journal article·2010-02-10

Nanoscale Structural Engineering via Phase Segregation: Au−Ge System

Yu-Lun Chueh, Cosima N. Boswell, Chun-Wei Yuan, Swanee J. Shin, Kuniharu Takei, Johnny C. Ho, Hyunhyub Ko, Zhiyong Fan, E. E. Haller, D. C. Chrzan, Ali Javey

Nano Letters· Volume 10· Issue 2
Publisher page

Abstract

A tunable structural engineering of nanowires based on template-assisted alloying and phase segregation processes is demonstrated. The Au-Ge system, which has a low eutectic temperature and negligible solid solubility (<10(-3) atom %) of Au in Ge at low temperatures, is utilized. Depending on the Au concentration of the initial nanowires, final structures ranging from nearly periodic nanodisk patterns to core/shell and fully alloyed nanowires are produced. The formation mechanisms are discussed in detail and characterized by in situ transmission electron microscopy and energy-dispersive spectrometry analyses. Electrical measurements illustrate the metallic and semiconducting characteristics of the fully alloyed and alternating Au/Ge nanodisk structures, respectively.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Nanowire Synthesis and Applications · ZnO doping and properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Electrical Engineering and Computer Sciences, University of California at Berkeley, Berkeley, California 94720

Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720

Berkeley Sensor and Actuator Center, University of California at Berkeley, Berkeley, California 94720

Department of Materials Science and Engineering, University of California at Berkeley, Berkeley, California 94720

References (21)

Show source-provided references
1. Lieber C. M. · MRS Bull. · 2003 · 28 · 48610.1557/mrs2003.144 ↗
2. Javey A. · ACS Nano · 2008 · 2 · 132910.1021/nn8003982 ↗
3. Wang Z. L. · Mater. Today · 2004 · 7 · 2610.1016/S1369-7021(04)00286-X ↗
4. Yang P. · MRS Bull. · 2005 · 30 · 8510.1557/mrs2005.26 ↗
5. Wang Z. L. · J. Mater. Chem. · 2005 · 15 · 102110.1039/b414550j ↗
6. Fan Z. · Nat. Mater. · 2009 · 8 · 64810.1038/nmat2493 ↗
7. Ho J. C. · Nat. Mater. · 2008 · 7 · 6210.1038/nmat2058 ↗
8. Gudiksen M. S. · Nature · 2002 · 415 · 61710.1038/415617a ↗
9. Bjork M. T. · Nano Lett. · 2002 · 2 · 8710.1021/nl010099n ↗
10. Bjork M. T. · Nano Lett. · 2002 · 2 · 8710.1021/nl010099n ↗
11. Nath V. D. · Phys. Status Solidi · 1978 · 49 · 37910.1002/pssa.2210490148 ↗
12. Wang D. · Angew. Chem., Int. Ed. · 2005 · 44 · 2
13. Sutter E. · Nano Lett. · 2008 · 8 · 41110.1021/nl0719630 ↗
14. Yuan C. W. · Appl. Phys. Lett. · 2008 · 93 · 19311410.1063/1.3027066 ↗
15. Wang N. · Mater. Sci. Eng. R · 2008 · 60 · 110.1016/j.mser.2008.01.001 ↗
16. Boswell, C. N.; Yuan, C.W.; Chrzan, D. C.Unpublished.
17. For the reactive ion etching of the HfO2capping layer, BCl3(50 sccm), N2(50 sccm), and Cl2(30 sccm) gases were used at a pressure of 250 mTorr and power of 250 W. To minimize resist heating, pulsed etching cycles consisting of 10 s of plasma being on and 30 s of plasma being off were used. The total etch time was 60 s (6 cycles).
18. Sahlng S. · Phys. B · 1996 · 219 · 75410.1016/0921-4526(95)00875-6 ↗
19. Fortune N. A. · Rev. Sci. Instrum. · 1998 · 69 · 13310.1063/1.1148488 ↗
20. Wang D. · J. Am. Chem. Soc. · 2004 · 126 · 1160210.1021/ja047435x ↗
21. Bauer M. · Appl. Phys. Lett. · 2002 · 81 · 299210.1063/1.1515133 ↗