journal article·2016-12-14

Coupled, Simultaneous Displacement and Dealloying Reactions into Fe–Ni–Co Nanowires for Thinning Nanowire Segments

Xiaohua Geng, Elizabeth J. Podlaha

Nano Letters· Volume 16· Issue 12
Publisher page

Abstract

A new methodology is reported to shape template-assisted electrodeposition of Fe-rich, Fe–Ni–Co nanowires to have a thin nanowire segment using a coupled displacement reaction with a more noble elemental ion, Cu(II), and at the same time dealloying predominantly Fe from Fe–Ni–Co by the reduction of protons (H + ), followed by a subsequent etching step. The displacement/dealloyed layer was sandwiched between two trilayers of Fe–Ni–Co to facilitate the characterization of the reaction front, or penetration length. The penetration length region was found to be a function of the ratio of proton and Cu(II) concentration, and a ratio of 0.5 was found to provide the largest penetration rate, and hence the larger thinned length of the nanowire. Altering the etching time affected the diameter of the thinned region. This methodology presents a new way to thin nanowire segments connected to larger nanowire sections and also introduces a way to study the propagation of a reaction front into a nanowire.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Nanoporous metals and alloys · Anodic Oxide Films and Nanostructures · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemical Engineering, Northeastern University, Boston, Massachusetts 02115, United States

Funding

Roche Diagnostics

References (30)

Show source-provided references
1. 10.1126/science.261.5126.131610.1126/science.261.5126.1316 ↗
2. 10.1126/science.266.5193.196110.1126/science.266.5193.1961 ↗
3. 10.1016/j.radmeas.2009.10.02810.1016/j.radmeas.2009.10.028 ↗
4. 10.1021/ic060138410.1021/ic0601384 ↗
5. 10.1021/cr500002z10.1021/cr500002z ↗
6. Sulka, G. D.; Zaraska, L.; Stepniowski, W. J.Encyclopedia of nanoscience and nanotechnology,2nd ed.Nalwa, H.S., Ed.American Scientific Publishers:Valencia, 2011; Vol. 11, pp261–349.
7. 10.1063/1.36544410.1063/1.365444 ↗
8. 10.1016/j.mee.2015.01.01610.1016/j.mee.2015.01.016 ↗
9. 10.1063/1.162145910.1063/1.1621459 ↗
10. 10.1016/j.electacta.2011.03.12610.1016/j.electacta.2011.03.126 ↗
11. 10.1021/ja803408f10.1021/ja803408f ↗
12. 10.1021/ja803343m10.1021/ja803343m ↗
13. 10.1021/nl801354910.1021/nl8013549 ↗
14. 10.1002/anie.20070200110.1002/anie.200702001 ↗
15. 10.1126/science.121282210.1126/science.1212822 ↗
16. 10.1021/nl034765r10.1021/nl034765r ↗
17. 10.1002/adma.20030163910.1002/adma.200301639 ↗
18. 10.1021/nl025531v10.1021/nl025531v ↗
19. 10.1021/nl202538q10.1021/nl202538q ↗
20. 10.1021/ja039734c10.1021/ja039734c ↗
21. 10.1021/ja073032w10.1021/ja073032w ↗
22. 10.1002/adma.20080228610.1002/adma.200802286 ↗
23. 10.1016/j.electacta.2012.04.09010.1016/j.electacta.2012.04.090 ↗
24. 10.1021/nn700255x10.1021/nn700255x ↗
25. 10.1021/nl902619q10.1021/nl902619q ↗
26. 10.1149/05311.0009ecst10.1149/05311.0009ecst ↗
27. Strickland, P.; Lawson, F.International Symposium on Hydrometallurgy;American Institute of Mining, Metallurgical, & Petroleum Engineers (AIME):New York, 1973; pp293–330.
28. Fuerstenau M. · Trans. Metall. Soc. AIME · 1968 · 242 · 1487
29. 10.1016/0013-4686(85)80200-010.1016/0013-4686(85)80200-0 ↗
30. 10.1038/3506852910.1038/35068529 ↗