58 56
3. Kunaver M, Medved S, Čuk N, Jasiukaityte E, Poljanšek I and Strnad T 2010 Bioresour. Technol. 101 136110.1016/j.biortech.2009.09.066 ↗
4. Zanetti M and Pizzi A 2003 J. Appl. Polym. Sci. 88 28710.1002/app.11687 ↗
5. Oh Y S and Kim K H K 2011 Sci. For. Sci. 39 99
6. Weinstabl A, Binder W H, Gruber H and Kantner W 2001 J. Appl. Polym. Sci. 81 165410.1002/app.1596 ↗
7. Kim S and Kim H J 2005 Int. J. Adhes. Adhes. 25 45610.1016/j.ijadhadh.2005.01.001 ↗
8. Čuk N, Kunaver M, Poljanšek I, Ugovšek A, Šernek M and Medved S 2015 J. Adhes. Sci. Technol. 29 155310.1080/01694243.2015.1034924 ↗
9. Čuk N, Kunaver M and Medved S 2011 Mater. Technol. 45 241
10. Gindl W and Jeronimidis G 2004 J. Mater. Sci. 39 324510.1023/B:JMSC.0000025870.09117.f6 ↗
11. Lei H and Frazier C E 2015 Int. J. Adhes. Adhes. 62 4010.1016/j.ijadhadh.2015.06.013 ↗
12. Mercer T A and Pizzi A 1994 Holzforsch Und Holzverwertung 46 51
13. Bauer D R 1986 Prog. Org. Coatings 14 93
14. Fink J K 2013 Reactive polymers: fundamentals and applications 3rd edn (William Andrew Publishing) 275193
15. Chen C, Guo W, Zhou Y, Xiao P, Li Y and Wang J 2013 Bioresources 8 327
16. Wang Z, Xue J W, Qu J B and Li W X 2012 Adv. Mater. Res. 242 560
17. Zhang Y, Zhu J, Ren H, Bi Y and Zhang L 2017 J. Sol-Gel Sci. Technol. 83 4410.1007/s10971-017-4375-2 ↗
18. Kizil R, Irudayaraj J and Seetharaman K 2002 J. Agric. Food Chem. 50 391210.1021/jf011652p ↗
19. Zhang Y, Zhu J, Ren H, Bi Y, Shi X, Wang B et al 2017 J. Porous Mater. 24 130310.1007/s10934-017-0371-8 ↗
20. Merline D J, Vukusic S and Abdala A A 2013 Polym. J. 45 41310.1038/pj.2012.162 ↗